journal article·2020-01

Structural and functional properties of BaTiO3 porous ceramics produced by using pollen as sacrificial template

Vlad Alexandru Lukacs, Roxana Stanculescu, Lavinia Curecheriu, Cristina Elena Ciomaga, Nadejda Horchidan, Cipriana Cioclea, Liliana Mitoseriu

Ceramics International· Volume 46· Issue 1
Publisher page

Abstract

Abstract The present paper reports the dependence of structural and functional properties on the porosity level with values down to 50% in BaTiO3 ceramics. Micro-porosity (pore size below 15 μm) with (0–3) connectivity has been produced by using dried pollen particles as sacrificial template. The properties of such porous ceramics are mostly affected by porosity, but also by possible small doping with foreign ions resulted from the template and by small variations of Ba/Ti stoichiometry at the ceramic-pore interfaces, as observed by a shift of the Curie temperature towards lower values when porosity level increases. The dielectric relaxation evidenced a few processes characterised by different activation energies which seem to be not affected by porosity, i.e. they might be assigned to the ceramic part and not to the ceramic-pore interfaces. When increasing porosity, a regular tilting of P(E) loops and increasing of coercivity and reducing polarization were observed, as result of reduction of active ferroelectric component and to the field inhomogeneity in such ceramics.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Ferroelectric and Piezoelectric Materials · Dielectric materials and actuators · Dielectric properties of ceramics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (45)

Show source-provided references
1. Dielectric and piezoelectric properties of PZT ceramics with anisotropic porosity10.1007/s10832-008-9553-8 ↗
2. High piezoelectric sensitivity and hydrostatic figures of merit in unidirectional porous ferroelectric ceramics fabricated by freeze casting10.1016/j.jeurceramsoc.2018.04.067 ↗
3. Enhanced pyroelectric properties of porous Ba0.67Sr0.33TiO3 ceramics fabricated with carbon nanotubes10.1016/j.jallcom.2015.02.153 ↗
4. Enhanced pyroelectric figure of merits of porous BaSn0.05Ti0.95O3 ceramics10.1016/j.jeurceramsoc.2017.05.015 ↗
5. Porous Ba0.85Ca0.15Zr0.1Ti0.9O3 ceramics for pyroelectric applications10.1007/s11664-018-6375-6 ↗
6. Using multi-walled carbon nanotubes in spark plasma sintered Pb(Zr0.47Ti0.53)O3 ceramics for tailoring dielectric and tunability properties10.1063/1.4900527 ↗
7. Study of the role of porosity on the functional properties of (Ba,Sr)TiO3 Ceramics10.1016/j.jallcom.2015.03.252 ↗
8. Porosity-dependent properties of Nb-doped Pb(Zr,Ti)O3 ceramics10.1111/jace.14587 ↗
9. Porous ferroelectrics for energy harvesting applications10.1140/epjst/e2015-02600-y ↗
10. Modelling and fabrication of porous sandwich layer barium titanate with improved piezoelectric energy harvesting figures of merit10.1016/j.actamat.2017.02.029 ↗
11. Polarization-switching dynamics in bulk ferroelectrics with isometric and oriented anisometric pores
12. Role of the pore interconnectivity on the dielectric, switching and tunability properties of PZTN ceramics10.1016/j.ceramint.2017.01.123 ↗
13. Understanding the effect of porosity on the polarisation-field response of ferroelectric materials10.1016/j.actamat.2018.05.007 ↗
14. Effect of porosity on the ferroelectric and piezoelectric properties of (Ba0.85Ca0.15)(Zr0.1Ti0.9)O3 piezoelectric ceramics10.1016/j.scriptamat.2017.10.022 ↗
15. Effect of two-step sintering on micro-honeycomb BaTiO3 ceramics prepared by freeze-casting process10.1016/j.jeurceramsoc.2016.03.032 ↗
16. §11.2.2 porous ceramic materials
17. Producing ceramic foams with hollow spheres10.1111/j.1151-2916.2004.tb19965.x ↗
18. Green and facile fabrication of hollow porous MnO/C microspheres from microalgaes for lithium-ion batteries10.1021/nn4023894 ↗
19. Conversion of pollen particles into three-dimensional ceramic replicas tailored for multimodal adhesion10.1021/cm402226w ↗
20. Biotemplated fabrication of hierarchically porous NiO/C composite from lotus pollen grains for lithium-ion batteries10.1039/c2jm16935e ↗
21. Tetragonal-orthorhombic phase transition in barium titanate via monoclinic MC type symmetry10.1080/00150193.2012.707894 ↗
22. Monoclinic MC phase in (001) field cooled BaTiO3 single crystals10.1063/1.3073716 ↗
23. Phase structure and nano-domain in high performance of BaTiO3 piezoelectric ceramics10.1016/j.jeurceramsoc.2011.11.014 ↗
24. Microstructure and dielectric properties of Ag-BaTiO3 composite ceramics10.1016/j.jeurceramsoc.2018.08.002 ↗
25. Positive temperature coefficient of resistivity for BaTiO3-based materials10.1016/0272-8842(91)90017-T ↗
26. Glass formation in multicomponent phosphate systems containing TiO210.1246/bcsj.47.2493 ↗
27. Phase formation in phosphorus doped BaTiO310.1016/S0167-577X(97)00226-7 ↗
28. Effect of phosphor doping on the microstructure and dielectric properties of barium titanate ceramice10.1016/S0254-0584(98)00120-5 ↗
29. Intermediate phase development in phosphorus-doped barium titanate10.1111/j.1151-2916.2000.tb01417.x ↗
30. Stanculescu · Ceram. Int. · 2016 · 42 · 52710.1016/j.ceramint.2015.08.141 ↗
31. Effects of Ba/Ti ratio on tetragonality, Curie temperature, and dielectric properties of solid-state-reacted BaTiO3 powder10.1557/jmr.2012.318 ↗
32. Direct and converse piezoelectric grain-size effects in BaTiO3 ceramics with different Ba/Ti ratios10.1016/j.jeurceramsoc.2018.05.011 ↗
33. Functional properties of BaTiO3–Ni0.5Zn0.5Fe2O4 magnetoelectric ceramics prepared from powders with core–shell structure10.1063/1.3340844 ↗
34. Oxygen deficiency and grain boundary-related giant relaxation in Ba(Zr,Ti)O3 ceramics10.1063/1.3664749 ↗
35. Relaxation motion and possible memory of domain structures in barium titanate ceramics studied by mechanical and dielectric losses10.1023/A:1024007407033 ↗
36. Ultrawide range dielectric spectroscopy of BaTiO3-based perovskite dielectrics”10.1063/1.2804570 ↗
37. Grain size-dependent properties of dense nanocrystalline barium titanate ceramics10.1111/j.1551-2916.2012.05409.x ↗
38. Diffuse dielectric anomaly in perovskite-type ferroelectric oxides in the temperature range of 400-700 degrees10.1063/1.1589595 ↗
39. Dielectric relaxation at high temperatures induced by oxygen vacancies at grain boundary in Na-doped barium strontium titanium ceramics10.1016/j.ssi.2014.11.001 ↗
40. Porous (Ba,Sr)TiO3 ceramics for tailoring dielectric and tunability properties: modelling and experiment10.2298/PAC1704235S ↗
41. Synthesis, spark plasma sintering and electrical conduction mechanism in BaTiO3–Cu composites10.1016/j.jeurceramsoc.2010.11.012 ↗
42. Oxygen-vacancy-related low-frequency dielectric relaxation and electrical conduction in Bi:SrTiO310.1103/PhysRevB.62.228 ↗
43. Characterisation of porous PZT ceramics by first-order reversal curves (FORC) diagrams10.1016/j.jeurceramsoc.2006.02.026 ↗
44. Nonlinear dielectric properties of paraelectric-dielectric composites described by a 3D finite element method based on Landau-Devonshire theory10.1016/j.actamat.2015.11.008 ↗
45. Analysis of switching properties of porous ferroelectric ceramics by means of first-order reversal curve diagrams10.1103/PhysRevB.74.174107 ↗