Magnetic, magnetostrictive, and AC impedance properties of manganese substituted cobalt ferrites

Abstract In this study, we investigated the effects of substituting Mn 3+ for some Fe 3+ in spinel lattice on the structure, magnetic properties, magnetostriction behavior, and AC impedance characteristics of cobalt ferrites. The manganese substituted cobalt ferrites (Co–Mn ferrites), CoMn x Fe 2− x O 4 , with x varied from 0 to 0.3 in 0.1 increments, were prepared by solid-state reaction. XRD examination confirmed that all sintered Co-based ferrites had a single-phase spinel structure. The average grain size, obtained from SEM micrographs, increased from 8.2 μm to 12.5 μm as the Mn content ( x ) increased from 0 to 0.3. Both the Curie temperature and coercivity of Co-based ferrites decreased with greater amounts of Mn, while the maximum magnetization (at H =6 kOe) of Mn-substituted cobalt ferrites was larger than that of the pure Co-ferrite. Magnetostrictive properties revealed that the pure Co-ferrite had the largest saturation magnetostriction ( λ S ), about −167 ppm, and the CoMn 0.2 Fe 1.8 O 4 sample exhibited the highest strain sensitivity (|d λ ⊥ /d H | m ) of 2.23×10 −9 A −1 m among all as-prepared Co-based ferrites. In addition, AC impedance spectra analysis revealed that the real part ( Z ′) of the complex impedance of Co–Mn ferrites was lower than that of pure Co-ferrite in the low frequency region, and the Co-based ferrites exhibited semiconductor-like behavior.