Investigation of layered perovskite NdBa0.5Sr0.25Ca0.25Co2O5+ as cathode for solid oxide fuel cells
Source abstract
Abstract
Abstract Layered perovskite oxides with and without Ca-doped NdBa0.5Sr0.25Ca0.25Co2O5+δ (NBSCaCO) and NdBa0.5Sr0.5Co2O5+δ (NBSCO) are studied to investigate the effects of Ca doping on the crystal structure, thermal behavior, electrical and electrochemical properties. Both NBSCO and NBSCaCO are tetragonal structure with P4/mmm space group. The average thermal expansion coefficient (TEC) value is reduced from 23.3 × 10−6 K−1 to 19.8 × 10−6 K−1 during 30–800 °C. The electrical conductivities are increased by Ca doping. Both electrical conductivities of NBSCO and NBSCaCO are higher than 600 S·cm−1 over 30–800 °C. Substitution of Sr with Ca can effectively improve the electrochemical properties of NBSCaCO. From 650 °C to 800 °C, the area specific resistance (ASR) of NBSCaCO are decreased from 0.62 to 0.062 Ω cm2 and the corresponding output power density are increased from 258 to 812 mW cm−2. On the basis of these results, Ca doped layered perovskite NBSCaCO can be a good cathode candidate material for SOFC application.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Thermal Expansion and Ionic Conductivity · Magnetic and transport properties of perovskites and related materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (45)
Show source-provided references
1. Advanced anodes for high-temperature fuel cells10.1038/nmat1040 ↗
2. Materials for fuel-cell technologies10.1038/35104620 ↗
3. A high-performance cathode for the next generation of solid-oxide fuel cells10.1038/nature02863 ↗
4. Intermediate temperature solid oxide fuel cells10.1039/b612060c ↗
5. Intermediate-temperature solid oxide fuel cells
6. A performance assessment study on solid oxide fuel cells for reduced operating temperatures10.1016/j.ijhydene.2014.11.115 ↗
7. Recent advances in materials for fuel cells10.1146/annurev.matsci.33.022802.094122 ↗
8. Cobalt based layered perovskites as cathode material for intermediate temperature solid oxide fuel cells: a brief review10.1016/j.jpowsour.2015.08.034 ↗
9. Layered LnBaCo2O5+δ perovskite cathodes for solid oxide fuel cells: an overview and perspective10.1039/C5TA06212H ↗
10. Stability, chemical compatibility and electrochemical performance of GdBaCo2O5+x layered perovskite as a cathode for intermediate temperature solid oxide fuel cells10.1016/j.ssi.2008.09.016 ↗
11. Achieving fast oxygen diffusion in perovskites by cation ordering10.1063/1.1864244 ↗
12. Evaluation of layered perovskites YBa1−xSrxCo2O5+δ as cathodes for intermediate-temperature solid oxide fuel cells10.1016/j.ijhydene.2014.01.008 ↗
13. Investigation of layered perovskite type NdBa1−xSrxCo2O5+δ ( x = 0, 0.25, 0.5, 0.75, and 1.0) cathodes for intermediate-temperature solid oxide fuel cells10.1016/j.electacta.2013.03.041 ↗
14. Characterization of GdBa1−xSrxCo2O5+δ ( 0 ≤ x ≤ 1.0) double perovskites as cathodes for solid oxide fuel cells10.1149/1.2965792 ↗
15. Optimization of Sr content in layered SmBa1–xSrxCo2O5+δ perovskite cathodes for intermediate-temperature solid oxidefuel cells10.1016/j.ijhydene.2012.09.048 ↗
16. Highly efficient and robust cathode materials for low-temperature solid oxide fuel cells: PrBa0.5Sr0.5Co2−xFexO5+δ10.1038/srep02426 ↗
17. Effect of Fe doping on layered GdBa0.5Sr0.5Co2O5+δ perovskite cathodes for intermediate temperature solid oxide fuel cells10.1111/jace.12692 ↗
18. Novel layered perovskite oxide PrBaCuCoO5+δ as a potential cathode for intermediate-temperature solid oxide fuel cells10.1016/j.jpowsour.2009.08.009 ↗
19. Tradeoff optimization of electrochemical performance and thermal expansion for Co-based cathode material for intermediate-temperature solid oxide fuel cells10.1016/j.electacta.2014.01.112 ↗
20. Synthesis and properties of SmBaCo2−xNixO5+δ perovskite oxide for IT-SOFC cathodes10.1016/j.ceramint.2015.09.062 ↗
21. Manganese-rich SmBaCo2−x−yMnxMgyO5+δ (x = 0.5, 1, 1.5 and y = 0.05, 0.1) with stable structure and low thermal expansion coefficient as cathode materials for IT-SOFCs10.1016/j.ceramint.2017.07.042 ↗
22. Effect of Mn on the electrochemical properties of a layered perovskite NdBa0.5Sr0.5Co2-xMnxO5+δ (x = 0, 0.25, and 0.5) for intermediate-temperature solid oxide fuel cells10.1016/j.electacta.2013.09.014 ↗
23. Cation size mismatch and charge interactions drive dopant segregation at the surfaces of manganite perovskites10.1021/ja3125349 ↗
24. Effects of Bi doping on the microstructure, electrical and electrochemical properties of La2-xBixCu0.5Mn1.5O6 (x = 0, 0.1 and 0.2) perovskites as novel cathodes for solid oxide fuel cells10.1016/j.electacta.2017.01.153 ↗
25. Electrical and electrochemical properties of SrBiMTiO6 (M = Fe, Mn, Cr) as potential cathodes for solid oxide fuel cells10.1007/s11581-015-1389-z ↗
26. Physicochemical and catalytic properties in methane combustion of La1−xCaxMnO3±y (0 ≤x ≤ 1; −0.04 ≤ y ≤ 0.24) perovskite-type oxide10.1016/j.apcata.2004.12.009 ↗
27. Oxygen exchange kinetics of epitaxial PrBaCo2O5+δ thin films
28. Oxygen nonstoichiometry, thermal expansion and high-temperature electrical properties of layered NdBaCo2O5+δ and SmBaCo2O5+δ10.1016/j.materresbull.2010.05.004 ↗
29. Rapid oxygen ion diffusion and surface exchange kinetics in PrBaCo2O5+x with a perovskite related structure and ordered A cations10.1039/b618345j ↗
30. Sintering and thermal expansion characterization of Al-doped and Co-doped lanthanum strontium chromites synthesized by the Pechini method10.1016/S0167-2738(01)01020-7 ↗
31. Strontium doping effect on high-performance PrBa1-xSrxCo2O5+δ as a cathode material for IT-SOFCs10.1149/2.007205eel ↗
32. Ab initio study of the electronic structures in LaCoO3-SrCoO3 systems10.1103/PhysRevB.57.15211 ↗
33. Oxygen permeation, thermal expansion behavior and electrochemical properties of LaBa0.5Sr0.5Co2O5+δ cathode for SOFCs10.1039/C7RA00125H ↗
34. Oxygen transport in selected nonstoichiometric perovskite-structure oxides10.1016/0167-2738(92)90435-R ↗
35. Survey of materials selection for ceramic fuel cells II. cathodes and anodes10.1016/0167-2738(96)00291-3 ↗
36. Thermal and electrochemical properties of PrBa0.5Sr0.5Co2−xFexO5+δ (x = 0.5, 1.0, 1.5) cathode materials for solid-oxide fuel cells10.1016/j.jpowsour.2013.01.064 ↗
37. Novel BaCo0.7Fe0.3-yNbyO3-δ(y = 0-0.12) as a cathode for intermediate temperature solid oxide fuel cell10.1016/j.elecom.2009.02.034 ↗
38. Internal shorting and fuel loss of a low temperature solid oxide fuel cell with SDC electrolyte10.1016/j.jpowsour.2006.10.087 ↗
39. Calculation of the e.m.f. of solid oxide fuel cells10.1023/A:1004138703860 ↗
40. On the link between bulk structure and surface activity of double perovskite based SOFC cathodes10.1016/j.ssi.2014.03.015 ↗
41. Electrochemically driven deactivation and recovery in PrBaCo2O5+δ oxygen electrodes for reversible solid oxide fuel cells10.1002/cssc.201600658 ↗
42. Performance degradation of double-perovskite PrBaCo2O5+δ oxygen electrode in CO2 containing atmospheres10.1016/j.apsusc.2017.03.298 ↗
43. Surface chemistry evolution in LnBaCo2O5+δ double perovskites for oxygen electrodes10.1016/j.ijhydene.2014.06.102 ↗
44. Thermal and electrochemical properties of layered perovskite PrBaCo2−xMnxO5+δ ( x =0.1, 0.2 and 0.3) cathode materials for intermediate temperature solid oxide fuel cells10.1016/j.ijhydene.2015.07.136 ↗
45. A-site calcium-doped Pr1-xCaxBaCo2O5+δ double perovskites as cathodes for intermediate-temperature solid oxide fuel cells10.1016/j.jpowsour.2016.02.071 ↗