Hydrothermal synthesis, sintering and characterization of nano La-manganite perovskite doped with Ca or Sr
Source abstract
Abstract
Abstract Two lanthanum manganite perovskite-nanostructures, namely; LaxCa(1-x)MnO3 and LaxSr(1-x)MnO3 (x = 0.1, 0.3, 0.5 and 1.0), were synthesized by hydrothermal method. To follow up the composition of formed phases, the synthesized powders were calcined at different temperatures. The obtained materials were investigated by X-ray diffraction (XRD) and transmission electron microscope (TEM). Moreover, the calcined powders were pressed at 100 MPa and sintered at variable temperatures; i.e. 1250, 1300, 1350 and 1450 °C. The phase composition and microstructural characteristics of sintered pervoskites were examined by XRD and scanning electron microscope (SEM). Furthermore, physical (bulk density and apparent porosity), electrical resistivity and magnetic properties were also determined. The results revealed that LaxCa(1-x)MnO3 and LaxSr(1-x)MnO3 nanostructures were successfully prepared by hydrothermal method. The physical properties of sintered pervoskites were strongly depended on dopant type and concentration. The maximum sintering temperature for LaxCa(1-x)MnO3 was 1400 °C while for LaxSr(1-x)MnO3 was 1450 °C, after which the materials have been fused. Materials doped with Ca or Sr exhibited lower resistivity. On the other side, the magnetic properties have been also improved after addition of Ca or Sr. This has been discussed based on the double exchange mechanism. LaxSr1-xMnO3 exhibited better magnetic properties than LaxCa1-xMnO3 and LaMnO3. La0.5Ca0.5MnO3 and La0.5Sr0.5MnO3 exhibited the highest magnetization among the other pervoskites.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Magnetic and transport properties of perovskites and related materials · Multiferroics and related materials · Advanced Condensed Matter Physics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (50)
Show source-provided references
1. La1−XSrXMnO3 (x=0, 0.3, 0.5, 0.7) nanoparticles nearly free standing in water: preparation and magnetic properties10.1021/cm0622349 ↗
2. Critical behavior in Ti-doped manganites LaMn1-xTixO3 (0.05<x<0.2)”10.1063/1.2795796 ↗
3. Critical behavior and magneto caloric effect of nano-crystalline La0.67Ca0.33Mn1-xFexO3 (x¼0.05, 0.2) synthesized by nebulized spray pyrolysis10.1016/j.matchemphys.2012.06.029 ↗
4. Large magnetocaloric effect in La2/3Ca1/3Mn1_xSixO3 (x = 0.05–0.20) manganites10.1088/0022-3727/41/17/175002 ↗
5. Synthesis and magneto-caloric effect of (La0.47Gd0.2)Sr0.33MnO3 polycrystalline nano-particles10.1016/j.mseb.2004.10.001 ↗
6. Structural distortion effect on the magnetization and magneto caloric effect in Pr modified La0.65Sr0.35MnO3 manganite10.1016/j.jallcom.2014.08.105 ↗
7. Grain size induced metal-insulator transition in La0.7Sr0.3MnO3 compounds
8. Effect of iron substitution on the structural, Magnetic and magneto caloric properties of Pr0.6Ca0.1Sr0.3Mn1_xFexO3 (0<x<0.075) manganites10.1016/j.jallcom.2014.04.125 ↗
9. Hydrothermal synthesis and characterization of perovskite oxide AgTaO3
10. Reverse precipitation synthesis of ≤10 nm magnetite nanoparticles and their application for removal of heavy metals from water10.1007/s12633-018-9841-0 ↗
11. Sinterability, physico-mechanical, electrical and magnetic properties of CoxMg1-xAl2O4 synthesized by microwave combustion method10.1016/j.ceramint.2018.08.214 ↗
12. Mechanical alloying and sintering of Ni/10wt%Al2O3 nanocomposites and its characterization10.1007/s12633-017-9611-4 ↗
13. Mechanical alloying, sintering and characterization of Al2O3-20wt.-%Cu nanocomposites10.1016/j.ceramint.2013.05.099 ↗
14. Effect of CTAB as a foaming agent on the properties of alumina ceramic membranes10.1016/j.ceramint.2013.10.106 ↗
15. Nano Mg1−xNixAl2O4 spinel pigments for advanced applications10.1016/j.saa.2014.01.115 ↗
16. Preparation by mechanical alloying, characterization and sintering of Cu–20 wt.-% Al2O3 nanocomposites10.1016/j.matdes.2012.10.032 ↗
17. Synthesis and characterization of SiC and SiC/Si3N4 composite nano powders from waste material10.1016/j.jhazmat.2012.05.048 ↗
18. Improvement of wetability, sinterability, mechanical and electrical properties of Al2O3-Ni nanocomposites prepared by mechanical alloying10.1016/j.ceramint.2016.11.194 ↗
19. Vogel · 1978
20. Spin-polarized inter grain tunneling in La2/3Sr1/3O310.1103/PhysRevLett.77.2041 ↗
21. Studies on La0.67Ca0.33MnO3SrTiO3 composites using two-phase model10.1016/j.jallcom.2011.02.122 ↗
22. Oxygen content and structures of La1−xCaxMnO3+d as a function of synthesis conditions10.1006/jssc.1999.8389 ↗
23. Orbital order-disorder transition in single-valent manganites10.1103/PhysRevB.68.144406 ↗
24. Hydrothermal synthesis and their catalytic properties of manganite nanowires10.1016/j.solidstatesciences.2009.06.013 ↗
25. Critical behavior and the universal curve for magneto-caloric effect in Pr0.6Ca0.1Sr0.3Mn1-xFexO3 (x= 0, 0.05 and 0.075) manganites10.1016/j.jallcom.2015.02.011 ↗
26. Hydrothermal synthesis of single-crystalline La0.5Ca0.5MnO3 nanowires at low temperature10.1039/b405288a ↗
27. Comparative study of the magnetic and electrical properties of Pr1-xBaxMnO3-d manganites depending on the preparation conditions10.1016/S0304-8853(01)00477-2 ↗
28. Studies on strontium substituted rare earth manganites10.1016/S0167-2738(99)00021-1 ↗
29. Nanocrystalline LaMnO3 preparation and kinetics of crystallization process10.1016/j.apt.2012.04.004 ↗
30. Recycling of LCW produced form water plants for synthesizing of nano FeO(OH), Al(OH)3, and layered double hydroxide: effect of heat-treatment10.1016/j.ceramint.2018.03.025 ↗
31. Hydrothermal synthesis of La1−XSrXMnO3 dendrites10.1016/j.jcrysgro.2013.04.019 ↗
32. Development of low thermal expansion mono crystalline Sr-feldspar phase via Sr- cordierite ceramic/borosilicate glass composite10.1016/j.ceramint.2018.04.213 ↗
33. In-situ formation of Al2O3/Al core-shell from waste material: production of porous composite improved by graphene10.1016/j.ceramint.2018.03.101 ↗
34. Assessment of electric arc furnace dust: powder characterization and its sinterability as ceramic product10.1016/j.ceramint.2017.06.192 ↗
35. Preparation of porous forsterite ceramic using waste silica fumes by the starch consolidation method
36. Microstructure and mechanical characteristics of laser-alloyed alumina ceramics10.1016/S0921-5093(01)01728-2 ↗
37. Sintering and mechanical characteristics of lanthanum strontium manganite10.1016/S0167-2738(01)01027-X ↗
38. Effect of surfactant types and their concentration on the structural characteristics of nanoclay10.1016/j.saa.2013.11.076 ↗
39. Sintering and technological properties of alumina/zirconia/nano TiO2 ceramic composites10.1016/j.materresbull.2012.12.024 ↗
40. In-situ formation of sintered cordierite-mullite nano-micro composites by utilizing of waste silica fume10.1016/j.materresbull.2012.04.036 ↗
41. Sinterability, microstructure and mechanical properties of gelcasted alumina ceramic
42. Densification, phase composition and properties of borosilicate glass composites containing nano-alumina and titania
43. In situ formation of zirconia-spinel-mullite ceramic composites10.1016/j.ceramint.2006.11.002 ↗
44. Densification and properties of glass/cordierite composites10.1016/j.ceramint.2004.06.003 ↗
45. Microscopical and physical characterization of microwave and microwave-hydrothermal synthesis products10.1016/j.micron.2012.06.005 ↗
46. Synthesis, structural and transport properties of nanocrystalline La1-xBaxMnO3 (0.0<x<0.3) powders10.1016/j.ssc.2005.07.017 ↗
47. A low temperature route to prepare LaMnO310.1016/j.matlet.2005.11.002 ↗
48. Thermopower studies of rare earth doped lanthanum barium manganites10.1016/j.jmmm.2014.03.015 ↗
49. Magnetocaloric effect in nano- and polycrystalline manganites La0.5Ca0.5MnO310.1016/j.jallcom.2010.07.165 ↗
50. Colossal-magneto resistance materials: manganites and conventional ferromagnetic semiconductors10.1016/S0370-1573(00)00111-3 ↗