Effect of Zr4+ content on the TC range and dielectric and ferroelectric properties of BaZrxTi1−xO3 ceramics prepared by microwave sintering
Source abstract
Abstract
Abstract Single phase and dense BaZrxTi1−xO3 (BZT) ceramics (x=0.05, 0.1, 0.15, 0.2, 0.25) were obtained by microwave sintering and the powders of these ceramics were synthesized by conventional hydrothermal method. The microstructural, dielectric and ferroelectric properties of BaZrxTi1−xO3 ceramics sintered at 1300oC were investigated. The XRD analysis revealed that the synthesized compound was formed with no second phase. As x was increased from 0.05 to 0.25, the average grain size was observed on the SEM micrographs to decrease from ~6 μm to ~3 μm. The dielectric constant as a function of temperature showed a decrease in Curie temperature (TC) with an increasing x, while the maximum value of dielectric loss occurred (tan δ) at x=0.1. A ferroelectric-relaxor crossover was observed to take place with increasing x by using the modified Curie–Weiss law. The remnant polarization (Pr) decreased from 9.45 to 4.4 C/cm2 with an increasing x, while the maximum value of Pr=11.84 also occurred at x=0.1. The breadth of TC range increased rapidly when x
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Ferroelectric and Piezoelectric Materials · Microwave Dielectric Ceramics Synthesis · Dielectric properties of ceramics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (18)
Show source-provided references
1. Diffuse ferroelectric phase transitions in Ba(Ti1−y,Zry)O3 ceramics10.1111/j.1151-2916.1982.tb10778.x ↗
2. The Curie point temperature of Ba(Ti1−xZrx)O3 ceramics10.1007/BF01106823 ↗
3. dc Electrical degradation of perovskite-type titanates: I, ceramics10.1111/j.1151-2916.1990.tb09809.x ↗
4. Dielectric properties of Ba(Zr,Ti)O3-based ferroelectrics for capacitor applications10.1111/j.1151-2916.2001.tb00738.x ↗
5. dc Electrical degradation of perovskite-type titanates: II, single crystals
6. Direct examinations of PTC action of single grain boundaries in semiconducting BaTiO3 ceramics10.1111/j.1151-2916.1980.tb10199.x ↗
7. dc Electrical degradation of perovskite-type titanates: III, a model of the mechanism10.1111/j.1151-2916.1990.tb09811.x ↗
8. Relaxor properties of Ba0.9Bi0.067(Ti1−xZrx)O3 ceramics10.1016/j.solidstatesciences.2005.04.009 ↗
9. Dielectric properties of Ba1−xSrxTiO3ceramics prepared by microwave sintering10.1016/j.ceramint.2012.10.089 ↗
10. Microwave processing of electroceramic materials and devices10.1007/s10832-008-9441-2 ↗
11. Microwave synthesis and sintering of Ba0.95Sr0.05TiO310.1016/S0167-577X(02)00648-1 ↗
12. Size-controlled synthesis of BaTiO3 nanocrystals via a hydrothermal route10.1016/j.matlet.2008.04.022 ↗
13. Preparation and characterisation of the Ba(Zr,Ti)O3 ceramics with relaxor properties10.1016/j.jeurceramsoc.2007.02.095 ↗
14. Preparation and dielectric properties of BaZr0.1Ti0.9O3 ceramics with different grain sizes10.1080/01411590600892120 ↗
15. Dielectric properties of ZrO2 doped (Ba, Sr, Ca)TiO3 ceramics for tunable microwave device applications10.1016/S0167-577X(02)01043-1 ↗
16. Influence of Ca substitution on microstructure and electrical properties of Ba(Zr,Ti)O3 ceramics10.1016/j.ceramint.2012.10.031 ↗
17. Dielectric and piezoelectric properties of characteristics of (Ba0.95Ca0.05)(Ti0.88Zr0.12)O3ceramics sintered in a protective atmosphere10.1016/j.jeurceramsoc.2009.06.034 ↗
18. Effect of La-doping on the properties of CaCu3Ti4O12 dielectric ceramics10.1016/j.ceramint.2007.10.007 ↗