Recovery of rutile from Ti-Bearing blast furnace slag through phase transformation and super-gravity separation for dielectric material
Source abstract
Abstract
Abstract High-purity rutile (TiO2) possessing favorable dielectric properties was sustainably recovered from Ti-bearing blast furnace slag through phase transformation and super-gravity separation in this study. Firstly, the phase transformation behavior of Ti was studied, the favorable conditions for transformation from perovskite to rutile were determined, and the Ti elements were efficiently enriched into rutile in the Ti-bearing blast furnace slag. Subsequently, the condition for solid and liquid phases of rutile and slag in coexistence was acquired by high-temperature CSLM, the rutile was effectively recovered from the Ti-bearing blast furnace slag through super-gravity separation, and its high purity was verified by the results of XRD, SEM-EDS, XRF, EPMA and Raman. Moreover, the rutile ceramic was prepared, and its dielectric properties were investigated, the dielectric constant was up to around 200, and the dielectric loss was as low as 0.0047 at about 900 Hz. The excellent frequency stability, high dielectric constant and low dielectric loss of the rutile recovered from Ti-bearing blast furnace slag reflect its favorable energy storage capability for dielectric material.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Dielectric properties of ceramics · Ferroelectric and Piezoelectric Materials · Microwave Dielectric Ceramics Synthesis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. Environmental impacts analysis of titanium sponge production using Kroll process in China10.1016/j.jclepro.2017.09.240 ↗
2. A method for recovery of iron, titanium, and vanadium from vanadium-bearing titanomagnetite10.1007/s12613-018-1556-0 ↗
3. Conversion of CaTi1−xMnxO3−δ-based photocatalyst for photocatalytic reduction of NO via structure-reforming of Ti-bearing blast furnace slag10.1021/acssuschemeng.9b00097 ↗
4. Dynamic oxidation of the Ti-bearing blast furnace slag10.2355/isijinternational.46.458 ↗
5. Study on recovery of metallic Fe and enrichment behaviour of titanium in Ti bearing blast furnace slag10.1179/174328108X393867 ↗
6. Study on leaching Ti from Ti bearing blast furnace slag by sulphuric acid10.1179/037195509X12585446038807 ↗
7. Leaching behavior of air cooled Ti-bearing blast-furnace slag in hydrochloric acid
8. Calcination intensity on rutile white pigment production via short sulfate process10.1016/j.dyepig.2016.05.034 ↗
9. Synthesis of nanomaterials from various wastes and their new age applications10.1016/j.jclepro.2018.06.262 ↗
10. Synergistic cooperation of rutile TiO2 {002}, {101}, and {110} facets for hydrogen sensing10.1021/acsami.8b07816 ↗
11. Dielectric relaxations in rutile TiO210.1111/jace.13250 ↗
12. Colossal permittivity and dielectric relaxations in Tl+Nb co-doped TiO2 ceramics10.1016/j.ceramint.2018.03.255 ↗
13. Low temperature sintering and microwave dielectric properties of TiO2 ceramics10.1016/j.jeurceramsoc.2017.06.039 ↗
14. Effect of porosity and microstructure on the microwave dielectric properties of rutile10.1016/j.matlet.2017.04.113 ↗
15. Effects of manganese doping on the dielectric properties of titanium dioxide ceramics10.1111/j.1551-2916.2010.04039.x ↗
16. Phase equilibria of CaO-SiO2-5wt.%MgO-30wt.%Al2O3-TiO2 system at 1400 °C and 1450 °C relevant to high Al2O3 Ti-bearing blast furnace slag system10.1016/j.jallcom.2017.06.058 ↗
17. The effect of P2O5 on the crystallization behaviors of Ti-bearing blast furnace slags using single hot thermocouple technique10.1007/s11663-014-0077-0 ↗
18. Slag influence of B2O3 on viscosity of high Ti-bearing blast furnace slag10.2355/isijinternational.52.984 ↗
19. Investigation on phase transformation of titania slag using microwave irradiation10.1016/j.jallcom.2013.07.112 ↗
20. Integrated XRD, EPMA and XRF study of ilmenite and titania slag used in pigment production10.1016/j.jallcom.2008.06.121 ↗
21. Preparation of nanosized synthetic rutile from ilmenite concentrate10.1016/j.mineng.2010.01.007 ↗
22. A conceptual demonstration and theoretical design of a novel “super-gravity” vacuum flash process for seawater desalination10.1016/j.desal.2015.06.004 ↗
23. Renormalizability properties of supergravity10.1103/PhysRevLett.38.527 ↗
24. Effect of elution modes on protein separation by cross-Axis coil planet centrifuge with two different types of coiled columns10.1080/10826069908544886 ↗
25. Water electrolysis enhanced by super gravity field for hydrogen production10.1016/j.ijhydene.2010.01.128 ↗
26. Manufacturing 3-D open-cell aluminum foam via infiltration casting in a super-gravity field10.1016/j.jmatprotec.2017.10.032 ↗
27. Separation of fine Al2O3 inclusion from liquid steel with super gravity10.1007/s11663-016-0905-5 ↗
28. A green method of respectively recovering rare earths (Ce, La, Pr, Nd) from rare-earth tailings under super-gravity10.1016/j.jhazmat.2018.12.118 ↗
29. Dielectric relaxations in rutile TiO210.1111/jace.13250 ↗
30. Viscosity of CaO-MgO-Al2O3-SiO2-TiO2 melts containing TiC particles10.1007/s11663-014-0169-x ↗
31. Hydrothermal preparation of uniform nanosize rutile and anatase particles10.1021/cm00052a010 ↗
32. Size-dependent modifications of the first-order Raman spectra of nanostructured rutile TiO210.1103/PhysRevB.77.195414 ↗
33. The dielectric properties for (Nb, In, B) co-doped rutile TiO2 ceramics10.1016/j.ceramint.2017.02.051 ↗