Influence of quenching temperature on piezoelectric and ferroelectrics properties in BaTiO3-Bi(Mg1/2Ti1/2)O3-BiFeO3 ceramics
Source abstract
Abstract
Abstract 0.3BaTiO3-0.1Bi(Mg1/2Ti1/2)O3-0.6BiFeO3 ceramics were fabricated by conventional solid-state reaction. Piezoelectric and ferroelectric properties were measured for as-sintered ceramic and ceramics quenched from temperatures of 600, 700, and 800 °C. The crystal system of the ceramics was pseudo-cubic in the as-sintered state and all the quenched states. Pinched P-E hysteresis loops were observed in the as-sintered sample. Ferroelectric P-E hysteresis loops and S-E curves were observed for the samples quenched from 700 and 800 °C. The electrical properties were enhanced with increasing quenching temperature, which could be attributed to an improved homogeneity of defect dipoles.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Ferroelectric and Piezoelectric Materials · Multiferroics and related materials · Dielectric materials and actuators
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (21)
Show source-provided references
1. Jaffe · 1971
2. Large piezoelectric effect in Pb-free ceramics10.1103/PhysRevLett.103.257602 ↗
3. Lead-free piezoceramics10.1038/nature03028 ↗
4. A correlation between piezoelectric response and crystallographic structural parameter observed in lead-free (1-x)(Bi0.5Na0.5)TiO3-xSrTiO3 piezoelectrics10.1016/j.jeurceramsoc.2016.11.023 ↗
5. Origin of the large strain response in (K0.5Na0.5)NbO3 modified (Bi0.5Na0.5)TiO3–BaTiO3 lead-free piezoceramics10.1063/1.3121203 ↗
6. Fabrication of lead-free piezoelectric (Bi0.5Na0.5)TiO3-BaTiO3 ceramics using electrophoretic deposition10.1007/s10853-017-1717-y ↗
7. Properties of hot-pressed ferroelectric alkali niobate ceramics10.1111/j.1151-2916.1967.tb15121.x ↗
8. Ferroelectric and piezoelectric properties of (1-x)(Bi0.5Na0.5)TiO3-xBaTiO3 ceramics10.1007/s10854-012-0764-z ↗
9. Quenching effects on piezoelectric properties and depolarization temperatures of (Bi0.5Na0.5)TiO3-based solid solution systems10.7567/JJAP.56.10PD05 ↗
10. Structural and electrical characteristics of potential candidate lead-free BiFeO3-BaTiO3 piezoelectric ceramics10.1063/1.4999375 ↗
11. Structural, dielectric, and piezoelectric properties of Mn-doped BaTiO3-Bi(Mg1/2Ti1/2)O3-BiFeO3 Ceramics10.7567/JJAP.50.09ND07 ↗
12. Low leakage current and enhanced ferroelectric properties of Ti and Zn codoped BiFeO3 thin film10.1063/1.2918130 ↗
13. Aging behavior in single-domain Mn-doped BaTiO3 crystals: implication for a unified microscopic explanation of ferroelectric aging10.1103/PhysRevB.73.094121 ↗
14. Strong ferroelectric domain-wall pinning in BiFeO3 ceramics10.1063/1.3490249 ↗
15. Revealing the role of heat treatment in enhancement of electrical properties of lead-free piezoelectric ceramics10.1063/1.4991492 ↗
16. Electric field induced lattice strain in pseudocubic Bi(Mg1/2Ti1/2)O3-modified BaTiO3-BiFeO3 piezoelectric ceramics10.1063/1.4948264 ↗
17. In-situ electric field induced lattice strain response observation in BiFeO3-BaTiO3 lead-free piezoelectric ceramics10.2109/jcersj2.17259 ↗
18. Ferroelectric and piezoelectric properties of BiFeO3-BaTiO3 solid solution ceramics10.1080/00150193.2013.839294 ↗
19. Loss mechanisms and domain stabilisation in doped BaTiO310.1088/0022-3719/11/15/031 ↗
20. Electrical after-effects in Pb(Ti,Zr)O3 ceramics10.1080/00150197808236770 ↗
21. Effect of thermal annealing on crystal structures and electrical properties in BaTiO3 ceramics10.1063/1.5023814 ↗