journal article·2011-09

Sb doping effects on the piezoelectric and ferroelectric characteristics of lead-free Na0.5K0.5Nb1−x SbxO3 piezoelectric ceramics

I-Hao Chan, Chieh-Tze Sun, Mau-Phon Houng, Sheng-Yuan Chu

Ceramics International· Volume 37· Issue 7
Publisher page

Abstract

Abstract The piezoelectric, phase structure and ferroelectric properties of lead-free Na 0.5 K 0.5 Nb 1− x Sb x O 3 piezoelectric ceramics were systematically investigated. (Na 0.5 K 0.5 )Nb 1− x Sb x O 3 ceramics were synthesized using the conventional solid-state reaction method. The effect of B-site Sb 5+ substitution for Nb 5+ on the structural characteristics and piezoelectric properties of samples was determined. According to XRD patterns, the phase gradually changes from tetragonal to orthorhombic with increasing Sb content. At x = 0.03, the tetragonal and orthorhombic phases coexist and relatively high piezoelectric properties were obtained. The relatively high Q m value obtained after substitution with Sb 5+ ions might be due to the increased electronegativity and decreased ionic radius at the morphotropic phase boundary (MPB) at x = 0.03. However, the Q m value decreases with further Sb addition. Relatively high piezoelectric properties at x = 0.03 of k p = 0.42, k t = 0.48, ɛ r = 446, Q m = 143, tan δ = 2.3%, and density = 4.31 g/cm 3 , d 33 = 123 pC/N, were obtained.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Ferroelectric and Piezoelectric Materials · Acoustic Wave Resonator Technologies · Microwave Dielectric Ceramics Synthesis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (40)

Show source-provided references
1. Doping effects on the piezoelectric properties of low-temperature sintered PbTiO3-based ceramics for SAW applications
2. The investigation of preferred orientation growth of ZnO films on the PbTiO3-based ceramics and its application for SAW devices10.1016/S0022-0248(03)01452-0 ↗
3. Effects of poling field on the piezoelectric and dielectric properties of Nb additive PZT-based ceramics and their applications on SAW devices10.1016/j.matlet.2003.07.004 ↗
4. 25MHz ultrasonic transducers with lead-free piezoceramic, 1-3 PZT fiber-epoxy composite, and PVDF polymer active elements10.1109/TUFFC.2009.1046 ↗
5. Design and implementation of a piezoelectric clutch mechanism using piezoelectric buzzers10.1016/j.sna.2007.10.018 ↗
6. Fabrication and electrical characteristics of piezoelectric PMN-PZN-PZT ceramic transformers10.1016/j.mseb.2007.01.031 ↗
7. Effect of ZnO and CuO on the sintering temperature and piezoelectric properties of a hard piezoelectric ceramic10.1111/j.1551-2916.2005.00823.x ↗
8. New series of bismuth layer-structured ferroelectrics10.1143/JJAP.34.5384 ↗
9. Piezoelectric properties of SrBi4Ti4O15-based ceramics10.1143/JJAP.38.5561 ↗
10. Lead-free piezoceramics10.1038/nature03028 ↗
11. Influence of alkaline and niobium excess on sintering and microstructure of sodium–potassium niobate (K0.5 Na0.5)NbO310.1111/j.1551-2916.2010.03578.x ↗
12. Enhanced dielectric properties in modified barium titanate ceramics through improved processing10.1016/j.jallcom.2008.03.018 ↗
13. A generalized rule for large piezoelectric response in perovskite oxide ceramics and its application for design of lead-free compositions10.1063/1.3142442 ↗
14. Properties of (Na, K)NbO3 and (Li, Na, K)NbO3 ceramic mixed systems10.1080/00150190390200767 ↗
15. Effects of Na/K ratio on the phase structure and electrical properties of NaxK1−xNbO3 lead-free piezoelectric ceramics10.1007/s12598-010-0038-y ↗
16. K/Na ratio dependence of the electrical properties of [(KxNa1−x)0.95Li0.05](Nb0.95Ta0.05)O3 lead-free ceramics10.1111/j.1551-2916.2008.02415.x ↗
17. Processing and piezoelectric properties of lead-free (K,Na) (Nb,Ta) O3 ceramics10.1111/j.1551-2916.2005.00229.x ↗
18. Effect of sintering temperature on the piezoelectric and ferroelectric characteristics of CuO doped 0.95(Na0.5K0.5)NbO3–0.05LiTaO3 ceramics10.1016/j.jallcom.2009.07.174 ↗
19. Electrical and mechanical properties of fine-grained Li/Ta-modified (Na,K)NbO3-based piezoceramics prepared by spark plasma sintering10.1111/j.1551-2916.2009.03542.x ↗
20. Low-temperature sintering and piezoelectric properties of (Na0.5K0.5)NbO3 lead-free piezoelectric ceramics10.1111/j.1551-2916.2009.03359.x ↗
21. Perovskite (Na0.5K0.5)1−x(LiSb)xNb1−xO3 lead-free piezoceramics10.1063/1.2206554 ↗
22. Enhanced ferroelectric properties of potassium sodium niobate ceramics modified by small amount of K3Li2Nb5O1510.1111/j.1551-2916.2008.02921.x ↗
23. Structure, dielectric, and piezoelectric properties of CuO-doped K0.5Na0.5NbO3 -BaTi O3 lead-free ceramics10.1063/1.2787164 ↗
24. Properties of (Na0.5K0.5)NbO3–SrTiO3 based lead-free ceramics and surface acoustic wave devices10.1016/j.sna.2006.11.002 ↗
25. An investigation of (Na0.5K0.5)NbO3–CaTiO3 based lead-free ceramics and surface acoustic wave devices10.1016/j.jeurceramsoc.2007.02.218 ↗
26. Phase transition behavior and electrical properties of [(K0.50Na0.50)1−xAgx](Nb1−xTax)O3 lead-free ceramics10.1016/j.jallcom.2009.09.047 ↗
27. Dielectric and piezoelectric properties of Fe2O3-doped (Na0.5K0.5)0.96Li0.04Nb0.86Ta0.1Sb0.04O3 lead-free ceramics10.1016/j.jpcs.2008.01.003 ↗
28. Effects of Sb content on electrical properties of lead-free piezoelectric [(Na0.535K0.480)0.942Li0.058](Nb1−xSbx)O3 ceramics10.1016/j.jallcom.2009.09.172 ↗
29. Phase transitions and electrical properties of (Na1−xKx)(Nb1−ySby)O3 lead-free piezoelectric ceramics with a MnO2 sintering aid10.1111/j.1551-2916.2007.01627.x ↗
30. Synthesis and characterization of Sb-substituted (K0.5Na0.5)NbO3 piezoelectric ceramics10.1080/10584580802558043 ↗
31. CaTiO3-modified (K0.50Na0.50)(Nb0.96Sb0.04)O3 lead-free piezoelectric ceramics10.1111/j.1551-2916.2008.02542.x ↗
32. Microstructure and piezoelectric properties of the CuO-added (Na0.5K0.5) (Nb0.97Sb0.03)O3 lead-free piezoelectric ceramics10.1063/1.2965197 ↗
33. Effects of Sb-doping on the formation of (K, Na)(Nb, Sb)O3 solid solution under hydrothermal conditions10.1016/j.jallcom.2009.12.045 ↗
34. Antimony tuned rhombohedral–orthorhombic phase transition and enhanced piezoelectric properties in sodium potassium niobate
35. Effect of Li substitution on the piezoelectric properties of potassium sodium niobate ceramics10.1143/JJAP.44.6136 ↗
36. Low temperature sintering and properties of piezoelectric PZT-PFW-PMN ceramics with YMnO3 addition10.1016/j.materresbull.2007.02.020 ↗
37. Structure, piezoelectric and ferroelectric properties of Li- and Sb-modified K0.5Na0.5NbO3 lead-free ceramics10.1088/0022-3727/40/11/036 ↗
38. Raman scattering study of piezoelectric (Na0.5K0.5)NbO3–LiNbO3 ceramics10.1143/JJAP.44.7064 ↗
39. Simple ways of determining perovskite structures10.1107/S0567739475001635 ↗
40. Lattice parameters and tilted octahedra in sodium–potassium niobate solid solutions10.1107/S0567739476000983 ↗