journal article·2016-08

Enhanced thermoelectric properties of carbon fiber reinforced cement composites

Jian Wei, Qian Zhang, Lili Zhao, Lei Hao, Chunli Yang

Ceramics International· Volume 42· Issue 10
Publisher page

Abstract

Abstract Thermoelectric properties of carbon fiber reinforced cement composites (CFRCs) have attracted relevant interest in recent years, due to their fascinating ability for harvesting ambient energy in urban areas and roads, and to the widespread use of cement-based materials in modern society. The enhanced effect of the thin pyrolytic carbon layer (formed at the carbon fiber/cement interface) on transport and thermoelectric properties of CFRCs has been studied. It has been demonstrated that it can enhance the electrical conduction and Seebeck coefficient of CFRCs greatly, resulting in higher power factor 2.08 µW m −1 K −2 and higher thermoelectric figure of merit 3.11×10 −3 , compared to those reported in the literature and comparable to oxide thermoelectric materials. All CFRCs with pyrolytic carbon layer, exhibit typical semiconductor behavior with activation energy of electrical conduction of 0.228-0.407 eV together with a high Seebeck coefficient. The calculation through Mott’s formula indicates the charge carrier density of CFRCs (10 14 –10 16 cm −3 ) to be much smaller than that of typical thermoelectric materials and to increase with the carbon layer thickness. CFRCs thermal conductivity is dominated by phonon thermal conductivity, which is kept at a low level by high density of micro/nano-sized defects in the cement matrix that scatter phonons and shorten their mean free path. The appropriate carrier density and mobility induced by the amorphous structure of pyrolytic carbon is primarily responsible for the high thermoelectric figure of merit.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Smart Materials for Construction · Advanced Energy Technologies and Civil Engineering Innovations · Transition Metal Oxide Nanomaterials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (31)

Show source-provided references
1. Cement reinforced with short carbon fibers: a multifunctional material10.1016/S1359-8368(99)00071-2 ↗
2. Graphene oxide-deposited carbon fiber/cement composites for electromagnetic interference shielding application10.1016/j.conbuildmat.2015.03.050 ↗
3. A 3D percolation model for conductive fibrous composites: application in cement-based sensors10.1007/s10853-015-9129-3 ↗
4. Energy harvesting from solar irradiation in cities using the thermoelectric behavior of carbon fiber reinforced cement composites10.1039/C4RA07864K ↗
5. Applications of nanostructured carbon materials in constructions: the State of the Art10.1155/2015/807416 ↗
6. New and old concepts in thermoelectric materials10.1002/anie.200900598 ↗
7. Frank. Steglich, Large seebeck effect by charge-mobility engineering10.1038/ncomms8475 ↗
8. Thermal and electrical resistances of carbon nanotube-reinforced foamed concrete10.1166/nnl.2014.1724 ↗
9. Enhancing the seebeck effect in carbon fiber-reinforced cement by using intercalated carbon fibers10.1016/S0008-8846(00)00341-0 ↗
10. Preparation and thermoelectric properties of bismuth telluride-carbon fiber reinforced cement composites
11. Enhanced thermoelectric effect of carbon fiber reinforced cement composites by metallic oxide/cement interface10.1016/j.ceramint.2014.01.024 ↗
12. Brandt · 2012
13. Unprecedented vibration damping with high values of loss modulus and loss tangent, exhibited by cement-matrix graphite network composite10.1016/j.carbon.2009.12.040 ↗
14. Graphene oxide/ferrofluid/cement composites for electromagnetic interference shielding application10.1088/0957-4484/22/46/465701 ↗
15. Thermal conductivity of 2D C–C composites with pyrolytic and glass-like carbon matrices10.1016/j.jnucmat.2009.05.004 ↗
16. Niobium(V) oxide with added silver as a thermoelectric material prepared by spark plasma sintering10.1016/j.matlet.2015.04.148 ↗
17. Dopant selection for control of charge carrier density and mobility in amorphous indium oxide thin-film transistors: comparison between Si- and W-dopants10.1063/1.4907285 ↗
18. Estimation of the thermal band gap of a semiconductor from seebeck measurements10.1007/s11664-999-0211-y ↗
19. In-doped multifilled n-type skutterudites with ZT=1.810.1016/j.actamat.2015.05.024 ↗
20. Low temperature electrical and thermal transport properties of the Ca3−xSbxCo4O9 system10.1007/s10854-012-0792-8 ↗
21. Compositional dependence of the thermoelectric properties of (SrxBaxYb1−x)yCo4Sb1210.1088/0953-8984/23/27/275601 ↗
22. Enhancement of thermoelectric properties in Sn doped (In0.95Lu0.05)2O310.1016/j.jallcom.2015.04.057 ↗
23. Enhancement of thermoelectric performance in Cd-doped Ca3Co4O9 via spin entropy, defect chemistry and phonon scattering10.1039/C4TA03891F ↗
24. Temperature dependent thermopower and electrical conductivity of Te nanowire/poly(3,4-ethylenedioxythiophene):poly(4-styrene sulfonate) microribbons10.1063/1.4893740 ↗
25. Synthesis, structure, and properties of Ca3Co3.85M0.15O9+δ (M=Ti–Zn, Mo, W, Pb, Bi) layered thermoelectrics10.1134/S0020168515080105 ↗
26. Effects of substituting La3+,Y3+ and Ce4+ for Ca2+ on the high temperature transport and thermoelectric properties of CaMnO310.1088/0022-3727/42/5/055010 ↗
27. n-Type skutterudites (R,Ba,Yb)yCo4Sb12 (R=Sr, La, Mm, DD, SrMm, SrDD) approaching ZT≈2.010.1016/j.actamat.2013.09.039 ↗
28. Effects of ball milling on microstructures and thermoelectric properties of higher manganese silicides10.1016/j.jallcom.2015.04.048 ↗
29. Recent progress in oxide thermoelectric materials: p-Type Ca3Co4O9 and n-Type SrTiO310.1021/ic800644x ↗
30. Enhanced thermoelectric figure-of-merit ZT for hole-doped Bi2Sr2Co2Oy through Pb substitution10.1063/1.4720075 ↗
31. Thermoelectric properties of electron doped SrO(SrTiO3)n(n=1, 2) ceramics10.1063/1.3117943 ↗