La0.5Sr0.5Fe0.9Mo0.1O3-δ-CeO2 anode catalyst for Co-Producing electricity and ethylene from ethane in proton-conducting solid oxide fuel cells
Source abstract
Abstract
Abstract A La0.5Sr0.5Fe0.9Mo0.1O3-δ-CeO2 (LSFM-CeO2) composite was prepared by impregnating CeO2 into porous La0.5Sr0.5Fe0.9Mo0.1O3-δ perovskite and was used as an anode material for proton-conducting solid oxide fuel cells (SOFCs). The maximum power densities of the BaZr0.1Ce0.7Y0.2O3-δ (BZCY) electrolyte-supported single cell with LSFM-CeO2 as the anode reached 291 mW cm−2 and 190 mW cm−2 in hydrogen and ethane fuel at 750 °C, respectively, which are significantly higher than those of a single cell with only LSFM as the anode. Additionally, the ethylene selectivity and ethylene yield from ethane for the fuel cell at 750 °C were as high as 93.4% and 37.1%, respectively. The single cell also showed negligible degradation in performance and no carbon deposition during continuous operation for 22 h under an ethane fuel atmosphere. The improved electrochemical performance due to the impregnation of CeO2 can be a result of enhanced electronic and ionic conductivity, abundant active sites, and a broad three-phase interface in the resultant composite anode. The LSFM-CeO2 composite is believed to be a promising anode material for proton-conducting SOFCs for co-producing electricity and high-value chemicals from hydrocarbon fuels.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Catalysis and Oxidation Reactions · Chemical Looping and Thermochemical Processes
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (50)
Show source-provided references
1. Olefins from conventional and heavy feedstocks: energy use in steam cracking and alternative processes10.1016/j.energy.2005.04.001 ↗
2. Co-generation of electricity and olefin via proton conducting fuel cells using (Pr0.3Sr0.7)0.9Ni0.1Ti0.9O3 catalyst layers10.1016/j.apcatb.2020.118973 ↗
3. Co2CrO4 nanopowders as an anode catalyst for simultaneous conversion of ethane to ethylene and power in proton-conducting fuel cell reactors10.1021/acs.jpcc.7b11680 ↗
4. Co-generation of electricity and chemicals from propane fuel in solid oxide fuel cells with anode containing nano-bimetallic catalyst10.1016/j.jpowsour.2014.04.009 ↗
5. Electrochemical performance of protonic ceramic fuel cells with stable BaZrO3-based electrolyte: a mini-review10.1016/j.elecom.2018.09.001 ↗
6. Highly-conductive proton-conducting electrolyte membranes with a low sintering temperature for solid oxide fuel cells10.1016/j.memsci.2018.04.037 ↗
7. Solid oxide fuel cells using Sm0.075Nd0.075Ce0.85O2−δ electrolyte coupled with an electron-blocking interlayer10.1016/j.ceramint.2020.01.035 ↗
8. Review of anodic reactions in hydrocarbon fueled solid oxide fuel cells and strategies to improve anode performance and stability10.1007/s40243-020-0166-8 ↗
9. Carbon-resistant Ni-Zr0.92Y0.08O2-δ supported solid oxide fuel cells using Ni-Cu-Fe alloy cermet as on-cell reforming catalyst and mixed methane-steam as fuel10.1016/j.jpowsour.2015.11.029 ↗
10. Anode-engineered protonic ceramic fuel cell with excellent performance and fuel compatibility10.1002/adma.201602103 ↗
11. Multiple-doped barium cerate proton-conducting electrolytes for chemical-energy cogeneration in solid oxide fuel cells10.1016/j.ijhydene.2018.08.204 ↗
12. Stable SrCo0.7Fe0.2Zr0.1O3-δ cathode material for proton conducting solid oxide fuel cell reactors10.1016/j.ijhydene.2018.02.192 ↗
13. Protonic membrane for fuel cell for co-generation of power and ethylene10.1016/j.jpowsour.2007.10.056 ↗
14. Interfacial enhancement by γ-Al2O3 of electrochemical oxidative dehydrogenation of ethane to ethylene in solid oxide electrolysis cells10.1002/anie.201908388 ↗
15. Cogeneration of ethylene and energy in protonic fuel cell with an efficient and stable anode anchored with in-situ exsolved functional metal nanoparticles10.1016/j.apcatb.2017.08.051 ↗
16. Prospect of hydrogen technology using proton-conducting ceramics10.1016/j.ssi.2003.03.001 ↗
17. Sintering aids for proton-conducting oxides – a double-edged sword? A mini review10.1016/j.elecom.2020.106672 ↗
18. Proton-conducting ceramic fuel cells: scale up and stack integration10.1016/j.jpowsour.2020.228868 ↗
19. Defects evolution of Ca doped La2NiO4+delta and its impact on cathode performance in proton-conducting solid oxide fuel cells10.1016/j.ijhydene.2020.04.150 ↗
20. Tri-Doped BaCeO3-BaZrO3 as a chemically stable electrolyte with high proton-conductivity for intermediate temperature solid oxide electrolysis cells (SOECs)10.1021/acsami.0c12532 ↗
21. A novel cobalt-free cathode with triple-conduction for proton-conducting solid oxide fuel cells with unprecedented performance10.1039/C9TA02449B ↗
22. A first-principles study on divergent reactions of using a Sr3Fe2O7 cathode in both oxygen ion conducting and proton conducting solid oxide fuel cells10.1039/C8RA04059A ↗
23. The role of oxygen vacancies of ABO3 perovskite oxides in the oxygen reduction reaction10.1039/D0EE00092B ↗
24. A highly active cathode material of Cu-doped Sr2Fe1.5Mo0.5O6 for symmetrical solid oxide fuel cells10.1007/s10854-020-04898-z ↗
25. Cobalt-free perovskite SrTa0.1Mo0.1Fe0.8O3-delta as cathode for intermediate-temperature solid oxide fuel cells10.1002/er.4950 ↗
26. Characterization of Sr2Fe1.5Mo0.5O6-δ-Gd0.1Ce0.9O1.95 symmetrical electrode for reversible solid oxide cells10.1016/j.ceramint.2019.02.179 ↗
27. In situ embedding of CoFe nanocatalysts into Sr3FeMoO7 matrix as high-performance anode materials for solid oxide fuel cells10.1016/j.jpowsour.2020.228071 ↗
28. Cobalt-free La0.5Sr0.5Fe0.9Mo0.1O3-delta electrode for symmetrical SOFC running on H2 and CO fuels10.1016/j.electacta.2019.134642 ↗
29. Effect of the type of ceria dopant on the performance of Ni/CeO2 SOFC anode for ethanol internal reforming10.1016/j.apcatb.2017.01.069 ↗
30. Bio-inspired surfactant assisted nano-catalyst impregnation of Solid-Oxide Fuel Cell (SOFC) electrodes10.1016/j.matlet.2015.10.159 ↗
31. On the limiting factor of impregnation methods for developing Cu/CeO2 anodes for solid oxide fuel cells10.1007/s10008-017-3876-9 ↗
32. Ceria catalysts at nanoscale: how do crystal shapes shape catalysis?10.1021/acscatal.7b01246 ↗
33. Long-term tests of Ni-Zr0.9Sc0.1O1.95 anode impregnated with CeO2 in H2 + H2O gas mixtures10.1016/j.ijhydene.2016.07.136 ↗
34. Dry reforming over CeO2-promoted Ni/MgO nano-catalyst: effect of Ni loading and CH4/CO2 molar ratio10.1016/j.jiec.2014.03.043 ↗
35. Dry reforming of methane over Pt-Ni/CeO2 catalysts: effect of the metal composition on the stability10.1016/j.cattod.2019.06.018 ↗
36. Electrochemical comparison of cobalt-free La0.5Sr0.5Fe0.9Mo0.1O3-δ based cathode materials for intermediate-temperature solid oxide fuel cells10.1016/j.ceramint.2013.10.133 ↗
37. Molybdenum modified CeAlOx catalyst for the selective catalytic reduction of NO with NH310.1016/j.molcata.2014.02.016 ↗
38. High performance ferrite-based anode La0.5Sr0.5Fe0.9Mo0.1O3-delta for intermediate-temperature solid oxide fuel cell10.1016/j.electacta.2017.09.157 ↗
39. High-performance anode material Sr2FeMo0.65Ni0.35O6-delta with in situ exsolved nanoparticle catalyst10.1021/acsnano.6b03979 ↗
40. Carbon-coated Cu-Co bimetallic nanoparticles as selective and recyclable catalysts for production of biofuel 2,5-dimethylfuran10.1016/j.apcatb.2016.07.004 ↗
41. Lanthanum manganite-based perovskite as a catalyst for co-production of ethylene and hydrogen by ethane dehydrogenation10.1016/j.jcat.2019.08.008 ↗
42. Cogeneration of ethylene and electricity in symmetrical protonic solid oxide fuel cells based on a La0.6Sr0.4Fe0.8Nb0.1Cu0.1O3-delta electrode10.1039/D0TA08974E ↗
43. Sr2Fe2-xMoxO6-delta perovskite as an anode in a solid oxide fuel cell: effect of the substitution ratio10.1016/j.cattod.2015.04.025 ↗
44. Exceptionally high performance anode material based on lattice structure decorated double perovskite Sr2FeMo2/3Mg1/3O6-delta for solid oxide fuel cells10.1002/aenm.201800062 ↗
45. La0.4Bi0.4Sr0.2FeO3-delta as cobalt-free cathode for intermediate-temperature solid oxide fuel cell10.1016/j.electacta.2016.01.164 ↗
46. A highly active, CO2-tolerant electrode for the oxygen reduction reaction10.1039/C8EE01140K ↗
47. Efficient bifunctional electrocatalysts for solid oxide cells based on the structural evolution of perovskites with abundant defects and exsolved CoFe nanoparticles10.1016/j.jpowsour.2020.228981 ↗
48. Reducible supports for Ni-based oxygen carriers in chemical looping combustion10.1021/ef400184b ↗
49. Catalytic dry reforming of methane over high surface area ceria10.1016/j.apcatb.2005.03.001 ↗
50. Methane dry reforming over ceria-zirconia supported Ni catalysts10.1016/j.cattod.2016.04.025 ↗