journal article·2020-10

Highly promoted performance of triple-conducting cathode for YSZ-based SOFC via fluorine anion doping

Wei Wang, Xiaozhen Zhang, Dandan Zhang, Qiannan Zeng, Yuhua Jiang, Bin Lin

Ceramics International· Volume 46· Issue 15
Publisher page

Abstract

Abstract One of the most important factors to commercialized yttria-stabilized zirconia (YSZ)-based solid oxide fuel cell (SOFC) is a highly active mixed-conducting cathode at reduced temperatures. Herein, we propose a new strategy of fluorine anion (F−) doping to enhance electrochemical performance of the H+/O2−/e triple-conducting BaCo0.4Fe0.4Zr0.1Y0.1O3-δ (BCFZY) perovskite cathode for YSZ-based SOFCs. The F−-doped BCFZY as BaCo0.4Fe0.4Zr0.1Y0.1O2.95-δF0.05 (BCFZYF) retained the cubic structure with better symmetry. The doping of minor fluorine in oxygen-site was found to increase the oxygen exchange capability and thus oxygen reduction reaction (ORR) catalytical activity, as reflected by lower area specific resistance (ASR) of cathode on symmetrical cells. Maximum power density of 786 mWcm−2 was achieved at 800 °C for anode-supported single cell with BCFZYF cathode, being 1.7 times higher than that with BCFZY cathode. Furthermore, the single cell with BCFZYF cathode demonstrated excellent stability without any degradation of current density over 200 h at 700 °C. The present work clarifies that the fluorine doping strategy is highly effective to promote the ORR activity of the triple-conducting BCFZY cathode for state-of-the-art oxygen-conducting SOFC.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Electronic and Structural Properties of Oxides · Fuel Cells and Related Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (38)

Show source-provided references
2. Materials for fuel-cell technologies10.1038/35104620 ↗
3. Materials for solid oxide fuel cells10.1021/cm902640j ↗
4. Efficient and stable conversion of oxygen-bearing low-concentration coal mine methane by the electrochemical catalysis of SOFC anode: from pollutant to clean energy10.1016/j.apcatb.2019.118413 ↗
5. Investigation of cobalt-free cathode material Sm0.5Sr0.5Fe0.8Cu0.2O3-δ for intermediate temperature solid oxide fuel cell10.1016/j.ijhydene.2010.04.021 ↗
6. Effect of LSM–YSZ cathode on thin-electrolyte solid oxide fuel cell performance10.1016/S0167-2738(96)00524-3 ↗
7. Advanced synthesis of materials for intermediate- temperature solid oxide fuel cells10.1016/j.pmatsci.2011.08.002 ↗
8. Optimization of electrochemical performance of Ca3Co2O6 cathode on yttria-stabilized zirconia electrolyte for intermediate temperature solid oxide fuel cells10.1016/j.ijhydene.2013.10.090 ↗
9. Oxygen reduction in solid oxide fuel cell cathodes10.1021/cr020724o ↗
10. Development of double-perovskite compounds as cathode materials for low-temperature solid oxide fuel cells10.1002/anie.201407006 ↗
11. Highly CO2-tolerant cathode for intermediate-temperature solid oxide fuel cells: samarium-doped ceria-protected SrCo0.85Ta0.15O3-δ hybrid10.1021/acsami.6b12606 ↗
12. Highly stable Sr-free cobaltite-based perovskite cathodes directly assembled on a barrier-layer-free Y2O3-ZrO2 electrolyte of solid oxide fuel cells
13. Fabrication of lanthanum strontium cobalt ferrite-gadolinium-doped ceria composite cathodes using a low-price inkjet printer10.1021/acsami.7b11462 ↗
14. A high performance cathode for the next generation solid-oxide fuel cells10.1038/nature02863 ↗
15. A niobium and tantalum co-doped perovskite cathode for solid oxide fuel cells operating below 500 °C10.1038/ncomms13990 ↗
16. High performance proton-conducting solid oxide fuel cells with a layered perovskite GdBaCuCoO5+x cathode10.1007/s13391-018-0023-4 ↗
17. Improving the chemical stability of BaCe0.8Sm0.2O3-δ electrolyte by Cl doping for proton-conducting solid oxide fuel cell10.1016/j.elecom.2012.12.012 ↗
18. Fluorination of epitaxial oxides: synthesis of perovskite oxyfluoride thin films10.1021/ja410954z ↗
19. Anion doping: a new strategy for developing high-performance perovskite-type cathode materials of solid oxide fuel cells10.1002/aenm.201700242 ↗
20. Enhancing oxygen reduction reaction activity of perovskite oxides cathode for solid oxide fuel cells using a novel anion doping strategy10.1016/j.ijhydene.2018.04.167 ↗
21. Improved visible-light photocatalytic activity of NaTaO3 with perovskite-like structure via sulfur anion doping10.1016/j.apcatb.2014.10.049 ↗
22. Conducting membranes: unprecedented perovskite oxyfluoride membranes with high-efficiency oxygen ion transport paths for low-temperature oxygen permeation10.1002/adma.201670125 ↗
23. A labile hydride strategy for the synthesis of heavily nitridized BaTiO310.1038/nchem.2370 ↗
24. Highly durable, coking and sulfur tolerant, fuel-flexible protonic ceramic fuel cells10.1038/s41586-018-0082-6 ↗
25. Readily processed protonic ceramic fuel cells with high performance at low temperatures10.1126/science.aab3987 ↗
26. Boosting the activity of BaCo0.4Fe0.4Zr0.1Y0.1O3−δ perovskite for oxygen reduction reactions at low-to-intermediate temperatures through tuning B-site cation deficiency10.1002/aenm.201902384 ↗
27. Conducting membranes: unprecedented perovskite oxyfluoride membranes with high-efficiency oxygen ion transport paths for low-temperature oxygen permeation10.1002/adma.201670125 ↗
28. Perovskite-Type halo-oxide La1-xSrxFeO3-δXσ (X=F, Cl), catalysts selective for the oxidation of ethane to ethene10.1006/jcat.1999.2677 ↗
29. Nanosized perovskite-type oxides La1−xSrxMO3−δ (M= Co, Mn; x= 0, 0.4) for the catalytic removal of ethylacetate10.1016/j.cattod.2007.06.027 ↗
30. One-pot synthesis of a mesoporous NiCo2O4 nanoplatelet and graphene hybrid and its oxygen reduction and evolution activities as an efficient bi-functional electrocatalyst10.1039/c3ta01402a ↗
31. Chemical structures and performance of perovskite oxides10.1021/cr980129f ↗
32. Preparation of dense and uniform La0.6Sr0.4Co0.2Fe0.8O3-δ (LSCF) films for fundamental studies of SOFC cathodes10.1016/j.jpowsour.2009.01.090 ↗
33. Synthesis and characterization of the SrxBa1-xFeO3-y-system and the fluorinated phases SrxBa1-xFeO2F10.1016/j.solidstatesciences.2010.06.002 ↗
34. Synthesis and characterisation of La1-xCaxFeO3 perovskite-type oxide catalysts for total oxidation of volatile organic compounds10.1016/j.apcatb.2005.11.018 ↗
35. The role of A-site ion nonstoichiometry in the oxygen absorption properties of Sr1+xCo0.8Fe0.2O3 oxides10.1002/aic.12246 ↗
36. High-performance oxygen-permeable membranes with an asymmetric structure using Ba0.95La0.05FeO3-δ perovskite-type oxide10.1002/adma.200903953 ↗
37. High performance intermediate temperature solid oxide fuel cells with Ba0.5Sr0.5Co0.8Fe0.1Nb0.1O3-δ as cathode10.1016/j.ceramint.2016.08.137 ↗
38. A Zn-doped Ba0.5Sr0.5Co0.8Fe0.2O3-δ perovskite cathode with enhanced ORR catalytic activity for SOFCs10.3390/catal10020235 ↗