Dimensional stability mechanisms of binderless boards by heat or steam treatment: a review
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Natural Fiber Reinforced Composites · Lignin and Wood Chemistry · Wood Treatment and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (100+)
Show source-provided references
1. Ahmed SA, Morén T, Hagman O, Cloutier A, Fang C-H, Elustondo D (2013) Anatomical properties and process parameters affecting blister blow formation in densified European aspen and downy birch sapwood boards by thermo-hygro-mechanical compression. J Mater Sci 48:8571–857910.1007/s10853-013-7679-9 ↗
2. Altgen M, Awais M, Altgen D, Kyyrö S, Seppäläinen H, Rautkari L (2020) Micro-tensile behavior of Scots pine sapwood after heat treatments in superheated steam or pressurized hot water. J Mater Sci 55:12621–1263510.1007/s10853-020-04943-6 ↗
3. Alvarez C, Rojas OJ, Rojano B, Ganan P (2015) Development of self-bonded fiberboards from fiber of leaf plantain: effect of water and organic extractive removal. BioRes 10(1):672–683
4. Ang AF, Ashaari Z, Lee SH, Tahir PM, Halis R (2019) Lignin-based copolymer adhesives for composite wood panels. Int J Adhesion Adhes 95:102408. https://doi.org/10.1016/j.ijadhadh.2019.10240810.1016/j.ijadhadh.2019.102408 ↗
5. Anglès MN, Ferrando F, Farriol X, Salvadó J (2001) Suitability of steam exploded residual softwood for the production of binderless panels. Effect of the pre-treatment severity and lignin addition. Biomass Bioenerg 21:211–22410.1016/S0961-9534(01)00031-9 ↗
6. Antov P, Savov V, Neykov N (2020) Sustainable bio-based adhesives for eco-friendly wood composites. A review. Wood Res 65(1):51–6210.37763/wr.1336-4561/65.1.051062 ↗
7. Aydemir D, Gunduz G, Altuntaş E, Ertas M, Şahin HT, Alma MH (2011) Investigating changes in the chemical constituents and dimensional stability of heat-treated hornbeam and uludag fir wood. BioRes 6(2):1308–132110.15376/biores.6.2.1308-1321 ↗
8. Boehm RM (1930) The masonite process. Ind Eng Chem 22(5):493–49710.1021/ie50245a019 ↗
9. Boon JG, Hashim R, Sulaiman O, Hiziroglu S, Sugimoto T, Sato M (2013) Influence of processing parameters on some properties of oil palm trunk binderless particleboard. Eur J Wood Prod 71:583–589. https://doi.org/10.1007/s00107-013-0712-510.1007/s00107-013-0712-5 ↗
10. Boonstra MJ, Pizzi A, Zomers F, Ohlmeyer M, Paul W (2006) The effects of a two-stage heat treatment process on the properties of particleboard. Holz Als Roh-Und Werkstoff 64:157–164. https://doi.org/10.1007/s00107-005-0055-y10.1007/s00107-005-0055-y ↗
11. Budakçi M, Pelit H, Sönmez A, Korkmaz M (2016) The effects of densification and heat post-treatment on hardness and morphological properties of wood materials. BioRes 11(3):7822–783810.15376/biores.11.3.7822-7838 ↗
12. Cabral JP, Kafle B, Subhani M, Reiner J, Ashraf M (2022) Densification of timber: a review on the process, material properties, and application. J Wood Sci 68:20. https://doi.org/10.1186/s10086-022-02028-310.1186/s10086-022-02028-3 ↗
13. Cai L, Wang F, Jian L (1995) Optimum steam pretreating technique of chips for manufacturing of particleboards. Holz Als Roh- Und Werkstoff 53:21–2310.1007/BF02716379 ↗
14. Čermák P, Dejmal A, Paschová Z, Kymäläinen M, Dömény J, Brabec M, Hess D, Rautkari L (2019) One-sided surface charring of beech wood. J Mater Sci 54:9497–950610.1007/s10853-019-03589-3 ↗
15. Çetin NS, Özmen N (2003) Studies on lignin-based adhesives for particleboard panels. Turk J Agric for 27(3):183–189
16. Çolak S, Çolakoǧlu G, Aydin I, Kalaycioǧlu H (2007) Effects of steaming process on some properties of eucalyptus particleboard bonded with UF and MUF adhesives. Build Environ 42:304–309. https://doi.org/10.1016/j.buildenv.2005.08.01310.1016/j.buildenv.2005.08.013 ↗
17. Dababi I, Gimello O, Elaloui E, Quignard F, Brosse N (2016) Organoslov lignin-based wood adhesive. Influence of the lignin extraction conditions on the adhesive performance. Polymers 8:340. https://doi.org/10.3390/polym809034010.3390/polym8090340 ↗
18. Dwianto W, Tanaka F, Inoue M, Norimoto M (1996) Crystallinity changes of wood by heat or steam treatment. Wood Res 83:47–49
19. Dwianto W, Inoue M, Norimoto M (1997) Fixation of compressive deformation of wood by heat treatment. Mokuzai Gakkaishi 43:303–309
20. Dwianto W, Morooka T, Norimoto M (1998a) The compressive stress relaxation of albizia (paraserienthes falcata becker) wood during heat treatment. Mokuzai Gakkaishi 44:403–409
21. Dwianto W, Inoue M, Norimoto M (1998b) Permanent fixation of compressive deformation of albizia wood (Paraserienthes falcataria) by heat treatment. J Trop for Prod 4:59–67
22. Dwianto W, Norimoto M, Morooka T, Tanaka F, Inoue M, Liu Y (1998c) Radial compression of sugi wood (Cryptomeria japonica D. Don). Holz Als Roh-Und Werkstoff 56:403–41110.1007/s001070050342 ↗
23. Dwianto W, Morooka T, Norimoto M, Kitajima T (1999) Stress relaxation of sugi (Cryptomeria japonica d. Don) wood in radial compression under high temperature steam. Holzforschung 53:541–54610.1515/HF.1999.089 ↗
24. Dwianto W, Morooka T, Norimoto M (2000) Compressive creep of wood under high temperature steam. Holzforschung 54:104–108. https://doi.org/10.1515/HF.2000.01710.1515/HF.2000.017 ↗
25. Dwianto W, Inoue M, Morooka T, Norimoto M (2006) Mechanism of permanent fixation of transversal compressed deformation of wood heat or steam treatment. In: Imamura Y, Umezawa T, Hata T (eds) Sustainable development and tropical forest resources. Kyoto University, Kyoto, pp 35–41
26. Fahmy TYA, Mobarak F (2013) Advanced binderless board-like green nanocomposites from undebarked cotton stalks and mechanism of self-bonding. Cellulose 20:1453–145710.1007/s10570-013-9911-9 ↗
27. Ferrandez-Garcia CC, Garcia-Ortuño T, Ferrandez-Garcia MT, Ferrandez-Villena M, Ferrandez-Garcia CE (2017) Fire-resistance, physical, and mechanical characterization of binderless rice straw particleboards. BioRes 12(4):8539–854910.15376/biores.12.4.8539-8549 ↗
28. Ferrandez-Garcia A, Ferrandez-Garcia MT, Ortuño TG, Mata-Cabrera F, Ferrandez-Villena M (2022) Analysis of the manufacturing variables of binderless panels made of leaves of olive tree (Olea Europaea L.) pruning waste. Agronomy 12:93. https://doi.org/10.3390/agronomy1201009310.3390/agronomy12010093 ↗
29. Frihart CR (2015) Wood adhesives: past, present, and future. For Prod J 65(1–2):4–8. https://doi.org/10.13073/65.1-2.410.13073/65.1-2.4 ↗
30. Fu Q, Cloutier A, Laghdir A (2016) Optimization of the thermohygromechanical (THM) process for sugar maple wood densification. BioRes 11(4):8844–885910.15376/biores.11.4.8844-8859 ↗
31. Fu Q, Cloutier A, Laghdir A (2017) Effects of heat and steam on the mechanical properties and dimensional stability of thermo-hygromechanically-densified sugar maple wood. BioRes 12(4):9212–922610.15376/biores.12.4.9212-9226 ↗
32. Fu Q, Cloutier A, Laghdir A, Stevanovic T (2019) Surface chemical changes of sugar maple wood induced by thermos-hygromechanical (THM) treatment. Materials 12:1946. https://doi.org/10.3390/ma1212194610.3390/ma12121946 ↗
33. Gao Z, Huang R (2022) Effects of pressurized superheated steam treatment on dimensional stability and its mechanisms in surface-compressed wood. Forests 13:1230. https://doi.org/10.3390/f1308123010.3390/f13081230 ↗
34. Gao Z, Wang X, Wan H, Brunette G (2011) Binderless panels made with black spruce bark. BioRes 6(4):3960–397210.15376/biores.6.4.3960-3972 ↗
35. Garcia RA, Riedl B, Cloutier A (2008) Chemical modification and wetting of medium density fibreboard produced from heat-treated fibres. J Mater Sci 43:5037–504410.1007/s10853-008-2596-z ↗
36. Geimer RL, Price EW (1986) Steam injection pressing-large panel fabrication with southern hardwoods. In: Proceedings of the 20th international particleboard/composite materials symposium, 1986:367–384
37. Gong M, Lamason C, Li L (2010) Interactive effect of surface densification and post-heat-treatment on aspen wood. J Mater Process Technol 210:293–29610.1016/j.jmatprotec.2009.09.013 ↗
38. Gong X, Meng Y, Lu J, Tao Y, Cheng Y, Wang H (2022) A review on lignin-based phenolic resin adhesive. Macromol Chem Phys. https://doi.org/10.1002/macp.20210043410.1002/macp.202100434 ↗
39. Gößwald J, Barbu M, Petutschnigg A, Tudor EM (2021) Binderless thermal insulation panels made of spruce bark fibres. Polymers 13:1799. https://doi.org/10.3390/polym1311179910.3390/polym13111799 ↗
40. Guller B (2012) Effects of heat treatment on density, dimensional stability and color of Pinus nigra wood. Afr J Biotechnol 11(9):2204–2209
41. Guo Y, Zheng X, Xu J, Dai X (2018) Steam injection-pressing preparation and forming mechanism of binderless ramie stem particleboard for modern furniture. Destech Trans Eng Technol Res. https://doi.org/10.12783/dtetr/icace2018/2550710.12783/dtetr/icace2018/25507 ↗
42. Hashim R, Saari N, Sulaiman O, Sugimoto T, Hiziroglu S, Sato M, Tanaka R (2010) Effect of particle geometry on the properties of binderless particleboard manufactured from oil palm trunk. Mater Des 31(9):4251–4257. https://doi.org/10.1016/j.matdes.2010.04.01210.1016/j.matdes.2010.04.012 ↗
43. Hashim R, Nadhari WNAW, Sulaiman O, Kawamura F, Hiziroglu S, Sato M, Sugimoto T, Seng TG, Tanaka R (2011a) Characterization of raw materials and manufactured binderless particleboard from oil palm biomass. Mater Des 32(1):246–254. https://doi.org/10.1016/j.matdes.2010.05.05910.1016/j.matdes.2010.05.059 ↗
44. Hashim R, Said N, Lamaming J, Baskaran M, Sulaiman O, Sato M, Hiziroglu S, Sugimoto T (2011b) Influence of press temperature on the properties of binderless particleboard made from oil palm trunk. Mater Des 32(5):2520–2525. https://doi.org/10.1016/j.matdes.2011.01.05310.1016/j.matdes.2011.01.053 ↗
45. Hemmilä V, Adamopoulos S, Karlsson O, Kumar A (2017) Development of sustainable bio-adhesives for engineered wood panels—a review. RSC Adv 7:38604. https://doi.org/10.1039/c7ra06598a10.1039/c7ra06598a ↗
46. Hidalgo-Cordero JF, García-Ortuño T, García-Navarro J (2020) Comparison of binderless boards produced with different tissues of totora (Schoenoplectus californicus (C.A. Mey) Soják) stems. J Build Eng 27:100961. https://doi.org/10.1016/j.jobe.2019.10096110.1016/j.jobe.2019.100961 ↗
47. Hidayat H, Keijsers ERP, Prijanto U, van Dam JEG, Heeres HJ (2014) Preparation and properties of binderless boards from Jatropha curcas L. seed cake. Ind Crops Prod 52:245–25410.1016/j.indcrop.2013.10.024 ↗
48. Hill CAS (2006) Wood modification: chemical, thermal and other processes. John Wiley & Sons, West Sussex10.1002/0470021748 ↗
49. Hill C, Altgen M, Rautkari L (2021) Thermal modification of wood-a review: chemical changes and hygroscopicity. J Mater Sci 56:6581–661410.1007/s10853-020-05722-z ↗
50. Hillis WE, Rozsa AN (1978) The softening temperature of wood. Holzforchung 32:68–73. https://doi.org/10.1515/hfsg.1978.32.2.6810.1515/hfsg.1978.32.2.68 ↗
51. Hsu WE, Schwald W, Schwald J, Shields JA (1988) Chemical and physical changes required for producing dimensionally stable wood-based composites part 1: steam pretreatment. Wood Sci Technol 22:281–289. https://doi.org/10.1007/bf0038602310.1007/bf00386023 ↗
52. Hussin MH, Aziz AA, Iqbal A, Ibrahim MNM, Latif NAH (2019) Development and characterization novel bio-adhesive for wood using kenaf core (Hibiscus cannabinus) lignin and glyoxal. Int J Biol Macromol 122:713–722. https://doi.org/10.1016/j.ijbiomac.2018.11.00910.1016/j.ijbiomac.2018.11.009 ↗
53. Inari GN, Petrissans M, Lambert J, Ehrhardt JJ, Gérardin P (2006) XPS characterization of wood chemical composition after heat-treatment. Surf Interface Anal 38:1336–1342. https://doi.org/10.1002/sia.245510.1002/sia.2455 ↗
54. Inoue M, Norimoto M (1991) Permanent fixation of compressive deformation in wood by heat treatment. Wood Res Tech Notes 27:31–40
55. Inoue M, Norimoto M, Tanahashi M, Rowell RM (1993) Steam or heat fixation of compressed wood. Wood Fiber Sci 25:224–235
56. Iswanto AH, Febrianto F, Wahyudi I, Hwang WJ, Lee SH, Kwon JH, Kwon SM, Kim NH, Kondo T (2010) Effect of pre-treatment techniques on physical, mechanical and durability properties of oriented strand board made from sentang wood (Melia excelsa Jack). J Fac Agr Kyushu Univ 55(2):371–377. https://doi.org/10.5109/1885410.5109/18854 ↗
57. Ito Y, Tanahashi M, Shigematsu M, Shinoda Y, Ohta C (1998) Compressive-molding of wood by high-pressure steam-treatment: Part 1. Development of compressively molded squares from thinnings. Holzforschung 52:211–21610.1515/hfsg.1998.52.2.211 ↗
58. Junior CPA, Coaquira CAC, Mattos ALA, MdSMsD F, Feitosa JPdA, de Morais JPS, MdeFD R (2017) Binderless fiberboards made from unripe coconut husks. Waste Biomass Valor 9:2245–2254. https://doi.org/10.1007/s12649-017-9979-910.1007/s12649-017-9979-9 ↗
59. Kamdem DP, Pizzi A, Jermannaud A (2002) Durability of heat-treated wood. Holz Als Roh- Und Werkstoff 60:1–610.1007/s00107-001-0261-1 ↗
60. Kamke FA, Rathi VM (2011) Apparatus for viscoelastic thermal compression of wood. Eur J Wood Prod 69:483–48710.1007/s00107-010-0461-7 ↗
61. Kariz M, Kuzman MK, Sernek M, Hughes M, Rautkari L, Kamke FA, Kutnar A (2017) Influence of temperature of thermal treatment on surface densification of spruce. Eur J Wood Prod 75:113–12310.1007/s00107-016-1052-z ↗
62. Karthäuser J, Biziks V, Mai C, Militz H (2021) Lignin and lignin-derived compounds for wood applications—a review. Molecules 26:1–15. https://doi.org/10.3390/molecules2609253310.3390/molecules26092533 ↗
63. Kocaefe D, Chaudhry B, Poncsak S, Bouazara M, Pichette A (2007) Thermogravimetric study of high temperature treatment of aspen: effect of treatment parameters on weight loss and mechanical properties. J Mater Sci 42:854–86610.1007/s10853-006-0054-3 ↗
64. Kurokochi Y, Sato M (2015a) Effect of steam explosion and grinding on binderless board made from rice straw. Wood Res 60(5):791–799
65. Kurokochi Y, Sato M (2015b) Properties of binderless board made from rice straw: the morphological effect of particles. Ind Crops Prod 69:55–59. https://doi.org/10.1016/j.indcrop.2015.01.04410.1016/j.indcrop.2015.01.044 ↗
66. Kurokochi Y, Sato M (2015c) Effect of surface structure, wax and silica on the properties of binderless board made from rice straw. Ind Crops Prod 77:949–95310.1016/j.indcrop.2015.10.007 ↗
67. Kurokochi Y, Sato M (2020) Steam treatment to enhance rice straw binderless board focusing hemicellulose and cellulose decomposition products. J Wood Sci 66(7):1–8. https://doi.org/10.1186/s10086-020-1855-810.1186/s10086-020-1855-8 ↗
68. Kutnar A, Kamke FA (2012) Influence of temperature and steam environment on set recovery of compressive deformation of wood. Wood Sci Technol 46:953–96410.1007/s00226-011-0456-5 ↗
69. Kutnar A, Šernek M (2007) Densification of wood. Zbornik Gozdarstva in Lesarstva 82:53–62
70. Kwon JH, Geimer RL (1998) Impact of steam pressing variables on the dimensional stabilization of flakeboard. For Prod J 48:55–61
71. Kymäläinen M, Hautamäki S, Lillqvist K, Segerholm K, Rautkari L (2017) Surface modification of solid wood by charring. J Mater Sci 52:6111–611910.1007/s10853-017-0850-y ↗
72. Kymäläinen M, Mlouka SB, Belt T, Merk V, Liljeström V, Hänninen T, Uimonen T, Kostiainen M, Rautkari L (2018) Chemical, water vapour sorption and ultrastructural analysis of Scots pine wood thermally modified in high-pressure reactor under saturated steam. J Mater Sci 53:3027–303710.1007/s10853-017-1714-1 ↗
73. Laemsak N, Okuma M (2000) Development of boards made from oil palm frond II: properties of binderless boards from steam-exploded fibers of oil palm frond. J Wood Sci 46:322–32610.1007/BF00766224 ↗
74. Laine K, Belt T, Rautkari L, Ramsay J, Hill CAS, Hughes M (2013) Measuring the thickness swelling and set-recovery of densified and thermally modified scots pine solid wood. J Mater Sci 48:8530–853810.1007/s10853-013-7671-4 ↗
75. Laine K, Segerholm K, Wålinder M, Rautkari L, Ormondroyd G, Hughes M, Jones D (2014) Micromorphological studies of surface densified wood. J Mater Sci 49:2027–203410.1007/s10853-013-7890-8 ↗
76. Laine K, Segerholm K, Wålinder M, Rautkari L, Hughes M (2016) Wood densification and thermal modification: hardness, set-recovery and micromorphology. Wood Sci Technol 50:883–894. https://doi.org/10.1007/s00226-016-0835-z10.1007/s00226-016-0835-z ↗
77. Le X, An J, Zhang G, Wang L, Fan J, Wang P, Xie P (2016) Investigation of the structural characteristics of corn stalk during hot-pressing. BioRes 11(4):10213–1022510.15376/biores.11.4.10213-10225 ↗
78. Lee SH, Ashaari Z, Lum WC, Halip JA, Ang AF, Tan LP, Chin KL, Tahir PM (2018) Thermal treatment of wood using vegetable oils: a review. Constr Build Mater 181:408–41910.1016/j.conbuildmat.2018.06.058 ↗
79. Lestari ASRD, Hadi YS, Hermawan D, Santoso A, Pizzi A (2019) Physical and mechanical properties of glued-laminated lumber from fast-growing tree species using mahogany tannin adhesive. Wood Fiber Sci 51(2):1–12. https://doi.org/10.22382/wfs-2019-xxx10.22382/wfs-2019-xxx ↗
80. Li X, Zheng X, Li H (2011) Steam-injection pressing technology of man-made board. Key Eng Mater 474–476:1351–1355. https://doi.org/10.4028/www.scientific.net/KEM.474-476.135110.4028/www.scientific.net/KEM.474-476.1351 ↗
81. Li D-L, Wu J-Q, Peng W-X, Xiao W-F, Wu J-G, Zhuo J-Y, Yuan T-Q, Sun R-C (2015) Effect of lignin on bamboo biomass self-bonding during hot-pressing: lignin structure and characterization. BioRes 10(4):6769–678210.15376/biores.10.4.6769-6782 ↗
82. Luan Y, Fang C-H, Ma Y-F, Fei B-H (2022) Wood mechanical densification: a review on processing. Mater Manuf Process 37(4):359–37110.1080/10426914.2021.2016816 ↗
83. Lui FHY, Kurokochi Y, Narita H, Saito Y, Sato M (2018) The effects of chemical components and particle size on the mechanical properties of binderless boards made from oak (Quercus spp.) logs degraded by shiitake fungi (Lentinula edodes). J Wood Sci 64:246–25510.1007/s10086-018-1695-y ↗
84. Luo H, Lei Y, Wang N, Zhang H, Lu X (2014) Manufacture of binderless fiberboard made from bamboo processing residues by steam explosion pretreatment. Wood Res 59(5):861–870
85. Macias N, Knowles C, Kamke F, Kutnar A (2011) Commercialization potential of viscoelastic thermal compressed wood: Insights from the US Forest Products Industry. For Prod J 61(7):500–509
86. Mancera C, Ferrando F, Salvadó (2008) Cynara cardunculus as raw material for the production of binderless fiberboards: optimization of pretreatment and pressing conditions. J Wood Chem Technol 28:207–22610.1080/02773810802347024 ↗
87. Mancera C, El Mansouri N-E, Ferrando F, Salvado J (2011) The suitability of steam exploded Vitis vinifera and alkaline lignin for the manufacture of fiberboard. BioRes 6(4):4439–445310.15376/biores.6.4.4439-4453 ↗
88. Mason WH (1928) Dried structural insulating board and process of making same, application no. US1663504A
89. Mawardi I, Aprilia S, Faisal M, Ikramullah RS (2022) An investigation of thermal conductivity and sound absorption from binderless panels made of oil palm wood as bio-insulation. Res Eng 13:100319. https://doi.org/10.1016/j.rineng.2021.10031910.1016/j.rineng.2021.100319 ↗
90. Mo X, Cheng E, Wang D, Sun S (2003) Physical properties of medium-density wheat straw particleboard using different adhesives. Ind Crops Prod 18:47–5310.1016/S0926-6690(03)00032-3 ↗
91. Mobarak F, Fahmy Y, Augustin H (1982) Binderless lignocellulose composite from bagasse and mechanism of self-bonding. Holzforschung 36(3):131–13510.1515/hfsg.1982.36.3.131 ↗
92. Nadhari WNAW, Hashim R, Sulaiman O, Sato M, Sugimoto T, Selamat ME (2013) Utilization of oil palm trunk waste for manufacturing of binderless particleboard: optimization study. BioRes 8(2):1675–1696
93. Nadhari WNAW, Hashim R, Hiziroglu S, Sulaiman O, Boon JG, Salleh KM, Awalludin MF, Sato M, Sugimoto T (2014) Measurement of some properties of binderless composites manufactured from oil palm trunks and acacia mangium. Measurement 50:250–25410.1016/j.measurement.2014.01.002 ↗
94. Nadhari WNAW, Danish M, Nasir MSRM, Geng BJ (2019) Mechanical properties and dimensional stability of particleboard fabricated from steam pre-treated banana trunk waste particles. J Build Eng 26:100848. https://doi.org/10.1016/j.jobe.2019.10084810.1016/j.jobe.2019.100848 ↗
95. Nadhari WNAW, Karim NA, Boon JG, Salleh KM, Mustapha A, Hashim R, Sulaiman O, Azni ME (2020) Sugarcane (Saccharum officinarium L.) Bagasse binderless particleboard: effect of hot pressing time study. Mater Today Proc 31:313–317. https://doi.org/10.1016/j.matpr.2020.06.01610.1016/j.matpr.2020.06.016 ↗
96. Nakano K, Ando K, Takigawa M, Hattori N (2018) Life cycle assessment of wood-based boards produces in Japan and impact of formaldehyde emissions during the use stage. Int J Life Cycle Assess 23:957–96910.1007/s11367-017-1343-6 ↗
97. Nasir M, Khali DP, Jawaid M, Tahir PM, Siakeng R, Asim M, Khan TA (2019) Recent development in binderless fiber-board fabrication from agricultural residues: a review. Constr Build Mater 211:502–51610.1016/j.conbuildmat.2019.03.279 ↗
98. Neto CP, Seca A, Nunes AM, Coimbra MA, Domingues F, Evtuguin D, Silvestre A, Cavaleiro JAS (1997) Variations in chemical composition and structure of macromolecular components in different morphological regions and maturity stages of Arundo donax. Ind Crops Prod 6:51–5810.1016/S0926-6690(96)00205-1 ↗
99. Nonaka S, Umemura K, Kawai S (2013) Characterization of bagasse binderless particleboard manufactured in high-temperature range. J Wood Sci 59:50–5610.1007/s10086-012-1302-6 ↗
100. Nuopponen M, Vuorinen T, Jámsä S, Viitaniemi P (2004) Thermal modifications in softwood studied by FT-IR and UV resonance raman spectroscopies. J Wood Chem Technol 24:13–2610.1081/WCT-120035941 ↗