Differences and similarities between kraft and oxygen delignification of softwood fibers: effects on chemical and physical properties
Source abstract
Abstract
Abstract The fiber properties after oxygen delignification and kraft pulping were studied by looking into the chemical characteristics and morphology. The effect of the two processes on the fibers was evaluated and compared over a wider kappa number range (from 62 down to15). Wide-angle X-ray scattering, nuclear magnetic resonance and fiber saturation point were used to characterize the fiber network structure. Fiber morphology and fiber dislocations were evaluated by an optical image analysis. The total and surface fiber charges were studied by conductometric and polyelectrolyte titrations. The fiber wall supramolecular structure, such as crystallinity, size of fibril aggregates, pore size and pore volume, were similar for the two processes. The selectivity, in terms of carbohydrate yield, was equal for kraft cooking and oxygen delignification, but the selectivity in terms of viscosity loss per amount of delignification is poorer for oxygen delignification. Clearly more fiber deformations (2–6% units in curl index) in the fibers after oxygen delignification were seen. Introduction of curl depended on the physical state of the fibers, i.e. liberated or in wood matrix. In the pulping stage, the fiber continue to be supported by neighboring fibers, as the delignified chips maintain their form. However, in the subsequent oxygen stage the fibers enter in the form of pulp (liberated fibers), which makes them more susceptible to changes in fiber form. Graphic abstract
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Advanced Cellulose Research Studies · Lignin and Wood Chemistry · Wood Treatment and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (62)
Show source-provided references
1. Ander P, Daniel G, Lindgren CG, Marklund A (2005) Characterization of industrial and laboratory pulp fibres using HCl, cellulase and FiberMaster analysis. Nord Pulp Pap Res J 20:115–12110.3183/npprj-2005-20-01-p115-121 ↗
2. Ander P, Hildén L, Daniel G (2008) Cleavage of softwood kraft pulp fibres by HCl and cellulases. BioResources 3:477–49010.15376/biores.3.2.477-490 ↗
3. Andreasson B, Forsström J, Wågberg L (2003) The porous structure of pulp fibres with different yields and its influence on paper strength. Cellulose 10:111–12310.1023/A:1024055406619 ↗
4. Bergnor-Gidnert E, Tomani PE, Dahlman O (1998) Influence on pulp quality of conditions during the removal of hexenuronic acids. Nord Pulp Pap Res J 13:310–31610.3183/npprj-1998-13-04-p310-316 ↗
5. Bhardwaj NK, Duong TD, Hoang V, Nguyen KL (2004) Determination of fiber charge components of Lo-Solids unbleached kraft pulps. J Colloid Interface Sci 274:543–54910.1016/j.jcis.2003.12.062 ↗
6. Brännvall E (2009a) Overview of pulp and paper processes. In: Ek M, Gellerstedt G, Henriksson G (eds) Pulping chemistry and technology, vol 2. Walter de Gruyter, Berlin, pp 1–13
7. Brännvall E (2009b) Pulping technology. In: Ek M, Gellerstedt G, Henriksson G (eds) Pulping chemistry and technology. Walter de Gruyter, Berlin, p 12110.1515/9783110213423.121 ↗
8. Brännvall E (2017) The limits of delignification in kraft cooking. BioResources 12:2081–2107. https://doi.org/10.15376/biores.12.1.Brannvall10.15376/biores.12.1.Brannvall ↗
9. Buchert J, Bergnor E, Lindblad G, Viikari L, Ek M (1997) Significance of xylan and glucomannan in the brightness reversion of kraft pulps. Tappi J 80:165–171
10. Campbell WB (1959) The mechanism of bonding. Tappi J 42:999–1001
11. Chai X-S, Hou Q, Zhu J (2003) Carboxyl groups in wood fibers. 2 the fate of carboxyl groups during alkaline delignification and its application for fiber yield prediction in alkaline pulping. Ind Eng Chem Res 42:5445–544910.1021/ie0209733 ↗
12. Chunilall V, Bush T, Larsson PT, Iversen T, Kindness A (2010) A CP/MAS 13C-NMR study of cellulose fibril aggregation in eucalyptus dissolving pulps during drying and the correlation between aggregate dimensions and chemical reactivity. Holzforschung 64:693–69810.1515/hf.2010.097 ↗
13. Courchene CE, McDonough TJ, Page DH (2002) Effects of bleach plant processing on fiber strength. In: 2002 TAPPI Fall Technical Conference https://smartech.gatech.edu/bitstream/handle/1853/32458/tps944.pdf?sequence=1&isAllowed=y
14. Dang Z, Elder T, Ragauskas AJ (2006) Influence of kraft pulping on carboxylate content of softwood kraft pulps. Ind Eng Chem Res 45:4509–451610.1021/ie060203h ↗
15. Duchesne I, Hult E, Molin U, Daniel G, Iversen T, Lennholm H (2001) The influence of hemicellulose on fibril aggregation of kraft pulp fibres as revealed by FE-SEM and CP/MAS 13C-NMR. Cellulose 8:103–11110.1023/A:1016645809958 ↗
16. Esteves CVG, Brännvall E, Östlund S, Sevastyanova O (2020) Evaluating the potential to modify pulp and paper properties through oxygen delignification ACS. Omega 5:13703–13711. https://doi.org/10.1021/acsomega.0c0086910.1021/acsomega.0c00869 ↗
17. Gellerstedt G (2009) Chemistry of chemical pulping. In: Ek M, Gellerstedt G, Henriksson G (eds) Pulping chemistry and technology, vol 2. Walter de Gruyter, Berlin, pp 91–12010.1515/9783110213423.91 ↗
18. Gellerstedt G, Li J (1996) An HPLC method for the quantitative determination of hexeneuronic acid groups in chemical pulps. Carbohydr Res 294:41–5110.1016/S0008-6215(96)00198-X ↗
19. Gellerstedt G, Lindfors E-L (1984) Structural changes in lignin during kraft pulping. Holzforschung 38:151–15810.1515/hfsg.1984.38.3.151 ↗
20. Gierer J, Norén I (1980) On the course of delignification during kraft pulping. Holzforschung-Int J Biol Chem, Phys Technol Wood 34:197–200
21. Hartler N (1995) Aspects on curled and microcompressed fibers. Nord Pulp Pap Res J 10:4–710.3183/npprj-1995-10-01-p004-007 ↗
22. Heijnesson A, Simonson R, Westermark U (1995) Removal of lignin-rich surface material from unbleached kraft fibres. Holzforschung 49:313–31810.1515/hfsg.1995.49.4.313 ↗
23. Hult E-L, Larsson P, Iversen T (2001) Cellulose fibril aggregation—an inherent property of kraft pulps. Polymer 42:3309–331410.1016/S0032-3861(00)00774-6 ↗
24. Jafari V, Labafzadeh SR, King A, Kilpeläinen I, Sixta H, van Heiningen A (2014) Oxygen delignification of conventional and high alkali cooked softwood Kraft pulps, and study of the residual lignin structure. RSC Adv 4:17469–1747710.1039/C4RA00115J ↗
25. Joutsimo OP, Giacomozzi D (2015) Changes in cell wall structure during kraft processing of Pinus radiata. BioResources 10:2461–247810.15376/biores.10.2.2461-2478 ↗
26. Katz S, Beatson RP, Scallon AM (1984) The determination of strong and weak acidic groups in sulfite pulps. Svensk Papperstidn 87:48–53
27. Kimura M, Ishida T, Ono Y, Takeuchi M, Isogai A (2020) Significant contribution of fibrils on pulp fiber surface to water retention value. Nord Pulp Pap Res J 35:96–105. https://doi.org/10.1515/npprj-2018-004110.1515/npprj-2018-0041 ↗
28. Koskinen JJ, Kalkaja TL, Riippa TP (2009) Fibre and shive measurement for pulp grading and branding. Appita: Technol, Innov, Manuf Environ 62:99
29. Kouko J, Jajcinovic M, Fischer W, Ketola A, Hirn U, Retulainen E (2019) Effect of mechanically induced micro deformations on extensibility and strength of individual softwood pulp fibers and sheets. Cellulose 26:1995–2012. https://doi.org/10.1007/s10570-018-2163-y10.1007/s10570-018-2163-y ↗
30. Laine J The effect of surface chemical composition and charge on the fibre and paper properties of unbleached and bleached kraft pulps. In: Fundamentals of papermaking materials: 11th fundamental research symposium, Cambridge, September 21–26 1997. pp 859–89210.15376/frc.1997.2.859 ↗
31. Laine J, Stenius P (1997) Effect of charge on the fibre and paper properties of bleached industrial kraft pulps. Pap Puu 79:257–266
32. Larsson PT, Salmén L (2014) Influence of cellulose supramolecular structure on strength properties of chemical pulp. Holzforschung 68:861–86610.1515/hf-2013-0226 ↗
33. Larsson PT, Wickholm K, Iversen T (1997) A CP/MAS13C NMR investigation of molecular ordering in celluloses. Carbohydr Res 302:19–2510.1016/S0008-6215(97)00130-4 ↗
34. Larsson PT, Svensson A, Wågberg L (2013) A new, robust method for measuring average fibre wall pore sizes in cellulose I rich plant fibre walls. Cellulose 20:623–63110.1007/s10570-012-9850-x ↗
35. Lawoko M, Berggren R, Berthold F, Henriksson G, Gellerstedt G (2004) Changes in the lignin-carbohydrate complex in softwood kraft pulp during kraft and oxygen delignification. Holzforschung 58:603–61010.1515/HF.2004.114 ↗
36. Li B, Bandekar R, Zha Q, Alsaggaf A, Ni Y (2011) Fiber quality analysis: OpTest fiber quality analyzer versus L&W fiber tester. Ind Eng Chem Res 50:12572–1257810.1021/ie201631q ↗
37. Lin B, He B, Liu Y, Ma L (2014) Correlation analysis for fiber characteristics and strength properties of softwood kraft pulps from different stages of a bleaching fiber line. BioResources 9:5024–5033
38. McDonough TJ (1986) Oxygen bleaching processes. Tappi J 69:46–52
39. McDonough TJ Oxygen delignification. In: TAPPI Bleach Plant Operations Seminar Charleston, 1989.
40. Mohlin U-B, Alfredsson C (1990) Fibre deformation and its implications in pulp characterization. Nord Pulp Pap Res J 5:172–17910.3183/npprj-1990-05-04-p172-179 ↗
41. Mohlin U-B, Dahlbom J, Hornatowska J (1996) Fiber deformation and sheet strength. Tappi J 79:105–111
42. Page DH (1985) The mechanism of strength development of dried pulps by beating. Svensk papperstidn 88:R30
43. Page DH, Seth RS, Jordan BD, Barbe MC Curl, crimps, kinks and microcompressions in pulp fibres: Their origin, measurement and significance. In: Transactions of the 8th fundamental research symposium, London, UK, 1985. Mechanical Engineering Publications Ltd.: London, pp 183-22710.15376/frc.1985.1.183 ↗
44. Paulsson M, Heijnesson Hultén A (2003) Surface characterization of unbleached and oxygen delignified kraft pulp fibers. J Wood Chem Technol 23:31–4610.1081/WCT-120018614 ↗
45. Ragnar M, Lindgren CT, Nilvebrant N-O (2000) pKa-values of guaiacyl and syringyl phenols related to lignin. J Wood Chem Technol 20:277–30510.1080/02773810009349637 ↗
46. Scallan A, Green H (2007) The effect of pulping upon the dimensions of wood tracheids. Wood Fib Sci 7:226–233
47. Sevastyanova O (2005) On the importance of oxidizable structures in bleached kraft pulps. PhD Thesis, Royal Institute of Technology, KTH
48. Sixta H, Süss HU, Potthast A, Schwanninger M, Krotscheck AW (2006) Pulp Bleaching: Sections 7.3 - 7.3.2 vol 1. Handbook of pulp. WILEY-VCH Verlag GmbH &Co. KGaA, Weinheim10.1002/9783527619887.ch7a ↗
49. Sjöstedt A, Wohlert J, Larsson PT, Wågberg L (2015) Structural changes during swelling of highly charged cellulose fibres. Cellulose 22:2943–295310.1007/s10570-015-0701-4 ↗
50. Sjöström E (1989) The origin of charge on cellulosic fibers. Nord Pulp Pap Res J 4:90–9310.3183/npprj-1989-04-02-p090-093 ↗
51. Sjöström E (1993) Wood chemistry: fundamentals and applications, 2nd edn. Gulf professional publishing, San Diego
52. Snowman VR, Genco JM, Cole BJ, Kwon HB, Miller WJ (1999) Bond strength of oxygen-delignified kraft pulps. Tappi J 82:103–109
53. Stone JE, Scallan AM (1967) The effect of component upon the porous structure of the cell wall of wood. II swelling in water and the fiber saturation point. Tappi J 50:496–501
54. Tao L, Genco JM, Cole BJ, Fort RC Jr (2011) Selectivity of oxygen delignification for southern softwood kraft pulps with high lignin content. Tappi J 10:29–3910.32964/TJ10.8.29 ↗
55. Violette SM (2003) Oxygen delignification kinetics and selectivity improvement. PhD Thesis, University of Maine
56. Wågberg L, Ödberg L, Glad-Nordmark G (1989) Charge determination of porous substrates by polyelectrolyte adsorption. Nord Pulp Pap Res J 4:71–7610.3183/npprj-1989-04-02-p071-076 ↗
57. Yang R, Lucia L, Ragauskas AJ, Jameel H (2003) Oxygen delignification chemistry and its impact on pulp fibers. J Wood Chem Technol 23:13–29. https://doi.org/10.1081/WCT-12001861310.1081/WCT-120018613 ↗
58. Zhang DC, Chai X-S, Hou Q, Ragauskas AJ (2005) Characterization of fiber carboxylic acid development during one-stage oxygen delignification. Ind Eng Chem Res 44:9279–928510.1021/ie050489a ↗
59. Zhang DC, Pu Y, Chai X-S, Naithani V, Jameel H, Ragauskas AJ (2006) Elucidating carboxylic acid profiles for extended oxygen delignification of high-kappa softwood kraft pulps. Holzforschung 60:123–12910.1515/HF.2006.020 ↗
60. Zhang DC, Chai X-S, Pu Y, Ragauskas AJ (2007) Lignocellulosic fiber charge enhancement by catalytic oxidation during oxygen delignification. J Colloid Interface Sci 306:248–25410.1016/j.jcis.2006.10.046 ↗
61. Zhao C, Zhang H, Zeng X, Li H, Sun D (2016) Enhancing the inter-fiber bonding properties of cellulosic fibers by increasing different fiber charges. Cellulose 23:1617–1628. https://doi.org/10.1007/s10570-016-0941-y10.1007/s10570-016-0941-y ↗
62. Zou H (2002) Effect of kraft pulping on oxygen delignification. PhD Thesis, The University of Maine