Polyacrylic acid/carboxymethyl cellulose/activated carbon composite hydrogel for removal of heavy metal ion and cationic dye
Source abstract
Abstract
For the purpose of purifying polluted water, polyacrylic acid grafted carboxymethyl cellulose and activated carbon composite material (PAA/CMC/AC) was used to efficiently and selectively capture heavy metal ions and dyes in polluted water. The maximum adsorption capacity of Cu2+ and methylene blue (MB) in the independent system reached 169 mg g−1 and 119.9 mg g−1, respectively. It is worth noting that in the case of coexistence of Cu2+ and MB, the adsorption of MB is hardly affected, while adsorption capacity of the adsorbent for Cu2+ increases with the increase of MB concentration in the presence of dyes, from 169 to 193.5 mg g−1. For this, the adsorption isotherms and kinetics were fitted well by the Freundlich model and pseudo-second-order kinetic model. XPS results confirmed that surface complexation and electrostatic attraction are the main mechanisms of adsorption reaction. Finally, the regeneration performance of the adsorbent was explored. Adsorption properties of Polyacrylic acid/carboxymethyl cellulose/activated carbon composite hydrogel for heavy metal ion and cationic dye
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Adsorption and biosorption for pollutant removal · Nanomaterials for catalytic reactions · Carbon and Quantum Dots Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (53)
Show source-provided references
1. Abouzeid RE, Khiari R, El-Wakil N, Dufresne A (2019) Current state and new trends in the use of cellulose nanomaterials for wastewater treatment. Biomacromol 20:573–59710.1021/acs.biomac.8b00839 ↗
2. Allouss D, Essamlali Y, Amadine O, Chakir A, Zahouily M (2019) Response surface methodology for optimization of methylene blue adsorption onto carboxymethyl cellulose-based hydrogel beads: adsorption kinetics, isotherm, thermodynamics and reusability studies. RSC Adv 9:37858–3786910.1039/C9RA06450H ↗
3. Awual MR, Hasan MM, Rahman MM, Asiri AM (2019) Novel composite material for selective copper(II) detection and removal from aqueous media. J Mol Liq 283:772–78010.1016/j.molliq.2019.03.141 ↗
4. Bahadoran Baghbadorani N, Behzad T, Karimi Darvanjooghi MH, Etesami N (2020) Modelling of water absorption kinetics and biocompatibility study of synthesized cellulose nanofiber-assisted starch-graft-poly(acrylic acid) hydrogel nanocomposites. Cellulose 27:9927–994510.1007/s10570-020-03511-0 ↗
5. Chen B, Zhao H, Chen S, Long F, Huang B, Yang B, Pan X (2019a) A magnetically recyclable chitosan composite adsorbent functionalized with EDTA for simultaneous capture of anionic dye and heavy metals in complex wastewater. Chem Eng J 356:69–8010.1016/j.cej.2018.08.222 ↗
6. Chen W et al (2019b) Synthesis and adsorption properties of amphoteric adsorbent HAx/CMC-yAl. Sep Purif Technol 221:338–34810.1016/j.seppur.2019.04.009 ↗
7. Deng J et al (2017) Competitive adsorption of Pb(II), Cd(II) and Cu(II) onto chitosan-pyromellitic dianhydride modified biochar. J Colloid Interf Sci 506:355–36410.1016/j.jcis.2017.07.069 ↗
8. Dong L, La H, Wang Z, Gu P, Chen G, Jiang R (2018) A new function of spent activated carbon in BAC process: removing heavy metals by ion exchange mechanism. J Hazard Mater 359:76–8410.1016/j.jhazmat.2018.07.030 ↗
9. Eltaweil AS, Elgarhy GS, El-Subruiti GM, Omer AM (2020) Carboxymethyl cellulose/carboxylated graphene oxide composite microbeads for efficient adsorption of cationic methylene blue dye. Int J Biol Macromol 154:307–31810.1016/j.ijbiomac.2020.03.122 ↗
10. Fan H, Ma X, Zhou S, Huang J, Liu Y, Liu Y (2019) Highly efficient removal of heavy metal ions by carboxymethyl cellulose-immobilized Fe3O4 nanoparticles prepared via high-gravity technology. Carbohyd Polym 213:39–4910.1016/j.carbpol.2019.02.067 ↗
11. Fan S, Zhou J, Zhang Y, Feng Z, Hu H, Huang Z, Qin Y (2020) Preparation of sugarcane bagasse succinate/alginate porous gel beads via a self-assembly strategy: improving the structural stability and adsorption efficiency for heavy metal ions. Bioresource Technol 306:12312810.1016/j.biortech.2020.123128 ↗
12. Fu W, Huang Z (2018) Magnetic dithiocarbamate functionalized reduced graphene oxide for the removal of Cu(II), Cd(II), Pb(II), and Hg(II) ions from aqueous solution: synthesis, adsorption, and regeneration. Chemosphere 209:449–45610.1016/j.chemosphere.2018.06.087 ↗
13. Gad YH, Ali HE, Hegazy E-SA (2021) Radiation-induced improving mechanical and thermal properties of carboxymethyl cellulose/clay composite for application in removal of copper(II) ions from wastewater. J Inorg Organomet Polym Mater 31:2083–209410.1007/s10904-020-01850-w ↗
14. Ge Y-L et al (2019) Enhanced adsorption and catalytic degradation of organic dyes by nanometer iron oxide anchored to single-wall carbon nanotubes. Appl Surf Sci 488:813–82610.1016/j.apsusc.2019.05.221 ↗
15. Godiya CB, Cheng X, Li D, Chen Z, Lu X (2019) Carboxymethyl cellulose/polyacrylamide composite hydrogel for cascaded treatment/reuse of heavy metal ions in wastewater. J Hazard Mater 364:28–3810.1016/j.jhazmat.2018.09.076 ↗
16. Hong TT, Okabe H, Hidaka Y, Omondi BA, Hara K (2019) Radiation induced modified CMC-based hydrogel with enhanced reusability for heavy metal ions adsorption. Polymer 181:12177210.1016/j.polymer.2019.121772 ↗
17. Huang Q et al (2017) Facile preparation of MoS2 based polymer composites via mussel inspired chemistry and their high efficiency for removal of organic dyes. Appl Surf Sci 419:35–4410.1016/j.apsusc.2017.05.006 ↗
18. Huang D, Xu B, Wu J, Brookes PC, Xu J (2019) Adsorption and desorption of phenanthrene by magnetic graphene nanomaterials from water: roles of pH, heavy metal ions and natural organic matter. Chem Eng J 368:390–39910.1016/j.cej.2019.02.152 ↗
19. Jiang C, Wang X, Qin D, Da W, Hou B, Hao C, Wu J (2019a) Construction of magnetic lignin-based adsorbent and its adsorption properties for dyes. J Hazard Mater 369:50–6110.1016/j.jhazmat.2019.02.021 ↗
20. Jiang C, Wang X, Wang G, Hao C, Li X, Li T (2019b) Adsorption performance of a polysaccharide composite hydrogel based on crosslinked glucan/chitosan for heavy metal ions. Compos Part B Eng 169:45–5410.1016/j.compositesb.2019.03.082 ↗
21. Jiang C, Wang X, Hou B, Hao C, Li X, Wu J (2020) Construction of a lignosulfonate-lysine hydrogel for the adsorption of heavy metal ions. J Agric Food Chem 68:3050–306010.1021/acs.jafc.9b07540 ↗
22. Kong Q, Preis S, Li L, Luo P, Hu Y, Wei C (2020) Graphene oxide-terminated hyperbranched amino polymer-carboxymethyl cellulose ternary nanocomposite for efficient removal of heavy metals from aqueous solutions. Int J Biol Macromol 149:581–59210.1016/j.ijbiomac.2020.01.185 ↗
23. Li G, Hao H, Zhuang Y, Wang Z, Shi B (2019) Powdered activated carbon enhanced Manganese(II) removal by chlorine oxidation. Water Res 156:287–29610.1016/j.watres.2019.03.027 ↗
24. Lin X, Jin J, Guo X, Jia X (2021) All-carboxymethyl cellulose sponges for removal of heavy metal ions. Cellulose 28:3113–312210.1007/s10570-021-03685-1 ↗
25. Liu J, Su D, Yao J, Huang Y, Shao Z, Chen X (2017) Soy protein-based polyethylenimine hydrogel and its high selectivity for copper ion removal in wastewater treatment. J Mater Chem A 5:4163–417110.1039/C6TA10814H ↗
26. Lu S et al (2019) An adsorbent based on humic acid and carboxymethyl cellulose for efficient dye removal from aqueous solution. Int J Biol Macromol 135:790–79710.1016/j.ijbiomac.2019.05.095 ↗
27. Ma J et al (2018) Pb(II), Cu(II) and Cd(II) removal using a humic substance-based double network hydrogel in individual and multicomponent systems. J Mater Chem A 6:20110–2012010.1039/C8TA07250G ↗
28. Manzoor K, Ahmad M, Ahmad S, Ikram S (2019) Synthesis, characterization, kinetics, and thermodynamics of EDTA-modified chitosan-carboxymethyl cellulose as Cu(II) ion adsorbent. ACS Omega 4:17425–1743710.1021/acsomega.9b02214 ↗
29. Ngambia A et al (2019) Adsorptive purification of heavy metal contaminated wastewater with sewage sludge derived carbon-supported Mg(II) composite. Sci Total Environ 691:306–32110.1016/j.scitotenv.2019.07.003 ↗
30. Pan J, Gao Y, Gao B, Guo K, Xu X, Yue Q (2019) One-step synthesis of easily-recoverable carboxylated biogas residues for efficient removal of heavy metal ions from synthetic wastewater. J Clean Prod 240:11826410.1016/j.jclepro.2019.118264 ↗
31. Pu S et al (2018) In situ coprecipitation formed highly water-dispersible magnetic chitosan nanopowder for removal of heavy metals and its adsorption mechanism. ACS Sustain Chem Eng 6:16754–1676510.1021/acssuschemeng.8b04028 ↗
32. Qi X et al (2019) Efficient decontamination of lead ions from wastewater by salecan polysaccharide-based hydrogels. ACS Sustain Chem Eng 7:11014–1102310.1021/acssuschemeng.9b02139 ↗
33. Qin F et al (2019) Efficient removal of Cu(2+) in water by carboxymethylated cellulose nanofibrils: performance and mechanism. Biomacromol 20:4466–447510.1021/acs.biomac.9b01198 ↗
34. Saeed M, Munir M, Nafees M, Shah SSA, Ullah H, Waseem A (2020) Synthesis, characterization and applications of silylation based grafted bentonites for the removal of Sudan dyes: isothermal, kinetic and thermodynamic studies. Micropor Mesopor Mat 291:10969710.1016/j.micromeso.2019.109697 ↗
35. Song L, Liu F, Zhu C, Li A (2019) Facile one-step fabrication of carboxymethyl cellulose based hydrogel for highly efficient removal of Cr(VI) under mild acidic condition. Chem Eng J 369:641–65110.1016/j.cej.2019.03.126 ↗
36. Wang B, Xia J, Mei L, Wang L, Zhang Q (2017) Highly efficient and rapid lead(II) scavenging by the natural artemia cyst shell with unique three-dimensional porous structure and strong sorption affinity. ACS Sustain Chem Eng 6:1343–135110.1021/acssuschemeng.7b03667 ↗
37. Wang X, Wang Y, He S, Hou H, Hao C (2018a) Ultrasonic-assisted synthesis of superabsorbent hydrogels based on sodium lignosulfonate and their adsorption properties for Ni(2+). Ultrason Sonochem 40:221–22910.1016/j.ultsonch.2017.07.011 ↗
38. Wang Y, Zhu L, Wang X, Zheng W, Hao C, Jiang C, Wu J (2018b) Synthesis of aminated calcium lignosulfonate and its adsorption properties for azo dyes. J Ind Eng Chem 61:321–33010.1016/j.jiec.2017.12.030 ↗
39. Wang H et al (2020) Functional group-rich hyperbranched magnetic material for simultaneous efficient removal of heavy metal ions from aqueous solution. J Hazard Mater 384:12128810.1016/j.jhazmat.2019.121288 ↗
40. Wu Z, Zhang H, Luo L, Tu W (2019) ZnCo binary hydroxide nanostructures for the efficient removal of cationic dyes. J Alloys Compd 806:823–83210.1016/j.jallcom.2019.07.295 ↗
41. Xia L, Lu Y, Meng H, Li C (2020) Preparation of C-MOx nanocomposite for efficient adsorption of heavy metal ions via mechanochemical reaction of CaC2 and transitional metal oxides. J Hazard Mater 393:12248710.1016/j.jhazmat.2020.122487 ↗
42. Xiao D, Ding W, Zhang J, Ge Y, Wu Z, Li Z (2019) Fabrication of a versatile lignin-based nano-trap for heavy metal ion capture and bacterial inhibition. Chem Eng J 358:310–32010.1016/j.cej.2018.10.037 ↗
43. Yang J et al (2019a) High-strength physically multi-cross-linked chitosan hydrogels and aerogels for removing heavy-metal ions. J Agric Food Chem 67:13648–1365710.1021/acs.jafc.9b05063 ↗
44. Yang X et al (2019b) Surface functional groups of carbon-based adsorbents and their roles in the removal of heavy metals from aqueous solutions: a critical review. Chem Eng J 366:608–62110.1016/j.cej.2019.02.119 ↗
45. Yu S et al (2018) Rational design of carbonaceous nanofiber/Ni-Al layered double hydroxide nanocomposites for high-efficiency removal of heavy metals from aqueous solutions. Environ Pollut 242:1–1110.1016/j.envpol.2018.06.031 ↗
46. Zare EN, Motahari A, Sillanpää M (2018) Nanoadsorbents based on conducting polymer nanocomposites with main focus on polyaniline and its derivatives for removal of heavy metal ions/dyes: a review. Environ Res 162:173–19510.1016/j.envres.2017.12.025 ↗
47. Zhan W, Gao L, Fu X, Siyal SH, Sui G, Yang X (2019) Green synthesis of amino-functionalized carbon nanotube-graphene hybrid aerogels for high performance heavy metal ions removal. Appl Surf Sci 467–468:1122–113310.1016/j.apsusc.2018.10.248 ↗
48. Zhang D, Wang C, Bao Q, Zheng J, Deng D, Duan Y, Shen L (2018) The physicochemical characterization, equilibrium, and kinetics of heavy metal ions adsorption from aqueous solution by arrowhead plant (Sagittaria trifoliaL.) stalk. J Food Biochem 42:e1244810.1111/jfbc.12448 ↗
49. Zhang L, Tang S, He F, Liu Y, Mao W, Guan Y (2019) Highly efficient and selective capture of heavy metals by poly(acrylic acid) grafted chitosan and biochar composite for wastewater treatment. Chem Eng J 378:12221510.1016/j.cej.2019.122215 ↗
50. Zhang S, Liu C, Yuan Y, Fan M, Zhang D, Wang D, Xu Y (2020) Selective, highly efficient extraction of Cr(III), Pb(II) and Fe(III) from complex water environment with a tea residue derived porous gel adsorbent. Bioresour Technol 311:12352010.1016/j.biortech.2020.123520 ↗
51. Zhou Y, Hu Y, Huang W, Cheng G, Cui C, Lu J (2018) A novel amphoteric β-cyclodextrin-based adsorbent for simultaneous removal of cationic/anionic dyes and bisphenol A. Chem Eng J 341:47–5710.1016/j.cej.2018.01.155 ↗
52. Zhou H, Zhu H, Xue F, He H, Wang S (2020) Cellulose-based amphoteric adsorbent for the complete removal of low-level heavy metal ions via a specialization and cooperation mechanism. Chem Eng J 385:12387910.1016/j.cej.2019.123879 ↗
53. Zirak M, Abdollahiyan A, Eftekhari-Sis B, Saraei M (2017) Carboxymethyl cellulose coated Fe3O4@SiO2 core–shell magnetic nanoparticles for methylene blue removal: equilibrium, kinetic, and thermodynamic studies. Cellulose 25:503–51510.1007/s10570-017-1590-5 ↗