One-pot preparation of hydrophobic cellulose nanocrystals in an ionic liquid
Source abstract
Abstract
The facile one-pot preparation of hydrophobic cellulose nanocrystals (CNCs) from wood pulpboard in an ionic liquid is reported in the present paper. This process employed a so-called amorphous cellulose solvent system capable of dissolving the majority of the amorphous regions in cellulose while maintaining the crystalline domains essentially intact, and consisting of tetrabutylammonium acetate with dimethylacetamide. These solvents were mixed at a mass ratio of 1:9 in conjunction with acetic anhydride to prepare CNCs via surface acetylation. The rod-like morphology and nanometer-scale dimensions of the resulting CNCs were ascertained by atomic force microscopy and transmission electron microscopy. Successful surface acetylation while maintaining an intact crystalline core was confirmed by Fourier transform infrared, 13C CP/MAS NMR and X-ray photoelectron spectroscopy in addition to X-ray diffraction. Finally, the thermal stability and hydrophobic behavior of the hydrophobic CNCs were characterized using thermal gravimetric analysis and water contact-angle measurements, respectively.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Cellulose Research Studies · Lignin and Wood Chemistry · Nanocomposite Films for Food Packaging
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (29)
Show source-provided references
1. Adebajo MO, Frost RL, Kloprogge JT, Kokot S (2006) Raman spectroscopic investigation of acetylation of raw cotton. Spectrochim Acta A Mol Biomol Spectrosc 64:448–45310.1016/j.saa.2005.07.045 ↗
2. Andresen M, Johansson L-S, Tanem BS, Stenius P (2006) Properties and characterization of hydrophobized microfibrillated cellulose. Cellulose 13:665–67710.1007/s10570-006-9072-1 ↗
3. Braun B, Dorgan JR (2008) Single-step method for the isolation and surface functionalization of cellulosic nanowhiskers. Biomacromolecules 10:334–34110.1021/bm8011117 ↗
4. Buchanan CM, Edgar KJ, Hyatt JA, Wilson AK (1991) Preparation of cellulose [1-carbon-13] acetates and determination of monomer composition by NMR spectroscopy. Macromolecules 24:3050–305910.1021/ma00011a004 ↗
5. Cetin NS, Tingaut P, Özmen N, Henry N, Harper D, Dadmun M, Sèbe G (2009) Acetylation of cellulose nanowhiskers with vinyl acetate under moderate conditions. Macromol Biosci 9:997–100310.1002/mabi.200900073 ↗
6. Chen L, Wang Q, Hirth K, Baez C, Agarwal UP, Zhu J (2015) Tailoring the yield and characteristics of wood cellulose nanocrystals (CNC) using concentrated acid hydrolysis. Cellulose 22:1753–176210.1007/s10570-015-0615-1 ↗
7. Elazzouzi-Hafraoui S, Nishiyama Y, Putaux J-L, Heux L, Dubreuil F, Rochas C (2007) The shape and size distribution of crystalline nanoparticles prepared by acid hydrolysis of native cellulose. Biomacromolecules 9:57–6510.1021/bm700769p ↗
8. Espino-Pérez E, Domenek S, Belgacem N, Sillard C, Bras J (2014) Green process for chemical functionalization of nanocellulose with carboxylic acids. Biomacromolecules 15:4551–456010.1021/bm5013458 ↗
9. French AD (2014) Idealized powder diffraction patterns for cellulose polymorphs. Cellulose 21:885–89610.1007/s10570-013-0030-4 ↗
10. Habibi Y (2014) Key advances in the chemical modification of nanocelluloses. Chem Soc Rev 43:1519–154210.1039/C3CS60204D ↗
11. Habibi Y, Lucia LA, Rojas OJ (2010) Cellulose nanocrystals: chemistry, self-assembly, and applications. Chem Rev 110:3479–350010.1021/cr900339w ↗
12. Ifuku S, Nogi M, Abe K, Handa K, Nakatsubo F, Yano H (2007) Surface modification of bacterial cellulose nanofibers for property enhancement of optically transparent composites: dependence on acetyl-group DS. Biomacromolecules 8:1973–197810.1021/bm070113b ↗
13. Jonoobi M, Niska KO, Harun J, Misra M (2009) Chemical composition, crystallinity, and thermal degradation of bleached and unbleached kenaf bast (Hibiscus cannabinus) pulp and nanofibers. BioResources 4:626–63910.15376/biores.4.2.626-639 ↗
14. Jonoobi M, Harun J, Mathew AP, Hussein MZB, Oksman K (2010) Preparation of cellulose nanofibers with hydrophobic surface characteristics. Cellulose 17:299–30710.1007/s10570-009-9387-9 ↗
15. Kim D-Y, Nishiyama Y, Kuga S (2002) Surface acetylation of bacterial cellulose. Cellulose 9:361–36710.1023/A:1021140726936 ↗
16. Klemm D, Kramer F, Moritz S, Lindström T, Ankerfors M, Gray D, Dorris A (2011) Nanocelluloses: a new family of nature-based materials. Angew Chem Int Ed Engl 50:5438–546610.1002/anie.201001273 ↗
17. Miao J, Sun H, Yu Y, Song X, Zhang L (2014) Quaternary ammonium acetate: an efficient ionic liquid for the dissolution and regeneration of cellulose. RSC Adv 4:36721–3672410.1039/C4RA06258B ↗
18. Missoum K, Belgacem MN, Barnes J-P, Brochier-Salon M-C, Bras J (2012) Nanofibrillated cellulose surface grafting in ionic liquid. Soft Matter 8:8338–834910.1039/c2sm25691f ↗
19. Moon RJ, Martini A, Nairn J, Simonsen J, Youngblood J (2011) Cellulose nanomaterials review: structure, properties and nanocomposites. Chem Soc Rev 40:3941–399410.1039/c0cs00108b ↗
20. Salajková M, Berglund LA, Zhou Q (2012) Hydrophobic cellulose nanocrystals modified with quaternary ammonium salts. J Mater Chem 22:19798–1980510.1039/c2jm34355j ↗
21. Samir MASA, Alloin F, Sanchez J-Y, Dufresne A (2005) Nanocomposite polymer electrolytes based on poly (oxyethylene) and cellulose whiskers. Polímeros 15:109–11310.1590/S0104-14282005000200009 ↗
22. Sassi J-F, Chanzy H (1995) Ultrastructural aspects of the acetylation of cellulose. Cellulose 2:111–12710.1007/BF00816384 ↗
23. Siqueira G, Bras J, Dufresne A (2010) Cellulosic bionanocomposites: a review of preparation, properties and applications. Polymers 2:728–76510.3390/polym2040728 ↗
24. Sun XF, Sun R (2002) Comparative study of acetylation of rice straw fiber with or without catalysts. Wood Fiber Sci 34:306–317
25. Tserki V, Zafeiropoulos N, Simon F, Panayiotou C (2005) A study of the effect of acetylation and propionylation surface treatments on natural fibres. Compos A 36:1110–111810.1016/j.compositesa.2005.01.004 ↗
26. Xiang Q, Lee Y, Pettersson PO, Torget RW (2003) Heterogeneous aspects of acid hydrolysis of α-cellulose. In: Biotechnology for fuels and chemicals. Springer, pp 505–51410.1007/978-1-4612-0057-4_42 ↗
27. Zafeiropoulos N, Baillie C (2007) A study of the effect of surface treatments on the tensile strength of flax fibres—part II: application of Weibull statistics. Compos A 38:629–63810.1016/j.compositesa.2006.02.005 ↗
28. Zhang H, Wu J, Zhang J, He J (2005) 1-Allyl-3-methylimidazolium chloride room temperature ionic liquid: a new and powerful nonderivatizing solvent for cellulose. Macromolecules 38:8272–827710.1021/ma0505676 ↗
29. Zhao Y, Liu X, Wang J, Zhang S (2013) Insight into the cosolvent effect of cellulose dissolution in imidazolium-based ionic liquid systems. J Phys Chem B 117:9042–904910.1021/jp4038039 ↗