journal article·2022-10-12Open access

Assessment of the Anti-Thrombogenic Activity of Polyurethane Starch Composites

Jhoan F. Cespedes, Said Arévalo-Alquichire, Luis E. Diaz, Manuel F. Valero

Abstract

The increasing morbidity and mortality of patients due to post-surgery complications of coronary artery bypass grafts (CABPG) are related to blood–material interactions. Thus, the characterization of the thrombogenicity of the biomaterial for cardiovascular devices is of particular interest. This research evaluated the anti-thrombogenic activity of polyurethanes–starch composites. We previously synthesized polyurethane matrices that were obtained from polycaprolactone diol (PCL), polyethylene glycol (PEG), pentaerythritol (PE), and isophorone diisocyanate (IPDI). In addition, potato starch (AL-N) and zwitterionic starch (AL-Z) were added as fillers. The anti-thrombogenic property was characterized by the clot formation time, platelet adhesion, protein absorption, TAT complex levels, and hemolysis. Additionally, we evaluated the cell viability of the endothelial and smooth muscle cells. Statically significant differences among the polyurethane matrices (P1, P2, and P3) were found for protein absorption and the blood clotting time without fillers. The polyurethanes composites with AL-Z presented an improvement in the anti-thrombogenic property. On the other hand, the composites with AL-Z reduced the viability of the endothelial cells and did not significantly affect the AoSCM (except for P1, which increased). These results classify these biomaterials as inert; therefore, they can be used for cardiovascular applications.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Electrospun Nanofibers in Biomedical Applications · biodegradable polymer synthesis and properties · Polymer Surface Interaction Studies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Energy, Materials and Environmental Group, GEMA, Faculty of Engineering, Universidad de La Sabana, Chía 140013, Colombia

Master Program in Design and Management Process, Faculty of Engineering, Universidad de La Sabana, Chía 140013, Colombia

Department of Ophthalmology, Schepens Eye Research Institute of Mass Eye and Ear, Harvard Medical School, Boston, MA 02114, USA

Bioprospecting Research Group, GIBP, Faculty of Engineering, Universidad de La Sabana, Chía 140013, Colombia

Funding

Universidad de La Sabana · Minister of Science, Technology, and Innovation of the Republic of Colombia

References (43)

Show source-provided references
1. Cardiovascular tissue banking activity during SARS-CoV-2 pandemic: Evolution of national protocols and Lombardy experience10.1007/s10561-021-09959-z ↗
2. Situación actual de los bancos de tejidos en Colombia: Tejido cardiovascular
3. Considerations in the Development of Small-Diameter Vascular Graft as an Alternative for Bypass and Reconstructive Surgeries: A Review10.1007/s13239-020-00482-y ↗
4. Coronary artery bypass graft surgery complications: A review for emergency clinicians10.1016/j.ajem.2018.09.014 ↗
5. Advances in the development of hemostatic biomaterials for medical application10.1186/s40824-021-00239-1 ↗
6. Selected aspects of the state of the art in biomaterials for cardiovascular applications10.1016/j.colsurfb.2020.110986 ↗
7. Thrombogenic and Inflammatory Reactions to Biomaterials in Medical Devices10.3389/fbioe.2020.00123 ↗
8. Horbett, T.A. (2013). Adsorbed Proteins on Biomaterials. Biomaterials Science, Academic Press. [3rd ed.].10.1016/B978-0-08-087780-8.00036-X ↗
9. Hanson, S.R., and Tucker, E.I. (2013). Blood Coagulation and Blood—Materials Interactions. Biomaterials Science, Academic Press. [3rd ed.].10.1016/B978-0-08-087780-8.00048-6 ↗
10. Anderson, J.M. (2013). Inflammation, Wound Healing, and the Foreign-Body Response. Biomaterials Science, Academic Press. [3rd ed.].10.1016/B978-0-08-087780-8.00044-9 ↗
11. Anti-thrombotic technologies for medical devices10.1016/j.addr.2016.07.008 ↗
12. Polyurethanes in cardiovascular prosthetics10.1007/s00289-017-2266-x ↗
13. Roth, Y., and Lewitus, D.Y. (2020). The grafting of multifunctional antithrombogenic chemical networks on polyurethane intravascular catheters. Polymers, 12.10.3390/polym12051131 ↗
14. Enhancing anti-thrombogenicity of biodegradable polyurethanes through drug molecule incorporation10.1039/C8TB01582A ↗
15. Nonthrombogenic, biodegradable elastomeric polyurethanes with variable sulfobetaine content10.1021/am506998s ↗
16. Synthesis of Thermoplastic Poly(2-methoxyethyl acrylate)-Based Polyurethane by RAFT and Condensation Polymerization10.1002/marc.202000346 ↗
17. Sulfonate Groups and Saccharides as Essential Structural Elements in Heparin-Mimicking Polymers Used as Surface Modifiers: Optimization of Relative Contents for Antithrombogenic Properties10.1021/acsami.7b16723 ↗
18. Zwitterionic modification of polyurethane membranes for enhancing the anti-fouling property10.1016/j.jcis.2016.07.005 ↗
19. Effect of the incorporation of chitosan on the physico-chemical, mechanical properties and biological activity on a mixture of polycaprolactone and polyurethanes obtained from castor oil10.1177/0885328216664448 ↗
20. A silver nanocomposite biomaterial for blood-contacting implants10.1002/jbm.a.34177 ↗
21. Zwitterionic polymers and hydrogels for antibiofouling applications in implantable devices10.1016/j.mattod.2020.03.024 ↗
22. Ionic starch-based hydrogels for the prevention of nonspecific protein adsorption10.1016/j.carbpol.2014.09.077 ↗
23. Arévalo-Alquichire, S., Morales-Gonzalez, M., Diaz, L.E., and Valero, M.F. (2018). Surface response methodology-based mixture design to study the influence of polyol blend composition on polyurethanes’ properties. Molecules, 23.10.20944/preprints201807.0012.v1 ↗
24. Arévalo-Alquichire, S., Morales-Gonzalez, M., Navas-Gómez, K., Diaz, L.E., Gómez-Tejedor, J.A., Serrano, M.-A., and Valero, M.F. (2020). Influence of polyol/crosslinker blend composition on phase separation and thermo-mechanical properties of polyurethane thin films. Polymers, 12.10.3390/polym12030666 ↗
25. Hydrolytic stability and biocompatibility on smooth muscle cells of polyethylene glycol-polycaprolactone-based polyurethanes10.1557/jmr.2020.303 ↗
26. Cespedes, J.F., Arévalo-Alquichire, S., Diaz, L.E., and Valero, M.F. (2022). Influence of Starch on the Structure-Properties Relationship in Polyethylene Glycol/Polycaprolactone Diol Polyurethanes. Polymers, 14.10.3390/polym14153184 ↗
27. Gaaz, T.S., Sulong, A.B., Ansari, M.N.M., Kadhum, A.A.H., Al-Amiery, A.A., and Nassir, M.H. (2017). Effect of starch loading on the thermo-mechanical and morphological properties of polyurethane composites. Materials, 10.10.3390/ma10070777 ↗
28. Electrospun biodegradable elastic polyurethane scaffolds with dipyridamole release for small diameter vascular grafts10.1016/j.actbio.2014.07.031 ↗
29. Tunable Elastomers with an Antithrombotic Component for Cardiovascular Applications10.1002/adhm.201800222 ↗
30. A facile heparin/carboxymethyl chitosan coating mediated by polydopamine on implants for hemocompatibility and antibacterial properties10.1016/j.apsusc.2020.146539 ↗
31. Crosslinked urethane doped polyester biphasic scaffolds: Potential for in vivo vascular tissue engineering10.1002/jbm.a.32846 ↗
32. Surface modification and endothelialization of polyurethane for vascular tissue engineering applications: A review10.1039/C6BM00618C ↗
33. Ameliorating properties of castor oil based polyurethane hybrid nanocomposites via synergistic addition of graphene and cellulose nanofibers10.1016/j.jiec.2022.02.035 ↗
34. The blood compatibility challenge. Part 2: Protein adsorption phenomena governing blood reactivity10.1016/j.actbio.2019.06.022 ↗
35. In Vitro Thrombogenicity Testing of Biomaterials10.1002/adhm.201900527 ↗
36. Thromboresistance of Polyurethane Plates Modified with Quaternized Chitosan and Heparin10.1134/S0003683822020041 ↗
37. Enhanced hemocompatibility of a PEGilated polycarbonate based segmented polyurethane10.1080/00914037.2020.1857760 ↗
38. A multi-in-one strategy with glucose-triggered long-term antithrombogenicity and sequentially enhanced endothelialization for biological valve leaflets10.1016/j.biomaterials.2021.120981 ↗
39. Steric and electrostatic surface forces on sulfonated PEG graft surfaces with selective albumin adsorption10.1016/j.colsurfb.2013.01.052 ↗
40. Surface properties and blood compatibility of commercially available diamond-like carbon coatings for cardiovascular devices10.1002/jbm.b.31291 ↗
41. Effect of albumin coating on the in vitro blood compatibility of Dacron® arterial prostheses10.1016/0142-9612(89)90017-3 ↗
42. Mishra, V., and Heath, R.J. (2021). Structural and biochemical features of human serum albumin essential for eukaryotic cell culture. Int. J. Mol. Sci., 22.10.3390/ijms22168411 ↗
43. Ratner, B.D., Hoffman, A.S., Schoen, F.J., and Lemons, J.E. (2013). Chapter II.1.3—Cells and Surfaces in vitro. Biomaterials Science, Academic Press. [3rd ed.].10.1016/B978-0-08-087780-8.00151-0 ↗