journal article·2024-07-31Open access

In Vitro Biocompatibility Assessment of Bioengineered PLA-Hydrogel Core–Shell Scaffolds with Mesenchymal Stromal Cells for Bone Regeneration

Federica Re, Luciana Sartore, Chiara Pasini, Matteo Ferroni, Elisa Borsani, Stefano Pandini, Andrea Bianchetti, Camillo Almici, Lorena Giugno, Roberto Bresciani, Silvia Mutti, Federica Trenta, Simona Bernardi, Mirko Farina, Domenico Russo

Abstract

Human mesenchymal stromal cells (hMSCs), whether used alone or together with three-dimensional scaffolds, are the best-studied postnatal stem cells in regenerative medicine. In this study, innovative composite scaffolds consisting of a core–shell architecture were seeded with bone-marrow-derived hMSCs (BM-hMSCs) and tested for their biocompatibility and remarkable capacity to promote and support bone regeneration and mineralization. The scaffolds were prepared by grafting three different amounts of gelatin–chitosan (CH) hydrogel into a 3D-printed polylactic acid (PLA) core (PLA-CH), and the mechanical and degradation properties were analyzed. The BM-hMSCs were cultured in the scaffolds with the presence of growth medium (GM) or osteogenic medium (OM) with differentiation stimuli in combination with fetal bovine serum (FBS) or human platelet lysate (hPL). The primary objective was to determine the viability, proliferation, morphology, and spreading capacity of BM-hMSCs within the scaffolds, thereby confirming their biocompatibility. Secondly, the BM-hMSCs were shown to differentiate into osteoblasts and to facilitate scaffold mineralization. This was evinced by a positive Von Kossa result, the modulation of differentiation markers (osteocalcin and osteopontin), an expression of a marker of extracellular matrix remodeling (bone morphogenetic protein-2), and collagen I. The results of the energy-dispersive X-ray analysis (EDS) clearly demonstrate the presence of calcium and phosphorus in the samples that were incubated in OM, in the presence of FBS and hPL, but not in GM. The chemical distribution maps of calcium and phosphorus indicate that these elements are co-localized in the same areas of the sections, demonstrating the formation of hydroxyapatite. In conclusion, our findings show that the combination of BM-hMSCs and PLA-CH, regardless of the amount of hydrogel content, in the presence of differentiation stimuli, can provide a construct with enhanced osteogenicity for clinically relevant bone regeneration.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Mesenchymal stem cell research · Bone Tissue Engineering Materials · Periodontal Regeneration and Treatments

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Unit of Blood Diseases and Cell Therapies, Department of Clinical and Experimental Sciences, University of Brescia, “ASST-Spedali Civili” Hospital of Brescia, 25123 Brescia, Italy

Centro di Ricerca Emato-Oncologica AIL (CREA), ASST Spedali Civili, 25123 Brescia, Italy

University Center of Research “STem cells, bioENgineering and regenerative MEDicine”—STENMED, University of Brescia, 25123 Brescia, Italy

Materials Science and Technology Laboratory, Department of Mechanical and Industrial Engineering, University of Brescia, 25123 Brescia, Italy

Department of Civil, Environmental, Architectural Engineering and Mathematics (DICATAM), University of Brescia, Via Valotti 9, 25123 Brescia, Italy

National Research Council (CNR)—Institute for Microelectronics and Microsystems, Via Gobetti 101, 40129 Bologna, Italy

Division of Anatomy and Physiopathology, Department of Clinical and Experimental Sciences, University of Brescia, 25123 Brescia, Italy

Interdepartmental University Center of Research “Adaption and Regeneration of Tissues and Organs (ARTO)”, University of Brescia, 25123 Brescia, Italy

Laboratory for Stem Cells Manipulation and Cryopreservation, Department of Transfusion Medicine, ASST Spedali Civili di Brescia, 25123 Brescia, Italy

Department of Molecular and Translational Medicine, University of Brescia, 25123 Brescia, Italy

Highly Specialized Laboratory, ASST Spedali Civili di Brescia, 25123 Brescia, Italy

National Center for Gene Therapy and Drugs based on RNA Technology—CN3, 35122 Padua, Italy

Funding

University of Brescia “Health & Wealth” · Fondazione Comunità Bresciana

References (68)

Show source-provided references
1. Current Understanding of Epidemiology, Pathophysiology, and Management of Atypical Femur Fractures10.1007/s11914-018-0464-6 ↗
2. Di Pietro, L., Palmieri, V., Papi, M., and Lattanzi, W. (2022). Translating Material Science into Bone Regenerative Medicine Applications: State-of-The Art Methods and Protocols. Int. J. Mol. Sci., 23.10.3390/ijms23169493 ↗
3. Review on Porous Scaffolds Generation Process: A Tissue Engineering Approach10.1021/acsabm.2c00740 ↗
4. Re, F., Borsani, E., Rezzani, R., Sartore, L., and Russo, D. (2023). Bone Regeneration Using Mesenchymal Stromal Cells and Biocompatible Scaffolds: A Concise Review of the Current Clinical Trials. Gels, 9.10.3390/gels9050389 ↗
5. Definition and Characteristics of Mesenchymal Stromal Cells in Preclinical and Clinical Studies: A Scoping Review10.1093/stcltm/szab009 ↗
6. Identification of mesenchymal stem/progenitor cells in human first-trimester fetal blood, liver, and bone marrow10.1182/blood.V98.8.2396 ↗
7. Minimal criteria for defining multipotent mesenchymal stromal cells. The International Society for Cellular Therapy position statement10.1080/14653240600855905 ↗
8. Postnatal human dental pulp stem cells (DPSCs) in vitro and in vivo10.1073/pnas.240309797 ↗
9. Investigation of multipotent postnatal stem cells from human periodontal ligament10.1016/S0140-6736(04)16627-0 ↗
10. Advances in regenerative therapy: A review of the literature and future directions10.1016/j.reth.2020.01.004 ↗
11. Early efficacy evaluation of mesenchymal stromal cells (MSC) combined to biomaterials to treat long bone non-unions10.1016/j.injury.2020.02.070 ↗
12. Randomized clinical study of injectable dextrin-based hydrogel as a carrier of a synthetic bone substitute10.1007/s00784-023-04868-9 ↗
13. Manzini, B.M., Machado, L.M.R., Noritomi, P.Y., and DA Silva, J.V.L. (2021). Advances in Bone tissue engineering: A fundamental review. J. Biosci., 46.10.1007/s12038-020-00122-6 ↗
14. Bone marrow mesenchymal stem cells: Aging and tissue engineering applications to enhance bone healing10.1016/j.biomaterials.2018.06.026 ↗
15. Strategies for MSC expansion and MSC-based microtissue for bone regeneration10.1016/j.biomaterials.2017.11.023 ↗
16. Mesenchymal stem cell-based therapy of osteoarthritis: Current knowledge and future perspectives10.1016/j.biopha.2018.11.099 ↗
17. Stem cell research and clinical development in tendon repair
18. Mesenchymal stem cells and immunomodulation: Current status and future prospects10.1038/cddis.2015.327 ↗
19. Re, F., Gabusi, E., Manferdini, C., Russo, D., and Lisignoli, G. (2021). Bone Regeneration Improves with Mesenchymal Stem Cell Derived Extracellular Vesicles (EVs) Combined with Scaffolds: A Systematic Review. Biology, 10.10.3390/biology10070579 ↗
20. Han, Y., Li, X., Zhang, Y., Chang, F., and Ding, J. (2019). Mesenchymal Stem Cells for Regenerative Medicine. Cells, 8.10.3390/cells8080886 ↗
21. Alternatives to the use of fetal bovine serum: Human platelet lysates as a serum substitute in cell culture media
22. 3D gelatin-chitosan hybrid hydrogels combined with human platelet lysate highly support human mesenchymal stem cell proliferation and osteogenic differentiation10.1177/2041731419845852 ↗
23. Mesenchymal stem cell-based nanoparticles and scaffolds in regenerative medicine10.1016/j.ejphar.2021.174657 ↗
24. Scaffolds for Bone Tissue Engineering: State of the art and new perspectives10.1016/j.msec.2017.05.017 ↗
25. Scaffolds and coatings for bone regeneration10.1007/s10856-020-06364-y ↗
26. Oxygen vacancy boosting Fenton reaction in bone scaffold towards fighting bacterial infection10.1088/2631-7990/ad01fd ↗
27. Three-dimensional (3D) printed scaffold and material selection for bone repair10.1016/j.actbio.2018.11.039 ↗
28. Re, F., Sartore, L., Borsani, E., Ferroni, M., Baratto, C., Mahajneh, A., Smith, A., Dey, K., Almici, C., and Guizzi, P. (2021). Mineralization of 3D Osteogenic Model Based on Gelatin-Dextran Hybrid Hydrogel Scaffold Bioengineered with Mesenchymal Stromal Cells: A Multiparametric Evaluation. Materials, 14.10.3390/ma14143852 ↗
29. Li, P., Fu, L., Liao, Z., Peng, Y., Ning, C., Gao, C., Zhang, D., Sui, X., Lin, Y., and Liu, S. (2021). Chitosan hydrogel/3D-printed poly(ε-caprolactone) hybrid scaffold containing synovial mesenchymal stem cells for cartilage regeneration based on tetrahedral framework nucleic acid recruitment. Biomaterials, 278.10.1016/j.biomaterials.2021.121131 ↗
30. Bharadwaz, A., and Jayasuriya, A.C. (2020). Recent trends in the application of widely used natural and synthetic polymer nanocomposites in bone tissue regeneration. Mater. Sci. Eng. C Mater. Biol. Appl., 110.10.1016/j.msec.2020.110698 ↗
31. Hybrid polymer biomaterials for bone tissue regeneration10.1007/s11684-018-0664-6 ↗
32. Bone substitutes: A review of their characteristics, clinical use, and perspectives for large bone defects management10.1177/2041731418776819 ↗
33. De Leon-Oliva, D., Boaru, D.L., Perez-Exposito, R.E., Fraile-Martinez, O., García-Montero, C., Diaz, R., Bujan, J., García-Honduvilla, N., Lopez-Gonzalez, L., and Álvarez-Mon, M. (2023). Advanced Hydrogel-Based Strategies for Enhanced Bone and Cartilage Regeneration: A Comprehensive Review. Gels, 9.10.3390/gels9110885 ↗
34. Zhang, C., Shi, T., Wu, D., Hu, D., Li, W., Fei, J., and Liu, W. (2023). The application of 3D-printed hydrogels in bone tissue engineering. Tissue Eng. Part. B Rev.10.1089/ten.teb.2023.0218 ↗
35. Chitosan-based scaffold counteracts hypertrophic and fibrotic markers in chondrogenic differentiated mesenchymal stromal cells10.1002/term.2941 ↗
36. Osteoblasts in bone tissue engineering10.1243/09544119JEIM821 ↗
37. Dey, K., Agnelli, S., Re, F., Russo, D., Lisignoli, G., Manferdini, C., Bernardi, S., Gabusi, E., and Sartore, L. (2019). Rational Design and Development of Anisotropic and Mechanically Strong Gelatin-Based Stress Relaxing Hydrogels for Osteogenic/Chondrogenic Differentiation. Macromol. Biosci., 19.10.1002/mabi.201970021 ↗
38. Advances in the Fabrication of Biomaterials for Gradient Tissue Engineering10.1016/j.tibtech.2020.06.005 ↗
39. Biomimetic Tissue Engineering: Tuning the Immune and Inflammatory Response to Implantable Biomaterials10.1002/adhm.201800490 ↗
40. Biomimetic Scaffolds for Bone Tissue Engineering10.1007/978-981-13-0445-3_7 ↗
41. Reddy, M.S.B., Ponnamma, D., Choudhary, R., and Sadasivuni, K.K. (2021). A Comparative Review of Natural and Synthetic Biopolymer Composite Scaffolds. Polymers, 13.10.3390/polym13071105 ↗
42. Sartore, L., Pasini, C., Pandini, S., Dey, K., Ferrari, M., Taboni, S., Chan, H.H.L., Townson, J., Viswanathan, S., and Mathews, S. (2022). Hybrid Core-Shell Polymer Scaffold for Bone Tissue Regeneration. Int. J. Mol. Sci., 23.10.3390/ijms23094533 ↗
43. Enhanced bone tissue regeneration using a 3D printed microstructure incorporated with a hybrid nano hydrogel10.1039/C6NR09652B ↗
44. Pasini, C., Pandini, S., Re, F., Ferroni, M., Borsani, E., Russo, D., and Sartore, L. (2023). New Poly(lactic acid)-Hydrogel Core-Shell Scaffolds Highly Support MSCs’ Viability, Proliferation and Osteogenic Differentiation. Polymers, 15.10.20944/preprints202311.1573.v1 ↗
45. (2023, January 20). Raise3D, Raise3D Premium PLA Technical Data Sheet. Available online: https://s1.raise3d.com/2020/12/PLA-Data-Sheet.zip.
46. Gibson, L.J., and Ashby, M.F. (2014). Cellular Solids: Structure and Properties, Cambridge University Press. [2nd ed.].
47. Tonello, S., Bianchetti, A., Braga, S., Almici, C., Marini, M., Piovani, G., Guindani, M., Dey, K., Sartore, L., and Re, F. (2020). Impedance-Based Monitoring of Mesenchymal Stromal Cell Three-Dimensional Proliferation Using Aerosol Jet Printed Sensors: A Tissue Engineering Application. Materials, 13.10.3390/ma13102231 ↗
48. Funda, G., Taschieri, S., Bruno, G.A., Grecchi, E., Paolo, S., Girolamo, D., and Del Fabbro, M. (2020). Nanotechnology Scaffolds for Alveolar Bone Regeneration. Materials, 13.10.3390/ma13010201 ↗
49. Human Mesenchymal Stem Cells and Innovative Scaffolds for Bone Tissue Engineering Applications10.1089/ten.teb.2022.0217 ↗
50. The Preparation and Biomedical Application of Biopolyesters10.2174/1389557519666191015211156 ↗
51. Nano-biocomposite scaffolds of chitosan, carboxymethyl cellulose and silver nanoparticle modified cellulose nanowhiskers for bone tissue engineering applications10.1016/j.ijbiomac.2018.01.089 ↗
52. Thermal and mechanical characteristics of poly(L-lactic acid) nanocomposite scaffold10.1016/S0142-9612(03)00080-2 ↗
53. Álvarez-Blanco, M., Infante-García, D., Marco, M., Giner, E., and Miguélez, M.H. (2024). Development of bone surrogates by material extrusion-based additive manufacturing to mimic flexural mechanical behaviour and fracture prediction via phase-field approach. Comput. Methods Programs Biomed., 254.10.1016/j.cmpb.2024.108287 ↗
54. Pasini, C., Pandini, S., Ramorino, G., and Sartore, L. (2024). Tailoring the properties of composite scaffolds with a 3D-Printed lattice core and a bioactive hydrogel shell for tissue engineering. J. Mech. Behav. Biomed. Mater., 150.10.1016/j.jmbbm.2023.106305 ↗
55. A simultaneous 3D printing process for the fabrication of bioceramic and cell-laden hydrogel core/shell scaffolds with potential application in bone tissue regeneration10.1039/C6TB00849F ↗
56. Two-step strategy for constructing hierarchical pore structured chitosan-hydroxyapatite composite scaffolds for bone tissue engineering10.1016/j.carbpol.2021.117765 ↗
57. Lee, S.S., Santschi, M., and Ferguson, S.J. (2022). Correction to “A Biomimetic Macroporous Hybrid Scaffold with Sustained Drug Delivery for Enhanced Bone Regeneration”. Biomacromolecules, 23.10.1021/acs.biomac.2c00203 ↗
58. Strategy to improve endogenous bone regeneration of 3D-printed PCL/nano-HA composite scaffold: Collagen designs with BMP-2 and FGF-210.1016/j.matdes.2023.111913 ↗
59. Strategy for enhancing mechanical properties and bone regeneration of 3D polycaprolactone kagome scaffold: Nano hydroxyapatite composite and its exposure10.1016/j.eurpolymj.2020.109814 ↗
60. Cell-free and cytokine-free self-assembling peptide hydrogel-polycaprolactone composite scaffolds for segmental bone defects10.1039/D2BM01609E ↗
61. Osteogenic Differentiation Factors of Multipotent Mesenchymal Stromal Cells in the Current Understanding10.2174/1381612827666210406150027 ↗
62. Mareschi, K., Marini, E., Niclot, A.G.S.B., Barone, M., Pinnetta, G., Adamini, A., Spadea, M., Labanca, L., Lucania, G., and Ferrero, I. (2022). A New Human Platelet Lysate for Mesenchymal Stem Cell Production Compliant with Good Manufacturing Practice Conditions. Int. J. Mol. Sci., 23.10.3390/ijms23063234 ↗
63. Oeller, M., Laner-Plamberger, S., Krisch, L., Rohde, E., Strunk, D., and Schallmoser, K. (2021). Human Platelet Lysate for Good Manufacturing Practice-Compliant Cell Production. Int. J. Mol. Sci., 22.10.3390/ijms22105178 ↗
64. Osteopontin mediates mineralization and not osteogenic cell development in vitro10.1042/BJ20140702 ↗
65. The effect of osteocalcin on in vitro lipid-induced hydroxyapatite formation and seeded hydroxyapatite growth10.1007/BF02557680 ↗
66. Different pattern of alkaline phosphatase, osteopontin, and osteocalcin expression in developing rat bone visualized by in situ hybridization10.1002/jbmr.5650050806 ↗
67. Tsao, Y.T., Huang, Y.J., Wu, H.H., Liu, Y.A., Liu, Y.S., and Lee, O.K. (2017). Osteocalcin Mediates Biomineralization during Osteogenic Maturation in Human Mesenchymal Stromal Cells. Int. J. Mol. Sci., 18.10.3390/ijms18010159 ↗
68. BMP signalling in skeletal development, disease and repair10.1038/nrendo.2016.12 ↗