Synergistic effect of integrating N-functionalized graphene and PEDOT:PSS as hole transporter bilayer for high-performance perovskite solar cells
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Perovskite Materials and Applications · Conducting polymers and applications · Organic Electronics and Photovoltaics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (55)
Show source-provided references
1. Jeon NJ, Na H, Jung EH, Yang T-Y, Lee YG, Kim G, Shin H-W, Il Seok S, Lee J, Seo J (2018) A fluorene-terminated hole-transporting material for highly efficient and stable perovskite solar cells. Nat Energy 3:682–68910.1038/s41560-018-0200-6 ↗
2. Jeong J, Kim M, Seo J, Lu H, Ahlawat P, Mishra A, Yang Y, Hope MA, Eickemeyer FT, Kim M (2021) Pseudo-halide anion engineering for α-FAPbI3 perovskite solar cells. Nature 592:381–38510.1038/s41586-021-03406-5 ↗
3. Elseman AM, Sharmoukh W, Sajid S, Cui P, Ji J, Dou S, Wei D, Huang H, Xi W, Chu L (2018) Superior stability and efficiency over 20% perovskite solar cells achieved by a novel molecularly engineered Rutin–AgNPs/thiophene copolymer. Adv Sci 5:180056810.1002/advs.201800568 ↗
4. Tsiba Matondo J, Malouangou Maurice D, Chen Q, Bai L, Guli M (2021) Inorganic copper-based hole transport materials for perovskite photovoltaics: challenges in normally structured cells, advances in photovoltaic performance and device stability. Sol Energy Mater Sol Cells 224:11101110.1016/j.solmat.2021.111011 ↗
5. Sajid S, Elseman AM, Ji J, Dou S, Wei D, Huang H, Cui P, Xi W, Chu L, Li Y (2018) Computational study of ternary devices: stable, low-cost, and efficient planar perovskite solar cells. Nano-Micro Lett 10:1–1110.1007/s40820-018-0205-5 ↗
6. Malinkiewicz O, Yella A, Lee YH, Espallargas GM, Graetzel M, Nazeeruddin MK, Bolink HJ (2014) Perovskite solar cells employing organic charge-transport layers. Nat Photonics 8:128–13210.1038/nphoton.2013.341 ↗
7. Hu W, Xu CY, Niu LB, Elseman AM, Wang G, Liu DB, Yao YQ, Liao LP, Zhou GD, Song QL (2019) High open-circuit voltage of 1.134 V for inverted planar perovskite solar cells with sodium citrate-doped PEDOT: PSS as a hole transport layer. ACS Appl Mater Interfaces 11:22021–2202710.1021/acsami.9b06526 ↗
8. Han W, Ren G, Liu J, Li Z, Bao H, Liu C, Guo W (2020) Recent progress of inverted perovskite solar cells with a modified PEDOT: PSS hole transport layer. ACS Appl Mater Interfaces 12:49297–4932210.1021/acsami.0c13576 ↗
9. Xia Y, Dai S (2021) Review on applications of PEDOTs and PEDOT: PSS in perovskite solar cells. J Mater Sci Mater Electron 32:12746–1275710.1007/s10854-020-03473-w ↗
10. Ko Y, Kim Y, Lee C, Kim Y, Jun Y (2018) Investigation of hole-transporting poly (triarylamine) on aggregation and charge transport for hysteresisless scalable planar perovskite solar cells. ACS Appl Mater Interfaces 10:11633–1164110.1021/acsami.7b18745 ↗
11. Liu Y, Liu Z, Lee E-C (2019) High-performance inverted perovskite solar cells using doped poly (triarylamine) as the hole transport layer. ACS Appl Energy Mater 2:1932–194210.1021/acsaem.8b02047 ↗
12. Xu CY, Hu W, Wang G, Niu L, Elseman AM, Liao L, Yao Y, Xu G, Luo L, Liu D (2019) Coordinated optical matching of a texture interface made from demixing blended polymers for high-performance inverted perovskite solar cells. ACS Nano 14:196–203
13. Sajid S, Elseman AM, Wei D, Ji J, Dou S, Huang H, Cui P, Li M (2019) NiO@carbon spheres: a promising composite electrode for scalable fabrication of planar perovskite solar cells at low cost. Nano Energy 55:470–47610.1016/j.nanoen.2018.11.004 ↗
14. Sajid S, Elseman AM, Huang H, Ji J, Dou S, Jiang H, Liu X, Wei D, Cui P, Li M (2018) Breakthroughs in NiOx-HTMs towards stable, low-cost and efficient perovskite solar cells. Nano Energy 51:408–42410.1016/j.nanoen.2018.06.082 ↗
15. Hasan AM, Raifuku I, Amin N, Ishikawa Y, Sarkar D, Sobayel K, Karim MR, Ul-Hamid A, Abdullah H, Shahiduzzaman M (2020) Air-stable perovskite photovoltaic cells with low temperature deposited NiOx as an efficient hole-transporting material. Opt Mater Express 10:1801–181610.1364/OME.391321 ↗
16. Elseman AM, Luo L, Song QL (2020) Self-doping synthesis of trivalent Ni2O3 as a hole transport layer for high fill factor and efficient inverted perovskite solar cells. Dalton Trans 49:14243–1425010.1039/D0DT03029E ↗
17. Wang X, Wu J, Yang Y, Liu X, Guo Q, Song Z, Li G, Lan Z, Huang M (2019) High performance and stable perovskite solar cells using vanadic oxide as a dopant for spiro-OMeTAD. J Mater Chem A 7:13256–1326410.1039/C9TA03351C ↗
18. Lou Y-H, Wang Z-K (2017) Aqueous-solution-processable metal oxides for high-performance organic and perovskite solar cells. Nanoscale 9:13506–1351410.1039/C7NR04692H ↗
19. Chiang C-H, Chen C-C, Nazeeruddin MK, Wu C-G (2018) A newly developed lithium cobalt oxide super hydrophilic film for large area, thermally stable and highly efficient inverted perovskite solar cells. J Mater Chem A 6:13751–1376010.1039/C8TA05264F ↗
20. Kaneko R, Chowdhury TH, Wu G, Kayesh ME, Kazaoui S, Sugawa K, Lee J-J, Noda T, Islam A, Otsuki J (2019) Cobalt-doped nickel oxide nanoparticles as efficient hole transport materials for low-temperature processed perovskite solar cells. Sol Energy 181:243–25010.1016/j.solener.2019.01.097 ↗
21. Elseman AM, Rashad M (2022) Influence of nitrogen atmosphere one-step heating assisted the solution processing of Kesterite Cu2ZnSnS4 as hole extraction on the efficacy of the inverted perovskite solar cells. Opt Mater 124:11199810.1016/j.optmat.2022.111998 ↗
22. Madhavan VE, Zimmermann I, Baloch AA, Manekkathodi A, Belaidi A, Tabet N, Nazeeruddin MK (2019) CuSCN as hole transport material with 3D/2D perovskite solar cells. ACS Appl Energy Mater 3:114–12110.1021/acsaem.9b01692 ↗
23. Krishna BR, Veerappan G, Bhyrappa P, Sudakar C, Ramasamy E (2022) Dual-functional inorganic CuSCN for efficient hole extraction and moisture sealing of MAPbI3 perovskite solar cells. Mater Adv 3:2000–201010.1039/D1MA00861G ↗
24. Girish K, Vishnumurthy K, Roopa T (2022) Role of conducting polymers in enhancing the stability and performance of perovskite solar cells: a brief review. Mater Today Sustain 17:10009010.1016/j.mtsust.2021.100090 ↗
25. Berhe TA, Su W-N, Chen C-H, Pan C-J, Cheng J-H, Chen H-M, Tsai M-C, Chen L-Y, Dubale AA, Hwang B-J (2016) Organometal halide perovskite solar cells: degradation and stability. Energy Environ Sci 9:323–35610.1039/C5EE02733K ↗
26. Jokar E, Huang ZY, Narra S, Wang CY, Kattoor V, Chung CC, Diau EWG (2018) Anomalous charge-extraction behavior for graphene-oxide (GO) and reduced graphene-oxide (rGO) films as efficient p-contact layers for high-performance perovskite solar cells. Adv Energy Mater 8:170164010.1002/aenm.201701640 ↗
27. Yin X, Zhou Y, Han J, Nan H, Tai M, Gu Y, Li J, Lin H (2018) Highly efficient inverted perovskite solar cells based on self-assembled graphene derivatives. J Mater Chem A 6:20702–2071110.1039/C8TA05955A ↗
28. Liu J, Xue Y, Gao Y, Yu D, Durstock M, Dai L (2012) Hole and electron extraction layers based on graphene oxide derivatives for high-performance bulk heterojunction solar cells. Adv Mater 24:2228–223310.1002/adma.201104945 ↗
29. Ma S, Liu X, Wu Y, Tao Y, Ding Y, Cai M, Dai S, Liu X, Alsaedi A, Hayat T (2020) Efficient and flexible solar cells with improved stability through incorporation of a multifunctional small molecule at PEDOT:PSS/perovskite interface. Sol Energy Mater Sol Cells 208:11037910.1016/j.solmat.2019.110379 ↗
30. Feng S, Yang Y, Li M, Wang J, Cheng Z, Li J, Ji G, Yin G, Song F, Wang Z, Li J, Gao X (2016) High-performance perovskite solar cells engineered by an ammonia modified graphene oxide interfacial layer. ACS Appl Mater Interfaces 8:14503–1451210.1021/acsami.6b02064 ↗
31. Redondo-Obispo C, Ripolles TS, Cortijo-Campos S, Alvarez AL, Climent-Pascual E, de Andrés A, Coya C (2020) Enhanced stability and efficiency in inverted perovskite solar cells through graphene doping of PEDOT: PSS hole transport layer. Mater Des 191:10858710.1016/j.matdes.2020.108587 ↗
32. Zhang X, Lin B, Wang F, Cheng Z, Shi X, Lougou BG (2020) Design of biomimetic leaf-type hierarchical nanostructure for enhancing the solar energy harvesting of ultra-thin perovskite solar cells. ES Energy Environ 10:22–33
33. Al-Gamal AG, Elseman AM, Chowdhury TH, Kabel KI, Farag AA, Rabie AM, Abd El-Sattar NEA, Islam A (2022) Promising nitrogen-doped graphene derivatives; a case study for preparations, fabrication mechanisms, and applications in perovskite solar cells. Top Curr Chem 381:610.1007/s41061-022-00416-3 ↗
34. Wang Y, Wang S, Chen X, Li Z, Wang J, Li T, Deng X (2018) Largely enhanced VOC and stability in perovskite solar cells with modified energy match by coupled 2D interlayers. J Mater Chem A 6:4860–486710.1039/C7TA11295E ↗
35. Sani E, Vallejo JP, Cabaleiro D, Lugo L (2018) Functionalized graphene nanoplatelet-nanofluids for solar thermal collectors. Sol Energy Mater Sol Cells 185:205–20910.1016/j.solmat.2018.05.038 ↗
36. Kim JM, Kim S, Choi S-H (2018) High-performance nip-type perovskite photodetectors employing graphene-transparent conductive electrodes N-type doped with amine group molecules. ACS Sustain Chem Eng 7:734–73910.1021/acssuschemeng.8b04322 ↗
37. Kim Y, Ryu J, Park M, Kim ES, Yoo JM, Park J, Kang JH, Hong BH (2014) Vapor-phase molecular doping of graphene for high-performance transparent electrodes. ACS Nano 8:868–87410.1021/nn405596j ↗
38. Hummers WS Jr, Offeman RE (1958) Preparation of graphitic oxide. J Am Chem Soc 80:133910.1021/ja01539a017 ↗
39. van der Pol TP, Keene ST, Saes BW, Meskers SC, Salleo A, van de Burgt Y, Janssen RA (2019) The mechanism of dedoping PEDOT: PSS by aliphatic polyamines. J Phys Chem C 123:24328–2433710.1021/acs.jpcc.9b07718 ↗
40. Wang JT-W, Wang Z, Pathak S, Zhang W, deQuilettes DW, Wisnivesky-Rocca-Rivarola F, Huang J, Nayak PK, Patel JB, Yusof HAM (2016) Efficient perovskite solar cells by metal ion doping. Energy Environ Sci 9:2892–290110.1039/C6EE01969B ↗
41. Hu L, Sun K, Wang M, Chen W, Yang B, Fu J, Xiong Z, Li X, Tang X, Zang Z (2017) Inverted planar perovskite solar cells with a high fill factor and negligible hysteresis by the dual effect of NaCl-doped PEDOT: PSS. ACS Appl Mater Interfaces 9:43902–4390910.1021/acsami.7b14592 ↗
42. Giuri A, Masi S, Colella S, Listorti A, Rizzo A, Kovtun A, Dell’Elce S, Liscio A, Esposito CC (2017) Rheological and physical characterization of PEDOT:PSS/graphene oxide nanocomposites for perovskite solar cells. Polym Eng Sci 57:546–55210.1002/pen.24554 ↗
43. Liu DB, Wang G, Niu LB, Chen LJ, Liu DY, Rao X, Elsemanand AM, Song QL (2019) Energy level bending of organic-inorganic halide perovskite by interfacial dipole. Phys Status Solidi (RRL) 13:190010310.1002/pssr.201900103 ↗
44. Sun K, Zhang S, Li P, Xia Y, Zhang X, Du D, Isikgor FH, Ouyang J (2015) Review on application of PEDOTs and PEDOT:PSS in energy conversion and storage devices. J Mater Sci Mater Electron 26:4438–446210.1007/s10854-015-2895-5 ↗
45. Mengistie DA, Ibrahem MA, Wang P-C, Chu C-W (2014) Highly conductive PEDOT: PSS treated with formic acid for ITO-free polymer solar cells. ACS Appl Mater Interfaces 6:2292–229910.1021/am405024d ↗
46. Lee D-Y, Na S-I, Kim S-S (2016) Graphene oxide/PEDOT:PSS composite hole transport layer for efficient and stable planar heterojunction perovskite solar cells. Nanoscale 8:1513–152210.1039/C5NR05271H ↗
47. Luo H, Lin X, Hou X, Pan L, Huang S, Chen X (2017) Efficient and air-stable planar perovskite solar cells formed on graphene-oxide-modified PEDOT:PSS hole transport layer. Nano-Micro Lett 9:1–1110.1007/s40820-016-0103-7 ↗
48. Salim T, Sun S, Abe Y, Krishna A, Grimsdale AC, Lam YM (2015) Perovskite-based solar cells: impact of morphology and device architecture on device performance. J Mater Chem A 3:8943–896910.1039/C4TA05226A ↗
49. Zhao D, Sexton M, Park HY, Baure G, Nino JC, So F (2015) High-efficiency solution-processed planar perovskite solar cells with a polymer hole transport layer. Adv Energy Mater 5:140185510.1002/aenm.201401855 ↗
50. Guerrero A, Garcia-Belmonte G, Mora-Sero I, Bisquert J, Kang YS, Jacobsson TJ, Correa-Baena J-P, Hagfeldt A (2016) Properties of contact and bulk impedances in hybrid lead halide perovskite solar cells including inductive loop elements. J Phys Chem C 120:8023–803210.1021/acs.jpcc.6b01728 ↗
51. Romero B, del Pozo G, Arredondo B, Martín-Martín D, Hernández-Balaguera E, González MDCL (2019) Characterization of organic and perovskite solar cells by impedance spectroscopy. Women in Renewable Energy (WiRE) 11095:110950N.10.1117/12.2530568 ↗
52. Zhou Z, Li X, Cai M, Xie F, Wu Y, Lan Z, Yang X, Qiang Y, Islam A, Han L (2017) Stable inverted planar perovskite solar cells with low-temperature-processed hole-transport bilayer. Adv Energy Mater 7:170076310.1002/aenm.201700763 ↗
53. Chowdhury TH, Akhtaruzzaman M, Kayesh ME, Kaneko R, Noda T, Lee J-J, Islam A (2018) Low temperature processed inverted planar perovskite solar cells by r-GO/CuSCN hole-transport bilayer with improved stability. Sol Energy 171:652–65710.1016/j.solener.2018.07.022 ↗
54. Zuo C, Ding L (2017) Modified PEDOT layer makes a 1.52 V voc for perovskite/PCBM solar cells. Adv Energy Mater 7:160119310.1002/aenm.201601193 ↗
55. Zhang P, Wu S, Chen Y, Li X, Sun F, Liu M, Chen Z, Li S (2022) Hysteresis-free and efficient perovskite solar cells using SnO2 with self-assembly L-cysteine layer. Eng Sci 20:180–187