journal article·2022-02

CH3NH3PbI3 Perovskite with Enhanced Absorption and Stability Using Silver Nanowires and the Anatase Structure of TiO2 Nanowires

Yunjia Wang, Junle Qu, Qiao Wen

Journal of Electronic Materials· Volume 51· Issue 2
Publisher page

Abstract

Recently, CH3NH3PbX3 (X = Cl, Br, I) perovskites have been widely reported in photoelectric fields. However, the lower absorption efficiency and poor stability have restricted their further applications. In this work, we propose an absorber composed of CH3NH3PbI3 perovskite, silver nanowires (AgNWs) and TiO2 NWs. Using AgNWs and TiO2 NWs, the combined perovskite material had a maximum tenfold absorption enhancement than pure CH3NH3PbI3 perovskite, and the enhancement effect was higher than the recent report we carried out using silver nanowires (AgNWs), in which we obtained a maximum fivefold enhancement. In addition, the proposed complex showed good long-term stability and effectively prevented CH3NH3PbI3 perovskite from interacting with the active molecules in the air. Our work demonstrates that a synergistic effect was effectively utilized by AgNWs and TiO2 NWs and provides a facile method for absorption and stability improvement of CH3NH3PbI3 perovskites, thus broadening their photoelectric applications.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Perovskite Materials and Applications · Quantum Dots Synthesis And Properties · ZnO doping and properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (50)

Show source-provided references
1. M.A. Green, K.Y. Emery, Y. Hishikawa, W. Warta, and E.D. Dunlop, Solar cell efficiency tables (version 40). Prog. Photovoltaics. 20, 606 (2012).10.1002/pip.2267 ↗
2. M.A. Green, Silicon solar-cells-evolution, highly-efficiency design and efficiency enhancement. Semicond. Sci. Technol. 8, 1 (1993).10.1088/0268-1242/8/1/001 ↗
3. K. Branker, M.J.M. Pathak, and J.M.A. Pearce, Review of solar photovoltaic levelized cost of electricity. Renew. Sustain. Energy Rev. 15, 4470 (2011).10.1016/j.rser.2011.07.104 ↗
4. F. Mohamadkhani, M. Heidariramsheh, S. Javadpour, E. Ghavaminia, and N. Taghavinia, Sb2S3 and Cu3SbS4 nanocrystals as inorganic hole transporting materials in perovskite solar cells. Sol. Energy 223, 106 (2021).10.1016/j.solener.2021.05.049 ↗
5. R.L. Wang, Y.Q. Shang, P. Kanjanaboos, W.J. Zhou, and Z.J. Ning, Colloidal quantum dot ligand engineering for high performance solar cells. Sargent. Energy Emission Sci. 9, 1130 (2016).
6. P.R. Brown, D. Kim, R.R. Lunt, N. Zhao, M.G. Bawendi, J.C. Crossman, and V. Bulowic, Energy level modification in lead sulfide quantum dot thin films through ligand exchange. ACS Nano 8, 5863 (2016).10.1021/nn500897c ↗
7. C. Liu, Y. Wang, H. Geng, T. Zhu, E. Ertekin, D. Gosztola, S. Yang, J. Huang, B. Yang, K. Han, S.E. Canton, Q. Kong, K. Zheng, and X. Zhang, Asynchronous photoexcited electronic and structural relaxation in lead-free perovskite. J. Am. Chem. Soc. 141, 13074 (2020).10.1021/jacs.9b04557 ↗
8. J.P. Correa-Baena, A. Abate, M. Saliba, W. Tress, T. Jesper, M. Jacobsson, and A. Gratzel, The rapid evolution of highly efficient perovskite solar cells. Energy Environ. Sci. 10, 710 (2017).10.1039/C6EE03397K ↗
9. I. Chung, B. Lee, J. He, R.P.H. Chang, and M.G. Kanatzidis, All-solid-state dye-sensitized solar cells with high efficiency. Nature 485, 486 (2012).10.1038/nature11067 ↗
10. F. Hao, C.C. Stoumpos, D.Y. Cao, R.P.H. Chang, and M.G. Kanatzids, Lead-free solid-state organic-inorganic halide perovskite solar cells. Nat. Photon. 8, 489 (2014).10.1038/nphoton.2014.82 ↗
11. X. Zhang, R. Munir, Z. Xu, Y.C. Liu, H. Tsai, W.Y. Nie, J.B. Li, T.Q. Niu, D.M. Smilgies, M.G. Kanatzids, A.D. Mohite, K. Zhao, A. Amassian, and S.H. Liu, Phase transition control for highly performance ruddlesden-popper perovskite solar cell. Adv. Mater. 30, 1707166 (2017).10.1002/adma.201707166 ↗
12. H. Cho, C. Wolf, J.S. Kim, H.J. Yun, J.S. Bae, H. Kim, J.M. Heo, S. Ahn, and T.W. Lee, High-efficiency solution processed inorganic metal halide perovslite light-emitting diodes. Adv. Mater. 29, 1405 (2017).
13. G. Grancini, C. Roldan-Carmona, I. Zimmermann, E. Mosconi, X. Lee, D. Martineau, S.F. Narbey, F. Oswald, F. De Angels, M. Graetzel, and M.K. Nazeeruddin, One-year stable perovskite solar cell by 2D/3D interface engineering. Nat. Commun. 8, 15685 (2017).10.1038/ncomms15684 ↗
14. Z. Guo, Y. Wan, M.J. Yang, J. Snaider, K. Zhu, and L.B. Huang, Long-range hot-carrier transport in hybrid perovskite visualized by ultrafast microscopy. Science 356, 59 (2017).10.1126/science.aam7744 ↗
15. J.S. Huang, Y.B. Yuan, Y.C. Shao, and Y.F. Yan, Understanding the physical properties of hybrid perovskite for photovoltaic applications. Nat. Rev. 2, 17042 (2017).
16. C. Blancon, H. Tsai, W. Nie, C.C. Stoumpos, L. Pedessean, C. Katan, M. Kepenekian, C.M.M. Soe, K. Appavoo, M.Y. Sfeir, S. Tretiak, P.M. Ajayan, M.G. Kanatxidis, J. Even, J.J. Cruchet, and A.D. Mohite, Extremely efficient internal exciton dissociation through edge states in layered 2D perovskite. Science 355, 1288 (2017).10.1126/science.aal4211 ↗
17. G.R. Chen, Y.Z. Li, M. Bick, and J. Chen, Smart textiles for electricity generation. Chem. Rev. 120, 3688 (2020).
18. D. Vaitukaityte, Z. Wang, T. Malinauskas, A. Magomedov, G. Bubniene, V. Jankauskas, V. Getautis, and H.J. Snaith, Efficient and stable perovskite solar cells using low-cost aniline-based enamine hole-transporting materials. Adv. Mater. 30, 18037351 (2018).10.1002/adma.201803735 ↗
19. Y. Jin, J. Feng, X.L. Zhang, M. Xu, Y.G. Bi, Q.D. Chen, H.Y. Wang, H.B Sun. Surface-plasmon enhanced absorption in organic solar cells by employing a periodically corrugated metallic electrode. Appl. Phys. Lett. 101, 163303 (2012).10.1063/1.4761947 ↗
20. B.K. Min, V.T. Nguyen, S.J. Kim, Y. Yi, and C.G. Choi, Surface plasmon resonance-enhanced near-infared absorption in single-layer MoS2 with veritically aligned nanoflaskes. ACS Appl. Mater. Interf. (2020). https://doi.org/10.1021/acsami.9b18148.10.1021/acsami.9b18148 ↗
21. N.N. Zhang, F. Huang, S.L. Zhao, X.H. Lv, Y.H. Zhou, S.W. Xiang, S.M. Xu, Y.Z. Li, G.R. Chen, C.Y. Tao, Y. Nie, J. Chen, and X. Fan, Photo-rechargeable fabrics as sustainable and robust power sources for wearable bioelectronics. Matter. 2, 1260 (2020).10.1016/j.matt.2020.01.022 ↗
22. N.N. Zhang, J. Chen, Y. Huang, W.W. Guo, J. Yang, J. Du, X. Fan, and C.Y. Tao, A wearable all-solid photovoltaic textile. Adv. Matter. 28, 263 (2016).10.1002/adma.201504137 ↗
23. Q.L. Jiang, M.M. Chen, J.Q. Li, M.C. Wang, X.Q. Zeng, T. Besara, J. Lu, Y. Xin, X. Shan, B.C. Pan, C.C. Wang, S.C. Lin, T. Siegrist, Q.F. Xiao, and Z.B. Yu, Electrochemical doping of halide perovskites with ion intercalation. ACS Nano 11, 1073 (2017).10.1021/acsnano.6b08004 ↗
24. S.D. Stranks, Nonradiative losses in metal halide perovskites. ACS Energy Lett. 2, 1515 (2017).10.1021/acsenergylett.7b00239 ↗
25. S.B. Li, P. Zhang, H. Sarvari, D.T. Liu, J. Wu, Y.J. Yang, Z.M. Wang, and Z.D. Chen, Interface engineering of high efficiency perovskite solar cells based on ZnO nanorods using atomic layer. Nano Res. 10, 1092 (2017).10.1007/s12274-016-1407-0 ↗
26. D.T. Liu, S.B. Li, P. Zhang, Y.F. Wang, R. Zhang, H. Sarvari, P. Wang, J. Wu, Z.M. Wang, and Z.D. Chen, Efficient planar heterojunction perovskite solar cells with Li-doped compact TiO2 layer. Nano Energy 31, 462 (2016).
27. F.P.G. Arquer, X.W. Gong, R.P. Sabatini, M. Liu, G.H. Kim , B.R. Sutherland, O. Voznyy, J.X. Xu, Y.J. Pang, S. Hoogland, D. Sinton and E. Sargent. Field-emission from quantum-dot-in-perovskite solids. Nat. Commun. 8, 14757 (2017)10.1038/ncomms14757 ↗
28. R. Begum, M.R. Panrida, A.L. Abdelhady, B. Murali, N.M. Alyami, G.H. Ahmed, M.N. Hedhili, O.M. Bakr, and O.F. Mohammed, Engineering interfacial charge transfer in CsPbBr 3 perovskite nanocrystals by heterovalent doping. J. Am. Chem. Soc. 139, 731 (2017).10.1021/jacs.6b09575 ↗
29. M. Laska, Z. Krzemiriska, K. Kluczyk-Korch, D. Schaadt, E. Popko, W.A. Jacak, and J.E. Jacak, Metallization of solar cells, exciton channel of plasmo photovoltaic effect in perovskite cells. Nano Energy 75, 104751 (2020).10.1016/j.nanoen.2020.104751 ↗
30. W.A. Jacak, and J.E. Jacak, New channel of plasmon photovoltaic effect in metalized perovskite solar cells. J. Phys. Chem. C 123, 30633 (2019).10.1021/acs.jpcc.9b09763 ↗
31. Y.J. Wang, J.L. Qu, and Q. Wen, CH3NH3PbI3 perovskite/silver nanowire complex with higher absorption and stability. J. Elec. Mater. 50, 5177 (2021).10.1007/s11664-021-09021-4 ↗
32. Z.H. Bakr, Q. Wali, A. Fakharuddin, L.S. Mende, T.M. Brown, and R. Jose, Advances in hole transport materials engineering for stable and efficient perovskite solar cells. Nano Energy 34, 271 (2017).10.1016/j.nanoen.2017.02.025 ↗
33. M.J. Asghar, J. Zhang, H. Wang, and P.D. Lund, Device stability of perovskite solar cell-A review. Renew. Suatain. Energy Rev. 77, 131 (2017).10.1016/j.rser.2017.04.003 ↗
34. M. Zhang, J.S. Yun, Q.S. Wa, J.H. Zheng, C.F.J. Lau, X.F. Deng, J. Kim, D. Kim, J. Seidel, M.A. Green, S.J. Huang, and A.W.Y. Ho-Bailline, High-efficiency rubidium-incorporated perovskite soalr cell by gas quenching. ASC. Energy Lett. 2, 438 (2017).10.1021/acsenergylett.6b00697 ↗
35. T.S. Sherkar, C. Momblona, L. Gil-Escrig, J. Avila, M. Sessolo, H.J. Bolink, and L.J.A. Koster, Recombination in perovskite solar cells: significance of grain boundaries, interface traps, and defect irons. ACS Energy Lett. 2, 1214 (2017).10.1021/acsenergylett.7b00236 ↗
36. M. Fu, P. Tamarat, H. Huang, J. Even, A.L. Rogach, and B. Lounis, Neutral and charged exciton fine structure in single lead halide perovskite nanocrystals revealed by magnetro-optical spectroscopy. Nano Lett. 17, 2895 (2017).10.1021/acs.nanolett.7b00064 ↗
37. Y. Hou, X. Du, S. Scheiner, D.P. Mcmeekin, Z. Wang, N. Li , M.S. Killan, H. Richter, I. Levchuk, N. Schrenke, E. Spiecker, T. Stubhan, N.A. Luechinger, A. Hirsch, P. Schmuki, H.P. Steinruck, R.H. Fink, M. Halik, H.J Snaith, C.J.A. Brabec, Generic interface to reduce the efficiency-stability-cost gap of perovskite soalr cells. Science. 1, 1192 (2017).10.1126/science.aao5561 ↗
38. B. Oregan, and M.A. Gratzel, Low-cost, high-efficiency solar cell based on dye-sensitized colloidal TiO2 films. Nature 353, 737 (1991).10.1038/353737a0 ↗
39. W. Zi, X.D. Ren, Q.B. Wei, F. Gao, and S.Z. Liu, A potential high efficiency thin film solar cell design. Opt. Commun. 380, 1 (2016).10.1016/j.optcom.2016.05.074 ↗
40. H.H. Tsai, W.Y. Nie, J.C. Blancon, C.C. Stoumpos, R. Asadpour, B. Harutyunyan, A.J. Neukirch, R. Verduzco, J.J. Crocher, S. Tretiak, L. Pedesseau, J. Even, M.A. Alam, G. Gupta, J. Lou, P.M. Ajayan, M.J. Bedzyk, M.G. Kanatzidis, and A.D. Mohite, High-efficiency two-dimensional ruddlesden-popper perovskite solar cells. Nature 536, 312 (2016).10.1038/nature18306 ↗
41. S.J. Yuan, J. Wang, K.L. Yang, P.F. Wang, X. Zhang, Y.Q. Zhan, and L.R. Zheng, High efficiency MAPbI3-x perovskite solar cell via interfacial passivation. Nanoscale 10, 18909 (2018).10.1039/C8NR05504A ↗
42. J.H. Im, C.R. Lee, J.W. Lee, S.W. Park, N.G. Park. 6.5% efficient perovskite quantum-dot-sensitized solar cell. Nanoscale 3, 4088 (2011).10.1039/c1nr10867k ↗
43. X.L. Zhang, P.K. Santra, L. Tian, M.B. Johansson, H. Rensmo, and E.M.J. Johanaaon, Highly efficient flexible quantum dot solar cells with improved electron extraction using MgZnO nanocrystals. ACS Nano 11, 8478 (2017).10.1021/acsnano.7b04332 ↗
44. M. He, B. Li, X. Cui, B. Jiang, Y. He, Y.H. Chen, D.O. Neil, P. Szymanski, M.A. El-Sayed, J.S. Huang, and Z.Q. Lin, Meniscus-assisted solution printing of large-grained perovskite films for high-efficiency solar cell. Nat. Commun. 8, 16045 (2017).10.1038/ncomms16045 ↗
45. Y. Kuo, W.Y. Chang, Y.W. Kiang, and C.C. Yang, Effects of surface plasmon coupling on the whispering-gallery resonance in a hexagonal nanowire cavity structure. Plasmonics 15, 39 (2020).10.1007/s11468-019-00999-6 ↗
46. J.J. Zhang, R.F. Zhou, H. Minamimoto, and K. Murakoshi, Plasmon-induced metal restructuring and graphene oxidation monitored by surface-enhanced Raman spectroscopy. Appl. Mater. Today. 15, 372 (2019).10.1016/j.apmt.2019.02.018 ↗
47. L.C. Chen, K.L. Lee, K.Y. Lee, Y.W. Huang, and R.M. Lin, Study of metal–semiconductor–metal CH3NH3PbBr3 perovskite photodetectors prepared by inverse temperature crystallization method. Sensors. 20, 297 (2020).10.3390/s20010297 ↗
48. M. He, B. Li, X. Cui, B. Jiang, Y. He, Y.H. Chen, D. Oneil, P. Szymanski, M.A. El-Sayed, J.S. Huang, and Z.Q. Lin, Meniscus-assisted solution printing of large-grained perovskite films for high-efficiency solar cell. Nat. Commun. 8, 16045 (2017).10.1038/ncomms16045 ↗
49. T.Y. Chen, C.M. Fan, J.Y. Wu, and T.L. Lin, Hybrid silver nanowire/titanium oxides nanocomposites as anode for dye-sensitized solar cell application. J. Chin. Chem. Soc. 56, 1244 (2017).10.1002/jccs.200900179 ↗
50. J.C. Chou, Y.C. Lin, C.H. Lai, P.Y. Kuo, Y.H. Nien, J.X. Chang, G.M. Hu, and Z.R. Yong, Electron conduction channel of silver nanowire modified TiO2 photoanode for improvement of interface impedance of dye-sensitized solar cell. J. Elect. Dev. Soc. (2021). https://doi.org/10.1109/JEDS2021.3055214.10.1109/JEDS2021.3055214 ↗