Effect of Zr/Ti ratio on electrically induced light scattering property of Pb0.92La0.08 (ZryTi1−y)0.98 O3 ceramics
Source abstract
Abstract
Lanthanum-modified lead zirconate titanate ceramics Pb0.92La0.08(ZryTi1−y)0.98O3 (y = 64.5 ~ 68.0 mol%) were prepared by a hot-press sintering process in this study. Systematic analysis of the microstructure, dielectric, ferroelectric, and electrically induced light scattering properties were carried out. All samples were crystallized into a single perovskite phase with a dense microstructure. The maximum dielectric constants ermax decreased with the Zr/Ti ratio increasing (1 kHz), and the P-E hysteresis loops showed that the remnant polarization (Pr) and the coercive electric field (Ec) were significantly reduced accompanied with the gradually enhanced antiferroelectric-ferroelectric phase transition while the Zr/Ti ratio increasing (measured at room temperature). Noticeably, the threshold electric field of electrically induced light scattering performance (examined at λ = 633nm) significantly decreased as the Zr/Ti ratio decreasing. The PLZT (8/65.5/34.5) ceramics exhibited the optimum electrically induced light scattering performance under a very low threshold electric field.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Ferroelectric and Piezoelectric Materials · Microwave Dielectric Ceramics Synthesis · Multiferroics and related materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (43)
Show source-provided references
1. Z. Peng et al., Doubly Q-switched Nd: YAG ceramic laser. J. Russ. Laser Res. 39(2), 187–191 (2018)10.1007/s10946-018-9706-4 ↗
2. Yun et al., Design and investigation of a novel silicon/ferroelectric hybrid electro-optical microring modulator. Opt. Commun. 385, 130-135 (2017)10.1016/j.optcom.2016.10.050 ↗
3. G.H. Haertling, C.E. Land, Hot-pressed (Pb,La)(Zr,Ti)O3 ferroelectric ceramics for electrooptic applications. J. Am. Ceram. Soc. 54(1), 1–11 (2015)10.1111/j.1151-2916.1970.tb12105.x-i1 ↗
4. G.H. Haertling, C.E. Land, Recent improvements in the optical and electrooptic properties of PLZT ceramics. Ferroelectrics 3(1), 269–280 (2005)10.1080/00150197208235318 ↗
5. W. Ji, X. He, X. Zeng, W. Cheng, ... D. Wang, Effects of PMN/PT ratio on, optical and electro-optic properties of PLMNT transparent ceramics. Ceram. Int. 41(9), 10387–10393 (2015)10.1016/j.ceramint.2015.03.101 ↗
6. T. Utsunomiya, Optical switch using PLZT ceramics. J. Ferroelectrics 109(1), 235–240 (1990)10.1080/00150199008211419 ↗
7. C.E. Land, Variable birefringence light scattering, and surface-deformation effects in PLZT ceramics.J. Ferroelectrics. 7(1), 45–51(1973)10.1080/00150197408237948 ↗
8. G.H. Haertling, Ferroelectric ceramics: History and technology. J. Am. Ceram. Soc. 82(4), 802–803 (1999)10.1111/j.1151-2916.1999.tb01840.x ↗
9. F. Liu et al., Polarization analysis and experimental implementation of PLZT electro-optical switch using fiber Sagnac interferometers. J. Opt. Soc. Am. B-Opt. Phys. 23(4), 709–713 (2006)10.1364/JOSAB.23.000709 ↗
10. P.C. Osbond et al., Coarse-grain light-scattering PLZT. Ferroelectrics 54(1), 203–206 (1984)10.1080/00150198408215851 ↗
11. S.S. Bains, P.C. Osbond, R.W. Whatmore, F.W. Ainger, P.L.Z.T. scatter mode. Br. Ceram. Proc. 36, 67–78 (1985)
12. A. Karppinen et al., Electrically controlled optical attenuators and switches with ferroelectric liquid crystals. Ferroelectrics 114(1), 93–97 (1991)10.1080/00150199108221572 ↗
13. B. Xia, X. He, X. Zheng, Electrically induced light scattering performances of lanthanum-modified lead zirconate titanate transparent ceramics. J. Electroceram. 29(3), 192–197 (2012)10.1007/s10832-012-9760-1 ↗
14. B. Zhu et al., Effects of Bi Doping on the Optical and Electric-Induced Light Scattering Performance of PLZT (8.0/69/31) Transparent Ceramics. J. Materials 12(9),1437(2019)10.3390/ma12091437 ↗
15. X. Zeng et al., Effects of lanthanum substitution on dielectric,ferroelectric andelectro-optic propertiesof slim-loop PLZT ceramics. J. Materials ence Forum 913, 459–65(2018)10.4028/www.scientific.net/MSF.913.459 ↗
16. Y. YLmaz, Y. Babur, A.M. Mamedov, Investigation on the structure of PLZT ceramics due to light scattering. Key Eng. Mater. 264–268, 1297–1300 (2004)10.4028/www.scientific.net/KEM.264-268.1297 ↗
17. X. Zhang et al., Temperature dependence of electric-induced light scattering performance for PLZT ceramics. J. Am. Ceram. Soc. 97(5), 1389–1392 (2014)10.1111/jace.12936 ↗
18. K. Pytel et al., Processing, basic characterization and standard dielectric measurements on PLZT x/65/35 (2 ≤ x ≤ 13) ceramics. Ferroelectrics 499(1), 9–22 (2016)10.1080/00150193.2016.1171644 ↗
19. Z. Hu, B. Ma, S. Liu et al., Relaxor behavior and energy storage performance of ferroelectric PLZT thin films with different Zr/Ti ratios[J]. Ceram. Int. 40(1), 557–562 (2014)10.1016/j.ceramint.2013.05.139 ↗
20. C.-S. Park, S.-M. Lee, H.E. Kim, Effects of excess PbO and Zr/Ti ratio on microstructure and electrical properties of PZT Films. J. Am. Ceram. Soc. 91(9), 2923–2927 (2008)10.1111/j.1551-2916.2008.02567.x ↗
21. N. Funsueb, S. Somwan, L. Chumprasert et al., Effect of Zr/Ti ratio on electrical properties of Pb0.91La0.09(ZrxTi1–x)O3 ceramics[J]. Appl. Mech. Mater. 804, 42–46 (2015)10.4028/www.scientific.net/AMM.804.42 ↗
22. C. Pramila, T.C. Goel, P.K.C. Pillai, Piezoelectric, pyroelectric and dielectric properties of La- and Sm-doped PZT ceramics. J. Mater. Sci. Lett. 12(21), 1657–1658 (1993)10.1007/BF00418821 ↗
23. H.D. Sharma, A. Govindan, T.C. Goel, Effect of rare earth ions on the structural parameters of modified PLnZT ceramics (5/65/35). J. Mater. Sci. Lett. 15(16), 1424–1426 (1996)10.1007/BF00275295 ↗
24. H.R. Rukmini, R.N.P. Choudhary, D.L. Prabhakara, Effect of sintering temperature on Na-modified PLZT ceramics. J. Mater. Chem. Phys. 64(3), 171–178 (2000)10.1016/S0254-0584(99)00149-2 ↗
25. Z. Xu, X. Zeng, Z. Cao et al., Effects of barium substitution on the optical and electrical properties of PLZT transparent electro-optical ceramics[J]. Ceram. Int. 45(14), 17890–17897 (2019)10.1016/j.ceramint.2019.06.005 ↗
26. Tao Shi, Gen Li, Jing Zhu, Compositional design strategy for high performance ferroelectric oxides with perovskite structure.J.Ceram.Int. 43(3),2910–2917(2017)10.1016/j.ceramint.2016.11.085 ↗
27. Y.H. Xu, Ferroelectric Materials and Their Applications (North-Holland, Amsterdam, 1991), pp. 163–215
28. S. Somwan, A. Ngamjarurojana, Study of aging behavior of 9/70/30 and 9/65/35 PLZT by optical interferometric technique. Ceram. Int. 41(6), 7536–7542 (2015)10.1016/j.ceramint.2015.02.076 ↗
29. Y. Liu et al., Structure and electric properties of (1– x)(Bi1/2Na1/2) TiO3 – x BaTiO3 systems. J. Wuhan Univ. Technol. Mater. Sci. Ed. 22(2), 315–319 (2007)10.1007/s11595-005-2315-4 ↗
30. E. Breval, W. Chiping, J.P. Dougherty, PLZT phases near lead zirconate: Determination by X-ray diffraction. J. Am. Ceram. Soc. 88, 437–442 (2005)10.1111/j.1551-2916.2005.00102.x ↗
31. X. Zong et al., Crystallization and morphology of Pb0.92La0.08(Zr0.68Ti0.32)0.98O3 powders synthesized using the gel-hydrothermal process. Cryst. Res. Technol. 2100053. https://doi.org/10.1002/crat.202100053 (2021)10.1002/crat.202100053 ↗
32. Y. Xu, Ferroelectric and piezoelectric materials[M]. (Science Press, 222, 1978)
33. N. Funsueb, S. Ngamjarurojana, A. Limpichaipanit, Effect of sintering condition on electrical properties of PLZT ceramics. Key Eng. Mater. 675–676, 522–526 (2016)10.4028/www.scientific.net/KEM.675-676.522 ↗
34. L. Chumprasert et al., Effect of soaking time on phase formation and electrical properties of PLZT based ceramics. Ferroelectrics 457(1), 16–22 (2013)10.1080/00150193.2013.846752 ↗
35. N. Funsueb et al, Effect of composition and grain size on dielectric, ferroelectric and induced strain behavior of PLZT/ZrO composites-sciencedirect. J. Ceram. Int. 44(6),634–6353(2018) (2018)10.1016/j.ceramint.2018.01.025 ↗
36. A. Kumada, G. Toda, Y. Otomo, An electrooptic image storage device using field induced reversible transitions between AFE and FE phases of PLZT ceramics. Ferroelectrics 7(1), 367–369 (1974)10.1080/00150197408238049 ↗
37. W. Ji et al., Effect of La content on dielectric, ferroelectric and electro-optic properties of Pb(Mg1/3Nb2/3)O3–PbTiO3 transparent ceramics. Ceram. Int. 41(2), 1950–1956 (2015)10.1016/j.ceramint.2014.07.138 ↗
38. Z. Cheng, L. Zhang, X. Yao, Effect of space charge on micro-macro domain transition of PLZT. IEEE Trans. Electr. Insul. 27, 773–776 (1992)10.1109/14.155796 ↗
39. Q. Yin, Microstructure, property and processing of functional ceramics (Metallurgical Industry Press. Beijing, China, 2005), pp. 57–67
40. Yu. Huizhu et al., Investigation on the Electric-Induced Light Scattering of PLZT Transparent Ceramics.J. Am. Ceram. Soc. 98(12), 3643–3646(2016)10.1111/jace.13951 ↗
41. A.J. Moulson, J.M. Herbert. Electroceramics: Materials, properties, applications [M], p 457–459 (2003)10.1002/0470867965 ↗
42. S. Somwan, N. Funsueb, A. Limpichaipanit et al., Influence of low external magnetic field on electric field induced strain behavior of 9/70/30, 9/65/35 and 9/60/40 PLZT ceramics. J. Ceram. Int. 42(11), 13223–13231 (2016)10.1016/j.ceramint.2016.05.115 ↗
43. MB Rauls, W Dong, JE Huber et al., The effect of temperature on the large field electromechanical response of relaxor ferroelectric 8/65/35 PLZT[J]. Acta Mater. 59(7), 2713–2722 (2011)10.1016/j.actamat.2011.01.009 ↗