journal article·2026-12Open access

Computational investigation of liquid metal surface oxidation mechanism

Jiewei Zheng, Ali Zavabeti, Kevin Tran, Torben Daeneke, Rosalie K. Hocking, Ken Chiang, Michelle J.S. Spencer

Abstract

Liquid metals (LMs) are promising catalytic materials due to their unique self-limiting oxide layers that significantly influence catalytic performance. However, the atomic-scale mechanisms governing oxide formation remain incompletely understood. We employed ab initio molecular dynamics (AIMD) simulations to investigate surface oxidation of three representative LM systems: gallium (Ga), eutectic gallium-indium (EGaIn), and tin-indium (SnIn). We elucidated the oxide layer characteristics in each system, showing O 2 molecules will approach the surface in a parallel orientation before adsorbing and dissociating preferentially over the base metal. Ga appears to form a self-limiting oxide layer where the oxygen is confined to the uppermost layer, forming an ultrathin 2D metal oxide network. EGaIn oxidation occurs preferentially with Ga, causing In atoms to segregate to the surface while remaining largely unoxidised. SnIn oxidation results in a thin oxide layer extending into the bulk, predominantly comprising In oxide with some Sn oxide. Electronic characterization revealed mixed ionic-covalent bonding, with EGaIn and SnIn exhibiting enhanced unoccupied states above the Fermi level. While the oxide thermodynamic stability causes surface passivation during the initial oxide formation, the kinetics of further oxidation is governed primarily by availability of reactive metal sites. These findings provide useful insights to help guide the rational design of LM-based catalysts.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Surface Modification and Superhydrophobicity · Nanomaterials and Printing Technologies · Fluid Dynamics and Thin Films

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (48)

Show source-provided references
1. Liquid metals: fundamentals and applications in chemistry10.1039/C7CS00043J ↗
2. Direct conversion of CO2 to solid carbon by Ga-based liquid metals10.1039/D1EE03283F ↗
3. Insights into the interfacial contact and charge transport of gas-sensing liquid metal marbles10.1021/acsami.2c06908 ↗
4. Instant‐in‐air liquid metal printed ultrathin tin oxide for high‐performance ammonia sensors10.1002/adfm.202309342 ↗
5. Wafer-scale two-dimensional semiconductors from printed oxide skin of liquid metals10.1038/ncomms14482 ↗
6. Gallium nanodroplets are anti-inflammatory without interfering with iron homeostasis10.1021/acsnano.1c10981 ↗
7. Emergence of liquid metals in nanotechnology10.1021/acsnano.9b04843 ↗
8. Post‐transition metal electrodes for sensing heavy metal ions by stripping voltammetry
9. Emerging applications of liquid metals featuring surface oxides10.1021/am5043017 ↗
10. Eutectic Gallium‐Indium (EGaIn): a liquid metal alloy for the formation of stable structures in microchannels at room temperature10.1002/adfm.200701216 ↗
11. A liquid metal reaction environment for the room-temperature synthesis of atomically thin metal oxides10.1126/science.aao4249 ↗
12. An exploration into two-dimensional metal oxides, and other 2D materials, synthesised via liquid metal printing and transfer techniques10.1039/D0DT04364H ↗
13. The role of oxygen-vacancy in bifunctional indium oxyhydroxide catalysts for electrochemical coupling of niomass valorization with CO2 conversion10.1038/s41467-023-37679-3 ↗
14. Improving the methane oxidation by self-adaptive optimization of liquid-metal catalysts10.1002/anie.202421554 ↗
15. Defect engineering for surface reconstruction of metal oxide catalysts during OER
16. Beneath the skin: nanostructure in the sub‐oxide region of liquid metal nanodroplets10.1002/adfm.202310147 ↗
17. Oxygen vacancies in oxide-derived EGaIn enhance CO2 electrochemical reduction to CO in organic electrolyte10.1016/j.apsusc.2022.155934 ↗
18. Oxidation-induced oxide shell rupture and phase separation in eutectic gallium-indium nanoparticles10.1021/acsnano.4c06764 ↗
19. Flexible two-dimensional indium tin oxide fabricated using a liquid metal printing technique10.1038/s41928-019-0353-8 ↗
20. A novel strategy of fabricated flexible ITO electrode by liquid metal ultra-thin oxide film10.1016/j.jmat.2022.05.006 ↗
21. Low-cost and scalable liquid metal printing to quickly fabricate high transparency Ga-doped ITO films10.1002/admt.202500136 ↗
22. 2D amorphous homojunction transistors exfoliated from liquid metals10.1002/adfm.202512590 ↗
23. Two-dimensional amorphous SnOx from liquid metal: mass production, phase transfer, and electrocatalytic CO2 reduction toward formic acid10.1021/acs.nanolett.0c00844 ↗
24. Direct conversion of CO2 into liquid fuels with high selectivity over a bifunctional catalyst10.1038/nchem.2794 ↗
25. Precise regulation of Ga-based liquid metal oxidation10.1021/accountsmr.1c00173 ↗
26. Ab-initio simulations of materials using VASP: density-functional theory and beyond10.1002/jcc.21057 ↗
27. Density functionals from LDA to GGA10.1016/S0927-0256(97)00206-1 ↗
28. Generalized gradient approximation made simple10.1103/PhysRevLett.77.3865 ↗
29. Structural and electronic changes in Ga-In and Ga-Sn alloys on melting10.1039/D2CP04431E ↗
30. An atomic-scale explanation for the high selectivity towards carbon dioxide reduction observed on liquid metal catalysts10.1002/anie.202407124 ↗
31. The nose–hoover thermostat10.1063/1.449071 ↗
32. Thickness dependent thermal stability of 2D gallenene10.1039/C9CC03238J ↗
33. Why do gallium clusters have a higher melting point than the bulk?10.1103/PhysRevLett.92.135506 ↗
34. Synopsys, QuantumATK (Virtual NanoLab - Atomistix ToolKit), v2017.1 (2017). https://www.synopsys.com/manufacturing/quantumatk.html (Accessed April 20, 2026).
35. Temperature-dependent XPS studies on Ga-in alloys through the melting-point10.1016/j.susc.2021.122008 ↗
36. Surface enrichment in gallium‐indium liquid alloys: applied to CO2 conversion10.1002/adfm.202316435 ↗
37. Temperature-dependent structure evolution in liquid gallium10.1016/j.actamat.2017.02.038 ↗
38. Tables of standard electrode potentials10.1149/1.2131790 ↗
39. Anodic behavior of tin, indium, and tin–indium alloys in oxalic acid solution10.1007/s10008-008-0676-2 ↗
40. Entropy of liquid metals10.1098/rspa.1991.0067 ↗
41. Density-functional-theory calculation analysis of active sites for four-electron reduction of O2 on Fe/N-doped graphene10.1021/cs501170a ↗
42. Local electronic structure modulation of interfacial oxygen vacancies promotes the oxygen activation capacity of Pt/Ce1–x Mx O2− δ10.1021/acscatal.3c06234 ↗
43. A comparative DFT study of the catalytic activity of the 3d transition metal sulphides surfaces10.1016/S0039-6028(02)02123-4 ↗
44. Prediction of enhanced catalytic activity for hydrogen evolution reaction in janus transition metal dichalcogenides10.1021/acs.nanolett.8b01335 ↗
45. Control of catalytic activity of nano-au through tailoring the fermi level of support10.1002/smll.201901789 ↗
46. Transition metal doping of Pd(1 1 1) for the NO + CO reaction10.1016/j.jcat.2018.04.025 ↗
47. Optical properties of gallium oxide clusters from first-principles calculations10.1021/jp3084474 ↗
48. Intrinsic electronic defects and multiple-atom processes in the oxidic semiconductor Ga2O310.1063/1.5010740 ↗