journal article·2026-12

Modulating mechanical properties of ultrathin electrolytic copper foils via synergistic effects of PEG, SPS and H1 additives

Haiping Yang, Meiling Liu, Zhengbing Fu, Yunfeng Guan, Xiaowen Zhang, Bihui Li, Fei Zhong, Feng Wang

Publisher page

Abstract

The demand for high-energy-density lithium-ion batteries creates an urgent need for ultra-thin copper foils with high mechanical strength. Here, a composite additive system comprising accelerator SPS, inhibitor PEG, and leveler H1 is systematically investigated using density functional theory calculations, molecular dynamics simulations, and electrochemical experiments. The suitable composite additive formulation was screened and applied to the electrodeposition of copper foils. Results indicate that oxygen atoms, disulfide bonds, and the thiazole ring serve as the primary active sites in the additives. During electrodeposition, the additive molecules adopt a nearly flat-lying configuration on the copper surface. The composite additive exhibits significantly enhanced adsorption capability compared to single components. By leveraging inter-component synergy with an optimized ratio, 6 μm-thick copper foils with tunable strength grades (standard, medium, and high strength) were successfully fabricated to meet diverse application requirements. The optimized copper foil exhibits a strong (110) preferred orientation, fine and uniform grains (0.74 μm) and a high density of geometrically necessary dislocations (GND, 9.1×10¹4 m-2), which collectively contribute to its enhanced mechanical properties: a tensile strength of 594.1 MPa and an elongation at break of 5.9%.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electrodeposition and Electroless Coatings · Copper Interconnects and Reliability · Corrosion Behavior and Inhibition

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (92)

Show source-provided references
1. Preparation of electrodeposited copper foils with ultrahigh tensile strength and elongation: a functionalized ionic liquid as the unique additive10.1016/j.cej.2024.149557 ↗
2. Advances in electrolytic copper foils: fabrication, microstructure, and mechanical properties10.1007/s12598-024-02965-6 ↗
3. Microstructure-controlled electrodeposition of mechanically reliable double-layered thin foils for secondary batteries10.1007/s12540-023-01576-7 ↗
4. Relationship between the orientation of the (100) crystal plane and elongation in ultrathin electrolytic copper foils10.1021/acs.jpcc.4c00615 ↗
5. Bromine-enhanced polarization for strengthening ultra-thin copper foil in lithium-ion battery10.1016/j.jmrt.2024.03.245 ↗
6. X. Wang, J. Lu, Y. Yang, X. Chen, Y. Xu, X. Meng, Y. Yao, J. Hu, Current status and frontiers of research on microstructure and mechanical properties of electrolytic copper foils, Chem. Eng. J. 525 (2025) 169934. http://doi.org/ 10.1016/j.cej.2025.169934.10.1016/j.cej.2025.169934 ↗
7. High-density nanotwinned copper foils electrodeposited under low temperatures for lithium-ion batteries10.1016/j.energy.2025.135241 ↗
8. Facile dynamic current deposition of high tensile gradient Cu foil with (110) preferred orientation10.1007/s40843-022-2169-1 ↗
9. High-strength copper foil prepared with 2-mercaptothiazoline by direct current electrodeposition10.1016/j.electacta.2023.143068 ↗
10. L. Yang, W. Weng, H. Zhu, X. Chi, W. Tan, Z. Wang, S. Zhong, Preparing ultra-thin copper foil as current collector for improving the LIBs performances with reduced carbon footprint, Mater. Today Commun. 35 (2023) 105952. https://doi.org/ 10.1016/j.mtcomm.2023.105952.10.1016/j.mtcomm.2023.105952 ↗
11. Simultaneous enhancement of strength and ductility with nano dispersoids in nano and ultrafine grain metals: a brief review10.1515/rams-2020-0028 ↗
12. Recent development of advanced precipitation-strengthened Cu alloys with high strength and conductivity: a review10.1016/j.pmatsci.2023.101141 ↗
13. Revealing the maximum strength in nanotwinned copper10.1126/science.1167641 ↗
14. Effect of heterogeneous microstructures on mechanical properties of thin gradient nanotwinned copper foils10.1016/j.surfcoat.2024.131381 ↗
15. Unraveling the origin of extra strengthening in gradient nanotwinned metals10.1073/pnas.2116808119 ↗
16. Effects of additives, cobalt ions, and electrolyte temperature on mechanical properties of electroplated nanotwinned Cu (Co) foils10.1016/j.matchar.2025.114780 ↗
17. One-step synthesis of sandwich-type Cu/graphene/Cu ultrathin foil with enhanced property via electrochemical route10.1016/j.matdes.2020.108629 ↗
18. M.C. Gong, R.f. Zhao, X.x. Xia, W.x. Yang, Z.l. Liu, B.k. Yan, G. Chen, S.h. Deng, Preparation of ultra‐thin copper foil for enhancing the lithium metal batteries properties by recycling waste printed circuit boards, Small Methods. 10 (2026) e02198. https://doi.org/10.1002/smtd.202502198.10.1002/smtd.202502198 ↗
19. Research progress on the texture of electrolytic copper foils10.1007/s11664-024-11118-5 ↗
20. Properties and microstructure regulation of electrodeposited ultrathin copper foil in a simple additive system10.1088/2053-1591/ad4e9e ↗
21. Copper electrocrystallization from acidic sulfate electrolyte containing MPS additive10.1007/s10800-011-0293-0 ↗
22. Rapid galvanostatic determination on levelers for superfilling in Cu electroplating10.1149/1.3265971 ↗
23. The chemistry of additives in damascene copper plating10.1147/rd.491.0003 ↗
24. Unlocking superior mechanical performance in electrolytic copper foils through synergistic competitive additives10.1021/acs.langmuir.5c04544 ↗
25. Synergistic effects of gelatin and convection on copper foil electrodeposition10.1016/j.electacta.2016.06.051 ↗
26. Trace bis-(3-sulfopropyl)-disulfide enhanced electrodeposited copper foils10.1016/j.jmst.2020.10.019 ↗
27. Temperature-dependent inhibition of PEG in acid copper plating: Theoretical analysis and experiment evidence
28. Chemical mechanism of suppression of copper electrodeposition by poly(ethylene glycol)10.1149/1.1882112 ↗
29. Regulating mechanism of thiourea additives via N-alkylation and carbon branch chain content10.1016/j.colsurfa.2025.138851 ↗
30. Inherent relationships in thiourea derivatives: effects of phenyl substitution position and linear alkyl chain length10.1016/j.electacta.2025.147652 ↗
31. Investigation into the influence of alkyl thioureas with varying steric hindrance on the tensile strength of electrolytic copper foil10.1002/admi.202500164 ↗
32. Preparation, micro-structure and characterization of high strength and low profile lithium copper foil with SPS and HP additives10.1016/j.mseb.2023.116969 ↗
33. Interactive effects of additives and electrolyte flow rate on the microstructure of electrodeposited copper foils10.1149/2.0471713jes ↗
34. Enhancing surface roughness and tensile strength of electrodeposited copper foils by composite additives10.1002/pssa.202100735 ↗
35. Effects of controlling grain growth mode on microstructures and properties of Cu foil10.1016/j.jmrt.2023.03.127 ↗
36. Evaluation of degradation of polymer additives during long-term Cu electrorefining10.2473/journalofmmij.124.626 ↗
37. Ultra-photostable small-molecule dyes facilitate near-infrared biophotonics10.1038/s41467-024-46853-0 ↗
38. Molecular dynamics simulation and DFT calculation of “green” scale and corrosion inhibitor10.1016/j.commatsci.2020.110229 ↗
39. A comparison of typical additives for copper electroplating based on theoretical computation10.1016/j.commatsci.2017.11.049 ↗
40. Computational evaluation of multifunctional nanostructured inhibitors to control microbiologically influenced corrosion: DFT calculations and MD simulations10.1007/s10800-023-01934-8 ↗
41. Diethylenetriamine functionalized graphene oxide as a novel corrosion inhibitor for mild steel in hydrochloric acid solutions10.1039/C8NJ04771E ↗
42. Absolute electronegativity and hardness: application to inorganic chemistry10.1021/ic00277a030 ↗
43. Molecular orbital theoretical studies of some organic corrosion inhibitors10.5006/1.3290294 ↗
44. Electrochemical, quantum chemical, and molecular dynamics studies on the interaction of 4-amino-4H,3,5-di(methoxy)-1,2,4-triazole (ATD), BATD, and DBATD on copper metal in 1N H2SO410.1002/maco.201005938 ↗
45. Green synthesis, electrochemical, DFT studies and MD simulation of novel synthesized thiourea derivatives on carbon steel corrosion inhibition in 1.0 M HCl10.1016/j.molstruc.2022.134567 ↗
46. An impending inhibitor useful for the oil and gas production industry: Weight loss, electrochemical, surface and quantum chemical calculation10.1038/s41598-017-13877-0 ↗
47. VMD: Visual molecular dynamics10.1016/0263-7855(96)00018-5 ↗
48. Efficient evaluation of electrostatic potential with computerized optimized code10.1039/D1CP02805G ↗
49. Physisorption or chemisorption: Insight from AI computing model based on DFT, MC/MD-simulation for prediction of MOF-based inhibitor adsorption on Cu in brine solution10.1016/j.comptc.2024.114730 ↗
50. Effect of polymer additive on structural and morphological properties of Cu-electrodeposition from an acid sulfate electrolyte: Experimental and theoretical studies10.1016/j.jelechem.2023.117722 ↗
51. Computational chemistry and electrochemical studies of adsorption behavior of organic additives during gold deposition in cyanide-free electrolytes10.1016/j.electacta.2015.06.147 ↗
52. Theoretical and experimental studies of tin electrodeposition
53. A new equation for calculation of chemical hardness of groups and molecules10.1080/00268976.2014.991771 ↗
54. Theoretical and experimental electrostatic potential around the m-nitrophenol molecule10.3390/molecules20034042 ↗
55. Quantum chemical calculations and molecular dynamics simulations to investigate the mechanism of interaction of six dye levelers with copper surface10.1016/j.jelechem.2024.118230 ↗
56. Fatty acid quaternary ammonium surfactants based on renewable resources as a leveler for copper electroplating10.1002/celc.201900116 ↗
57. Effect of functional groups on VOCs adsorption by activated carbon: DFT study10.1016/j.susc.2023.122352 ↗
58. 5-Amino-1,3,4-thiadiazole-2-thiol as a new leveler for blind holes copper electroplating: Theoretical calculation and electrochemical studies10.1016/j.apsusc.2022.154871 ↗
59. Effects of 2,2-dithiodipyridine as a leveler for through-holes filling by copper electroplating10.1149/2.0461913jes ↗
60. Influence of molecular weight of polyethylene glycol on microvia filling by copper electropolating10.1149/1.2052019 ↗
61. Theoretical studies of the additives for copper electroplating in PCB by DFT and MD simulations10.1039/D5NJ02183A ↗
62. Microvia filling by Cu electroplating over a Au seed layer modified by a disulfide10.1149/1.3078407 ↗
63. Electrodeposition of copper from sulphate and chloride solutions10.1016/0013-4686(89)87159-2 ↗
64. The electrodeposition of indium onto vitreous carbon from acidic chloride media10.1016/S0022-0728(84)80218-1 ↗
65. The role of pH and Cu(II) concentration in the electrodeposition of Cu(II) in NH4Cl solution10.1016/0022-0728(95)04278-4 ↗
66. Electrochemical nucleation. Part I General considerations10.1016/0022-0728(82)85080-8 ↗
67. Theoretical and experimental studies of multiple nucleation10.1016/0013-4686(83)85163-9 ↗
68. The effect of the Cu2+/Cu+ step on copper electrocrystallization in acid noncomplexing electrolytes10.1149/1.2755873 ↗
69. A novel strategy to electrodeposit high-quality copper foils using composite additive and pulse superimposed on direct current10.1007/s10800-020-01509-x ↗
70. Manipulating the crystallographic texture of nanotwinned Cu films by electrodeposition10.1021/cg200877f ↗
71. Controllable crystallographic texture in copper foils exhibiting enhanced mechanical and electrical properties by pulse reverse electrodeposition10.1021/acs.cgd.5b00748 ↗
72. Preparation of highly (111) textured nanotwinned copper by medium-frequency pulsed electrodeposition in an additive-free electrolyte10.1016/j.electacta.2020.137391 ↗
73. The influence of pulsed electroplating frequency and duty cycle on copper film microstructure and stress state10.1016/j.tsf.2016.11.047 ↗
74. Ultrahigh strength and high electrical conductivity in copper10.1126/science.1092905 ↗
75. Super-nano domains enable strength-conductivity synergy in copper foils10.1126/science.aed7758 ↗
76. A strategy for regulating the residual stress of electroplated Cu film based on customized grain characteristics10.1016/j.matchemphys.2025.131304 ↗
77. A dislocation density approximation for the flow stress -grain size relation of polycrystals10.1016/0956-7151(95)00031-P ↗
78. The deformation of plastically non-homogeneous materials10.1080/14786437008238426 ↗
79. Research on the anisotropy of mechanical properties for lithium-ion copper foils10.1016/j.jallcom.2025.185130 ↗
80. Effect of micromechanical properties of commercial grade electrolytic copper foils on lithium-ion batteries
81. Hall–Petch relation and boundary strengthening10.1016/j.scriptamat.2004.06.002 ↗
82. Microstructure and mechanical properties of copper microtubes fabricated via the electroforming process10.1007/s11665-020-04691-3 ↗
83. Effect of Cu ion concentration on microstructures and mechanical properties of nanotwinned Cu foils fabricated by rotary electroplating10.3390/nano11082135 ↗
84. Effect of deposition temperature on mechanical properties of nanotwinned Cu fabricated by rotary electroplating10.1016/j.msea.2021.141065 ↗
85. Superior strength and multiple strengthening mechanisms in nanocrystalline TWIP steel10.1038/s41598-018-29632-y ↗
86. Length-scale-dependent deformation mechanisms in incoherent metallic multilayered composites10.1016/j.actamat.2005.06.025 ↗
87. Tensile properties of <111>-oriented nanotwinned Cu with different columnar grain structures10.3390/ma13061310 ↗
88. Semi-brittle deformation of carrara marble: Hardening and twinning induced plasticity10.1029/2021JB022573 ↗
89. A review on copper alloys with high strength and high electrical conductivity10.1016/j.jallcom.2024.174456 ↗
90. Quantifying synergistic interactions of ternary additives for microstructural control in ultrathin Li-ion battery copper foils10.1039/D5RA06657C ↗
91. Electrical resistivity of ultrafine-grained copper with nanoscale growth twins10.1063/1.2799087 ↗
92. An electroless deposition strategy for preparing ultrathin CNTs/Cu composite foils with excellent mechanical properties10.1016/j.diamond.2021.108785 ↗