journal article·2026-12Open access

Surface stability and electrochemical behavior of additively manufactured copper in repository-relevant environments

Jeong-Hyun Woo, Gha-Young Kim, Junhyuk Jang, Seok Yoon, Young-Ho Lee, Yang-Il Jung, Younghoon Kim, Ju-Young Kim, Yakai Zhao

Abstract

The long-term stability of disposal canisters is determined by their corrosion resistance in deep geological disposal environments. This study investigates the surface stability, electrochemical behavior, and mechanical properties of wire arc additively manufactured (WAAM) Cu and Cu alloys compared with forged oxygen-free copper (OFC) in repository-relevant groundwater. Electrochemical experiments and surface characterization under aerobic and anaerobic groundwater conditions were correlated with nanoindentation results. Under aerobic conditions, all materials exhibited comparable corrosion behavior with predominantly uniform corrosion. In contrast, under anaerobic conditions, AM-Cu showed higher corrosion current densities than OFC, associated with heterogeneous surface reactions. Under sulfide-containing environment, the corrosion current density of OFC was approximately 3.5 times lower than AM-Cu, despite the formation of more continuous Cu 2 S corrosion products on AM-Cu. Polarization behavior showed a gradual increase in current density in anodic region for AM-Cu, suggesting less stable surface corrosion-product evolution than that of OFC. Nanoindentation results showed that AM-Cu possesses higher hardness and elastic modulus than OFC, suggesting a trade-off between mechanical strengthening and electrochemical stability. These findings demonstrate that process-induced heterogeneity in AM-Cu affects surface corrosion-product formation and electrochemical behavior under repository-relevant environments.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Electrodeposition and Electroless Coatings · Additive Manufacturing Materials and Processes · Nanoporous metals and alloys

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (39)

Show source-provided references
1. Overview of European concepts for high-level waste and spent fuel disposal with special reference waste container corrosion10.1016/j.jnucmat.2008.06.001 ↗
2. An evaluation of corrosion processes affecting copper-coated nuclear waste containers in a deep geological repository10.1016/j.pmatsci.2020.100766 ↗
3. An electrochemical impedance spectroscopy study of copper in a bentonite/saline groundwater environment10.1016/j.electacta.2008.04.021 ↗
4. The Swedish nuclear waste program and the long-term corrosion behaviour of copper10.1016/j.jnucmat.2008.06.025 ↗
5. Natural analogues: studies of geological processes relevant to radioactive waste disposal in deep geological repositories10.1007/s00015-015-0187-y ↗
6. Cu corrosion in supernatant and sedimentation of bentonite slurry containing chloride10.1016/j.corsci.2024.112308 ↗
7. Heterogeneous corrosion of carbon steel used for casing in deep geological radioactive waste repository in contact with claystone10.1016/j.corsci.2024.112472 ↗
8. Materials options and corrosion-related considerations in the design of spent fuel and high-level waste disposal canisters for a deep geological repository in opalinus clay10.1007/s11837-014-0876-4 ↗
9. Corrosion processes affecting copper-coated used fuel containers for the disposal of spent nuclear fuel: critical review of the state-of-knowledge10.1038/s41529-024-00540-z ↗
10. Design development of a copper-coated canister for the disposal of spent fuel in a deep geological repository in Opalinus Clay10.1080/1478422X.2017.1292200 ↗
11. The kinetics of film growth and their influence on the susceptibility to pitting of copper in aqueous sulphide solutions10.1080/1478422X.2017.1297575 ↗
12. SKB, Design analysis report for the canister, TR-10-28, (2010).
13. Wire and arc additive manufacturing: opportunities and challenges to control the quality and accuracy of manufactured parts10.1016/j.matdes.2021.109471 ↗
14. A review on advances and challenges in wire arc additive manufacturing: process parameters, microstructural evolution and material performance across alloys10.1016/j.jallcom.2025.180735 ↗
15. Elucidating the effects of metal transfer modes and investigating the material properties in wire-arc additive manufacturing (WAAM)10.1007/s40964-024-00808-5 ↗
16. Optimum strength and ductility of pure copper fabricated by wire arc additive manufacturing
17. Microstructures and corrosion properties of wire arc additive manufactured copper–nickel alloys10.3390/ma17040876 ↗
18. Microstructure, mechanical and corrosion properties of copper-nickel 90/10 alloy produced by CMT-WAAM method10.3390/ma17010050 ↗
19. Effects of environmental factors on copper corrosion in an aerobic deep geological repository10.1038/s41529-025-00722-3 ↗
20. Effect of impurity distribution on corrosion behavior of electrodeposited copper in H2O2-based slurry10.1149/1.2722562 ↗
21. Microstructure evolution in steel/copper graded deposition prepared using wire arc additive manufacturing10.1016/j.matlet.2022.133217 ↗
22. KAERI, Applicability evaluation of additive manufacturing processs for corrosion-resistant disposal canister, TR-9576, (2022).
23. SKB, Design, production and initial state of the canister, TR-10-14, (2010).
24. Corrosion behaviors of SS316L, Ti-Gr.2, Alloy 22 and Cu in KURT groundwater solutions for geological deep disposal10.1016/j.net.2022.07.024 ↗
25. Posiva, Canister evolution, Working Report 2021-06, (2021).
26. The electropolymerization of pyrrole at a CuNi electrode: corrosion protection properties10.1016/S0010-938X(03)00104-5 ↗
27. The role of Sn on the long-term atmospheric corrosion of binary Cu-Sn bronze alloys in architecture10.1016/j.corsci.2019.01.002 ↗
28. Effect of Cu addition on the electrochemical corrosion performance of Ni3Al in 1.0 M H2SO410.1155/2015/209286 ↗
29. Synthesis and anticorrosive properties of novel PVK-zro2 nano composite coatings on steel-substrate10.1380/ejssnt.2018.5 ↗
30. Potentiodynamic polarization analysis with various corrosion inhibitors on A508/IN-182/IN-52M/308L/316L welds10.1016/j.kjs.2024.100202 ↗
31. G. Astm, Standard practice for calculation of corrosion rates and related information from electrochemical measurements, G102-89, (2004).
32. NBS tables of chemical thermodynamic properties
33. KAERI, Investigation on corrosion resistance of additively manufactured copper and copper alloy layer, TR-10386, (2024).
34. The effects of chloride and sulphate on the growth of sulphide films on copper in anoxic sulphide solutions10.1002/maco.202313766 ↗
35. Kinetics of corrosion film growth on copper in neutral chloride solutions containing small concentrations of sulfide10.1149/1.3478570 ↗
36. SKB, Copper corrosion under expected conditions in a deep geologic repository, TR-02-23, (2001).
37. Progress in the understanding of the long-term corrosion behaviour of copper canisters10.1016/j.jnucmat.2013.02.080 ↗
38. Sulphide-transport control of the corrosion of copper canisters10.1080/1478422X.2017.1300363 ↗
39. Mechanisms of film growth on copper in aqueous solutions containing sulphide and chloride under voltammetric conditions10.1016/j.electacta.2014.02.050 ↗