journal article·2026-12

Silver-based infrared highly reflective stacks with well-established thermal stability at 700°C

Deng Yang, Yuzhu Huang, Hui Xiong, Ruochen Xin, Wenjing Ding, Junhua Gao, Hongtao Cao

Publisher page

Abstract

Conventional infrared reflective films are often suffered from poor long-term thermal stability and declined infrared reflectance at elevated temperatures, posing major obstacles for applications in harsh environments. To address these challenges, we developed a microalloying strategy to design a novel infrared reflective stack that achieves exceptional high-temperature stability. In this architecture, silver (Ag) is served as the base material, into which a small amount of tantalum (Ta) is introduced via magnetron co-sputtering to form a heat-resistant AgTa core layer. This core layer is then sandwiched between two WZr protective layers, resulting in a WZr/AgTa/WZr multilayer stack that effectively suppresses agglomeration and evaporation of the Ag-based layer under high temperatures. Experimental results demonstrate that this stack design significantly enhances the thermal stability of silver-based infrared reflective structures, preserving an infrared reflectance of over 95% even after vacuum annealing at 700 °C.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Thermal Radiation and Cooling Technologies · Transition Metal Oxide Nanomaterials · Metamaterials and Metasurfaces Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (44)

Show source-provided references
1. Metallic nanostructures for light trapping in energy-harvesting devices
2. Review of the spectrally selective (CSP) absorber coatings, suitable for use in SHIP10.1016/j.solmat.2022.111625 ↗
3. Opportunities and challenges for a sustainable energy future10.1038/nature11475 ↗
4. Concentrating solar power10.1021/acs.chemrev.5b00397 ↗
5. Preparation and thermal stability of AlMoON based solar selective absorption coating10.1007/s11595-024-2946-y ↗
6. Enhanced thermal stability of Mo film with low infrared emissivity by a TiN barrier layer10.1016/j.apsusc.2021.151368 ↗
7. A review of high-temperature selective absorbing coatings for solar thermal applications10.1016/j.jmat.2019.12.012 ↗
8. Spectral optimization of solar selective absorbing coating for parabolic trough receiver10.1016/j.energy.2019.06.090 ↗
9. Resistant RuO2/SiO2 absorbing sol-gel coatings for solar energy conversion at high temperature10.1021/acs.chemmater.5b00731 ↗
10. Thermal emittance of Ag films deposited by magnetron sputtering10.1016/j.vacuum.2020.109200 ↗
11. Realizing sunlight-induced efficiently dynamic infrared emissivity modulation based on aluminum-doped zinc oxide nanocrystals10.1002/advs.202405962 ↗
12. Visibly transparent and infrared reflective coatings for personal thermal management and thermal camouflage10.1002/adfm.202201432 ↗
13. The optical properties of β-FeSi2 fabricated by ion beam assisted sputtering
14. Optical absorption study of ion beam synthesized polycrystalline semiconducting FeSi210.1063/1.360167 ↗
15. Optimization of physical properties of sputtered silver films by change of deposition power for low emissivity applications10.1016/j.jallcom.2020.157073 ↗
16. Design, synthesis and thermal stability study on graded TiNxOy solar selective absorbing coating fabricated by pulsed DC reactive magnetron sputtering
17. Design of wide-angle solar-selective absorbers using aperiodic metal-dielectric stacks10.1364/OE.17.022800 ↗
18. The enhancement in microstructure, optical and electromagnetic shielding properties of Al-doped Ag thin films by annealing treatment
19. Thermal durability of solar selective absorbers consisting of β-FeSi2 with low emissive Ag layers on stainless steel10.1016/j.solmat.2019.110304 ↗
20. High-temperature solar-thermal conversion by semiconducting β-FeSi2 absorbers with thermally stabilized silver layers10.1016/j.solmat.2017.09.023 ↗
21. Refractiveindex.info database of optical constants10.1038/s41597-023-02898-2 ↗
22. Superior thermal stability in Ag/Nb multilayers by different interfacial structures10.1063/1.5138986 ↗
23. Plasmonic AgAl bimetallic alloy nanoparticle/Al2O3 nanocermet thin films with robust thermal stability for solar thermal applications10.1002/admi.201600248 ↗
24. Direct alloying of immiscible molybdenum-silver system and its thermodynamic mechanism10.1016/j.jmst.2020.04.083 ↗
25. Nanocrystalline Ag-W alloys lose stability upon solute desegregation from grain boundaries10.1016/j.actamat.2018.09.014 ↗
26. Growth and characterization of Ag-Al2O3 composites thin films for thermoelectric power generation applications10.1016/j.ceramint.2021.10.145 ↗
27. Specific phase modulation and infrared photon confinement in solar selective absorbers10.4028/b-S8Aj0Z ↗
28. High temperature optically stable spectrally-selective Ti1-xAlxN-based multilayer coating for concentrated solar thermal applications10.1016/j.solmat.2019.109964 ↗
29. Thermal stability of nanograins with grain boundary relaxation in microalloyed Cu-Sb and Cu-Fe10.1016/j.jmst.2023.01.026 ↗
30. Reflectance changes of Fe and Cr doped Ag thin films deposited by magnetron sputtering10.1016/j.tsf.2017.01.020 ↗
31. The enhancement of thermal endurance in doped low emissive ZnO/Ag/ZnO multilayer thin film10.1016/j.jallcom.2020.154983 ↗
32. Effects of Zr alloying on cohesion properties of Cu/W interfaces10.1016/j.jallcom.2015.11.154 ↗
33. Metastable structures in magnetron sputtered W-Zr thin-film alloys10.1016/j.jallcom.2021.161558 ↗
34. On thermal stability and oxidation behavior of metastable W-Zr thin- film alloys10.1016/j.jallcom.2022.166599 ↗
35. Optical properties of fourteen metals in the infrared and far infrared: Al, Co, Cu, Au, Fe, Pb, Mo, Ni, Pd, Pt, Ag, Ti, V, and W10.1364/AO.24.004493 ↗
36. Catalytic activity of bimetallic catalysts highly sensitive to the atomic composition and phase structure at the nanoscale10.1039/C5NR04535E ↗
37. High-temperature tolerance in WTi-Al2O3 cermet-based solar selective absorbing coatings with low thermal emissivity10.1016/j.nanoen.2017.05.036 ↗
38. Silver nanoparticles with an armor layer embedded in the alumina matrix to form nanocermet thin films with sound thermal stability10.1021/am502254s ↗
39. Advances and applications of atomic-resolution scanning transmission electron microscopy10.1017/S1431927621012125 ↗
40. Impact of cesium in methylammonium lead bromide perovskites: insights into the microstructures, stability and photophysical properties10.1039/C9NR02733E ↗
41. Preparation, thermophysical properties, and thermal shock resistance of Yb2O3-doped YSZ coatings10.1016/j.ceramint.2024.01.031 ↗
42. Phase stability and thermophysical properties of CeO2-Re2O3 (Re-Eu, Gd, Dy, Y, Er, Yb) co-stabilised zirconia10.1016/j.ceramint.2023.03.299 ↗
43. The structure and the properties of S-phase in AlCuMg alloys10.1016/j.actamat.2011.08.009 ↗
44. A nanoparticle-based model system for the study of heterogeneous nucleation phenomena10.1021/acs.langmuir.2c03034 ↗