journal article·2026-12

Beyond scratching in atomic force microscopy-based lithography: Nanoscale three-dimensional structuring of polymer surfaces via material extrusion

Borislav Vasić

Publisher page

Abstract

Dynamic plowing lithography (DPL) is an atomic force microscopy (AFM)-based technique used for surface structuring during tapping-mode scanning with an increased amplitude of AFM cantilever oscillations. Together with conventional AFM scratching lithography operating in contact mode, it typically produces surface grooves. Recent studies have demonstrated that DPL can also enable the formation of protrusions on polymer surfaces. However, controlled protrusion fabrication by DPL has remained largely unexplored, leaving many open questions. In this work, we use DPL to fabricate extruded, three-dimensional plateau-like structures on poly(methyl methacrylate) surfaces. We then investigate how the free oscillation amplitude of the AFM cantilever, the amplitude set-point, the feedback gain, and the scan velocity influence their morphology. Using optimized parameters, we demonstrate that the method enables the fabrication of various geometries, including polymer plateaus, stripes, crossed stripes, and wavy structures. To elucidate the physical mechanisms underlying DPL and to explore changes in the material properties of the structured polymer surface, we perform correlative measurements using phase imaging, friction force microscopy, and force modulation microscopy. Obtained results demonstrate that the controlled local extrusion of polymer material using DPL represents a distinct and largely unexplored nanofabrication pathway that may complement existing AFM-based lithographic techniques.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Force Microscopy Techniques and Applications · Nanofabrication and Lithography Techniques · Molecular Junctions and Nanostructures

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (68)

Show source-provided references
1. Nanofabrication by scanning probe microscope lithography: A review10.1116/1.1926293 ↗
2. Nanoscale Materials Patterning and Engineering by Atomic Force Microscopy Nanolithography10.1016/j.mser.2006.10.001 ↗
3. Hybrid strategies in nanolithography10.1088/0034-4885/73/3/036501 ↗
4. Nano-chemistry and scanning probe nanolithographies10.1039/B501599P ↗
5. Advanced scanning probe lithography10.1038/nnano.2014.157 ↗
6. Atomic and Close-to-Atomic Scale Manufacturing: A Review on Atomic Layer Removal Methods Using Atomic Force Microscopy10.1007/s41871-020-00067-2 ↗
7. Tip-Based Nanomachining on Thin Films: A Mini Review10.1007/s41871-021-00115-5 ↗
8. Removing Material Using Atomic Force Microscopy with Single- and Multiple-Tip Sources10.1002/smll.201100486 ↗
9. Recent advances in AFM tip-based nanomechanical machining10.1016/j.ijmachtools.2015.09.004 ↗
10. Scratch on Polymer Materials Using AFM Tip-Based Approach: A Review10.3390/polym11101590 ↗
11. Friction-Induced Nanofabrication: A Review10.1186/s10033-021-00550-x ↗
12. Towards understanding the machining mechanism of the atomic force microscopy tip-based nanomilling process10.1016/j.ijmachtools.2021.103701 ↗
13. Crafting at the nanoscale: A comprehensive review of mechanical Atomic force microscopy-based lithography methods and their evolution10.1016/j.matdes.2024.113036 ↗
14. Thermal scanning probe lithography - a review10.1038/s41378-019-0124-8 ↗
15. A review on principles and applications of scanning thermal microscopy (sthm)
16. Thermal scanning probe lithography10.1038/s43586-022-00110-0 ↗
17. Silicon surface nano-oxidation using scanning probe microscopy10.1016/j.progsurf.2006.01.003 ↗
18. Advanced oxidation scanning probe lithography10.1088/1361-6528/aa5651 ↗
19. Development of Dip-Pen Nanolithography (DPN) and Its Derivatives
20. Evolution of Dip-Pen Nanolithography (DPN): From Molecular Patterning to Materials Discovery10.1021/acs.chemrev.9b00725 ↗
21. Scratching the Surface: Fundamental Investigations of Tribology with Atomic Force Microscopy10.1021/cr960068q ↗
22. A comparison study of scratch and wear properties using atomic force microscopy10.1016/j.apsusc.2010.02.010 ↗
23. Nanoscale wear of graphene and wear protection by graphene10.1016/j.carbon.2017.05.036 ↗
24. In situ thickness measurements of ultra-thin multilayer polymer films by atomic force microscopy10.1088/0957-4484/10/4/305 ↗
25. Thickness measurement of thin films using atomic force microscopy based scratching10.1088/2051-672X/ad54de ↗
26. Interfacial friction obtained by lateral manipulation of nanoparticles using atomic force microscopy techniques10.1063/1.2798628 ↗
27. Structural Lubricity under Ambient Conditions10.1038/ncomms12055 ↗
28. Molecules on rails: friction anisotropy and preferential sliding directions of organic nanocrystallites on two-dimensional materials10.1039/C8NR04865G ↗
29. Fabrication of Periodic Nanostructures Using AFM Tip-Based Nanomachining: Combining Groove and Material Pile-Up Topographies10.1016/j.eng.2018.09.010 ↗
30. Orientational Ordering of Polymers by Atomic Force Microscope Tip-Surface Interaction10.1126/science.255.5040.64 ↗
31. Scan-Induced Patterning in Glassy Polymer Films: Using Scanning Force Microscopy To Study Plastic Deformation at the Nanometer Length Scale10.1021/la015769j ↗
32. Nanowear of polystyrene surfaces: molecular entanglement and bundle formation10.1088/0957-4484/16/6/009 ↗
33. AFM tip-induced ripple pattern on AIII-BV semiconductor surfaces10.1016/j.apsusc.2008.02.067 ↗
34. Effects of the AFM tip trace on nanobundles formation on the polymer surface10.1016/j.apsusc.2012.06.005 ↗
35. Surface rippling induced by periodic instabilities on a polymer surface10.1088/1367-2630/17/3/032001 ↗
36. Nanoscale rippling on polymer surfaces induced by AFM manipulation10.3762/bjnano.6.234 ↗
37. Locking effects in plowing-induced nanorippling of polystyrene surfaces10.1016/j.apsusc.2022.153467 ↗
38. Tribonanolithography of silicon in aqueous solution based on atomic force microscopy10.1063/1.1773620 ↗
39. Nanoprocessing of silicon by mechanochemical reaction using atomic force microscopy and additional potassium hydroxide solution etching10.1088/0957-4484/16/1/029 ↗
40. Effect of nanoscratch conditions on both deformation behavior and wet-etching characteristics of silicon (100) surface10.1016/j.wear.2005.11.007 ↗
41. Friction-induced nanofabrication on monocrystalline silicon10.1088/0957-4484/20/46/465303 ↗
42. High-Aspect-Ratio Structure Fabrication on (110)-Oriented Silicon Surfaces Using Tribo-Nanolithography10.1166/jnn.2010.2158 ↗
43. Fabrication mechanism of friction-induced selective etching on Si(100) surface10.1186/1556-276X-7-152 ↗
44. Low-damage direct patterning of silicon oxide mask by mechanical processing10.1186/1556-276X-9-269 ↗
45. Site-controlled fabrication of silicon nanotips by indentation-induced selective etching10.1016/j.apsusc.2017.07.047 ↗
46. Role of mechanically-driven distorted microstructure in mechanochemical removal of silicon10.1016/j.apsusc.2020.146337 ↗
47. Maskless and low-destructive nanofabrication on quartz by friction-induced selective etching10.1186/1556-276X-8-140 ↗
48. Maskless micro/nanofabrication on GaAs surface by friction-induced selective etching10.1186/1556-276X-9-59 ↗
49. Rapid nanofabrication via UV-assisted selective etching on GaAs without templates10.1016/j.cplett.2019.01.007 ↗
50. Nanolithography with an Atomic Force Microscope for Integrated Fabrication of Quantum Electronic Devices10.1063/1.112914 ↗
51. Nanolithography with an Atomic Force Microscope by Means of Vector-Scan Controlled Dynamic Plowing10.1063/1.369761 ↗
52. Dynamic Plowing Nanolithography on Polymethylmethacrylate using an Atomic Force Microscope10.1063/1.1326053 ↗
53. Comparison Between Dynamic Plowing Lithography and Nanoindentation methods10.1063/1.1421632 ↗
54. Nanoscale Devices Fabricated by Dynamic Ploughing with an Atomic Force Microscope10.1006/spmi.2002.1022 ↗
55. Fabrication of none-ridge nanogrooves with large-radius probe on PMMA thin-film using AFM tip-based dynamic plowing lithography approach10.1016/j.jmapro.2017.07.016 ↗
56. Fabrication of Nanoscale Pits with High Throughput on Polymer Thin Film Using AFM Tip-Based Dynamic Plowing Lithography10.1186/s11671-017-2319-y ↗
57. Fabrication of periodic nanostructures using dynamic plowing lithography with the tip of an atomic force microscope10.1016/j.apsusc.2017.08.134 ↗
58. Periodic nanostructures on single-crystal copper for SERS substrate fabricated by using AFM dynamic lithography10.1016/j.vacuum.2023.112595 ↗
59. On the machinability threshold of dynamic lithography10.1016/j.jmrt.2025.07.240 ↗
60. Atomic force microscopy based manipulation of graphene using dynamic plowing lithography
61. Nanometer-scale layer modification of polycarbonate surface by scratching with tip oscillation using an atomic force microscope10.1016/S0043-1648(03)00311-9 ↗
62. Characterization study on machining PMMA thin-film using AFM tip-based dynamic plowing lithography10.1002/sca.21308 ↗
63. The effects of feedback control parameters on the formation of protuberances in poly(methyl methacrylate) by dynamic plowing lithography10.1016/j.precisioneng.2023.02.012 ↗
64. Atomic-scale protuberance induced by AFM dynamic lithography10.1016/j.ijmecsci.2025.110451 ↗
65. Identification of Nanoscale Dissipation Processes by Dynamic Atomic Force Microscopy10.1103/PhysRevLett.97.016103 ↗
66. Gwyddion: an open-source software for SPM data analysis10.2478/s11534-011-0096-2 ↗
67. Demystifying data evaluation in the measurement of periodic structures10.1088/1361-6501/acbab3 ↗
68. Nanoscale mechanical characterization of PMMA by AFM nanoindentation: a theoretical study on the time-dependent viscoelastic recovery10.1007/s10853-013-7138-7 ↗