Atomistic investigation of the effect of crystallographic orientation of Ag interposer in Cu–Cu diffusion bonding: a molecular dynamics study
Source abstract
Abstract
Cu–Cu diffusion bonding is a key enabling technology for fine-pitch interconnects in three-dimensional (3D) integration, but achieving reliable bonding within limited thermal budgets remains challenging due to the native oxide of Cu and its relatively low self-diffusivity. In this work, we performed molecular dynamics (MD) simulations on Cu–Ag/Ag–Cu sandwich structures with different Ag surface orientations under thermocompressive bonding at 473–773 K, followed by uniaxial tensile and shear deformation tests. Simulation results reveal that the extent of Cu–Ag interdiffusion follows the order Ag(110) > Ag(100) > Ag(111), consistent with the increasing atomic packing density of the Ag surfaces. This orientation-dependent intermixing leads to a distinct mechanical anisotropy. For tensile deformation, the thick, amorphous interlayer formed by Ag(110) acts as a structural weak point, yielding a descending order of tensile strength: Ag(111) > Ag(100) > Ag(110). Meanwhile, this same interlayer provides the most effective barrier against shear deformation by suppressing coherent planar sliding, resulting in the opposite order. Ultimately, these results demonstrate that each orientation optimizes distinct mechanical properties, providing orientation-aware design guidance for Ag-mediated Cu–Cu bonding.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: 3D IC and TSV technologies · Electronic Packaging and Soldering Technologies · Copper Interconnects and Reliability
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (48)
Show source-provided references
1. IEEE Heterogeneous Integration Roadmap (HIR), Chapter 22: 2D and 3D Packaging, 2024. https://eps.ieee.org/wp-content/uploads/2025/11/HIR_2024_ch22_2D-3D.pdf (accessed April 23, 2026).
2. Lau · 2021
3. Integration schemes and enabling technologies for three-dimensional integrated circuits10.1049/iet-cdt.2009.0127 ↗
4. Physical mechanisms of copper-copper wafer bonding10.1063/1.4932146 ↗
5. Cu–Cu diffusion bonding enhancement at low temperature by surface passivation using self-assembled monolayer of alkane-thiol10.1063/1.3263154 ↗
6. Effects of surface roughness and bonding pressure on Cu direct bonding: a molecular dynamics study10.1021/acs.jpcc.5c03816 ↗
7. Oxidation resistive, CMOS compatible copper-based alloy ultrathin films as a superior passivation mechanism for achieving 150 °C Cu–Cu wafer on wafer thermocompression bonding10.1109/TED.2017.2653188 ↗
8. Cu passivation for enhanced low temperature (≤300 °C) bonding in 3D integration10.1016/j.mee.2013.01.032 ↗
9. Instant Cu-to-Cu direct bonding enabled by <111>-oriented nanotwinned Cu bumps
10. Molecular dynamics simulation of the direct bonding of (1 1 1)-oriented nanotwinned Cu and its related mechanical behavior10.1016/j.jpcs.2024.111872 ↗
11. Molecular dynamics simulation study of Zr interposer promoting Cu-Cu low-temperature hybrid bonding
12. Novel Cu-to-Cu bonding with Ti passivation at 180 °C in 3-D integration10.1109/LED.2013.2285702 ↗
13. Electrical and reliability investigation of Cu-to-Cu bonding with silver passivation layer in 3-D integration10.1109/TCPMT.2020.3037365 ↗
14. The effect of an Ag nanofilm on low-temperature Cu/Ag-Ag/Cu chip bonding in air10.3390/app11209444 ↗
15. Electroless-deposition of epitaxial (1 1 1)-oriented silver on nanotwinned copper microbumps for metal direct bonding10.1016/j.jmrt.2023.11.241 ↗
16. Impact of crystalline orientation on Cu–Cu solid-state bonding behavior by molecular dynamics simulations10.1038/s41598-023-50427-3 ↗
17. Molecular dynamics simulation study on the tensile deformation behavior of nanotwinned Cu-Ag alloy
18. Molecular dynamics study of grain size effects on interfacial voids in Cu-Cu diffusion bonding10.1016/j.apsusc.2025.165145 ↗
19. Atomistic mechanisms and dynamics of adhesion, nanoindentation, and fracture10.1126/science.248.4954.454 ↗
20. Atomistic simulations of dynamics of an edge dislocation and its interaction with a void in copper: a comparative study10.1088/1361-651X/ab8358 ↗
21. Allen · 2017
22. LAMMPS - a flexible simulation tool for particle-based materials modeling at the atomic, meso, and continuum scales10.1016/j.cpc.2021.108171 ↗
23. Embedded-atom method: Derivation and application to impurities, surfaces, and other defects in metals10.1103/PhysRevB.29.6443 ↗
24. An embedded-atom potential for the Cu–Ag system10.1088/0965-0393/14/5/002 ↗
25. Hultgren · 1971
26. Canonical dynamics: equilibrium phase-space distributions10.1103/PhysRevA.31.1695 ↗
27. Polymorphic transitions in single crystals: a new molecular dynamics method10.1063/1.328693 ↗
28. Visualization and analysis of atomistic simulation data with OVITO–the open visualization tool10.1088/0965-0393/18/1/015012 ↗
29. Convergence and equilibrium in molecular dynamics simulations10.1038/s42004-024-01114-5 ↗
30. The surface energy of metals10.1016/S0039-6028(98)00363-X ↗
31. Shape and surface structure of gold nanoparticles under oxidizing conditions10.1103/PhysRevB.77.094127 ↗
32. Solid-state bonding behavior between surface-nanostructured Cu and Au: a molecular dynamics simulation10.1038/s41598-022-17119-w ↗
33. Meyers · 2008
34. Effect of direct current stressing to Cu–Cu bond interface imperfection for three dimensional integrated circuits10.1016/j.mee.2013.01.020 ↗
35. Temperature and duration effects on microstructure evolution during copper wafer bonding10.1007/s11664-003-0103-5 ↗
36. Structure identification methods for atomistic simulations of crystalline materials10.1088/0965-0393/20/4/045021 ↗
37. Molecular dynamics study of melting and freezing of small Lennard-Jones clusters10.1021/j100303a014 ↗
38. Elementary mechanisms of shear-coupled grain boundary migration10.1103/PhysRevLett.110.265507 ↗
39. Coupling grain boundary motion to shear deformation10.1016/j.actamat.2006.08.004 ↗
40. Dislocation nucleation mechanisms from fcc/bcc incoherent interfaces10.1016/j.scriptamat.2011.09.008 ↗
41. Strength and plasticity of nanolaminated materials10.1080/21663831.2016.1225321 ↗
42. Recent advances and trends in advanced packaging10.1109/TCPMT.2022.3144461 ↗
43. Bumpless interconnect through ultrafine Cu electrodes by means of surface-activated bonding (SAB) method10.1109/TADVP.2006.873138 ↗
44. Room temperature Cu–Cu direct bonding using surface activated bonding method10.1116/1.1537716 ↗
45. Molecular dynamics (MD) simulation of uniaxial tension of some single-crystal cubic metals at nanolevel10.1016/S0020-7403(01)00043-1 ↗
46. Probing the limits of metal plasticity with molecular dynamics simulations10.1038/nature23472 ↗
47. In-situ measurement of self-atom diffusion in solids using amorphous germanium as a model system10.1038/s41598-018-35915-1 ↗
48. A study of diffusion, atom migration and segregation in Cu and Ag alloy bulk- and nanocrystals10.1063/1.4983083 ↗