Surface cleaning and activation of aluminum and stainless steel by atmospheric-pressure Ar, Ar-N2 and Ar-N2O plasmas
Source abstract
Abstract
In this study it was investigated the use of Ar, Ar–N 2 , and Ar–N 2 O discharges and afterglows for cleaning and activating commercial aluminum and stainless steel surfaces. The impact of exposing the postdischarges to the surrounding atmosphere on the emission spectra has been investigated, revealing a deactivation of the kinetic mechanisms caused by air entrance. The influence of gas composition and the plasma region used during treatment on the wettability and the surface free energy has been analyzed by means of the Owens-Wendt method, with sessile drop tests employing water and ethylene glycol. A significant increase in the wettability has been noted in the treated samples, even reaching ethylene glycol superwettability, together with a high increase in the surface free energy after both discharge and postdischarge exposure. Confocal Microscopy ruled out physical modifications to surface topography as the cause of these changes. X-ray Photoelectron Spectroscopy analysis of the treated surfaces revealed that the increase in wettability and surface free energy resulted from plasma-induced alterations in surface chemical composition. Specifically, the removal of C―C/C―H bonds and the increase in the surface oxygen concentration were found to drive these improvements.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Metal and Thin Film Mechanics · Plasma Applications and Diagnostics · Plasma Diagnostics and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (94)
Show source-provided references
1. Aluminum oxide barrier coatings on polymer films for food packaging applications10.1016/j.surfcoat.2013.08.011 ↗
2. Electrochemical fabrication of superhydrophobic passive films on aeronautic steel surface10.1016/j.colsurfa.2019.04.033 ↗
3. A comparative study of 5083 aluminium alloy and 316L stainless steel for shipbuilding material10.1016/j.matpr.2020.04.641 ↗
4. Aluminum alloys in marine construction: characteristics, application, and problems from a fabrication viewpoint10.1007/s40868-019-00069-w ↗
5. A review of current collectors for lithium-ion batteries10.1016/j.jpowsour.2020.229321 ↗
6. A review on dissimilar laser welding of steel-copper, steel-aluminum, aluminum-copper, and steel-nickel for electric vehicle battery manufacturing10.1016/j.optlastec.2021.107595 ↗
7. Development of a lightweight, large-scale stainless-steel plate heat pipe (SPHP) fin for enhanced cooling in high-power electronics10.1007/s12206-024-0847-9 ↗
8. Brandes · 1992
9. Steels in additive manufacturing: a review of their microstructure and properties10.1016/j.msea.2019.138633 ↗
10. Auswirkungen der EU-Richtlinie 93/7/EWG über die Rückgabe illegal verbrachten Kulturgutes auf den schweizerischen Kunsthandel10.15542/KUR/2008/3-4/6 ↗
11. Graphene oxide as a corrosion inhibitor for the aluminum current collector in lithium ion batteries10.1016/j.carbon.2012.09.013 ↗
12. Metal bipolar plates for PEM fuel cell—A review10.1016/j.jpowsour.2006.09.088 ↗
13. Dielectric barrier discharge—properties and applications10.1016/S0040-6090(01)00956-7 ↗
14. Improving the wettability of 2024 aluminium alloy by means of cold plasma treatment10.1016/S0169-4332(03)00359-3 ↗
15. Non-thermal plasma treatment of textiles10.1016/j.surfcoat.2007.12.027 ↗
16. Atmospheric air plasma jet for improvement of paint adhesion to aluminium surface in industrial applications10.1016/j.ijadhadh.2020.102554 ↗
17. Interlayer design for strong adhesion in the double-layer flexible copper clad laminate via HiPIMS deposition10.1016/j.apsusc.2024.160697 ↗
18. Use of high temperature pulsed plasma fluxes in modification of metal materials10.1016/S0257-8972(97)00092-3 ↗
19. Novel low-cost approach for removal of surface contamination before texturization of commercial monocrystalline silicon solar cells10.1016/j.solmat.2007.03.025 ↗
20. Corona versus low pressure plasma treatment: effect on surface properties and adhesion of polymers10.1080/00218469308026573 ↗
21. Surface cleaning by plasma-enhanced desorption of contaminants (PEDC)10.1016/S0257-8972(98)00777-4 ↗
22. Low pressure plasma treatment for improving the strength and durability of adhesively bonded aluminium joints10.1016/S0257-8972(03)00427-4 ↗
23. Surface modification of metal substrates using dielectric barrier discharge plasma and the wettability study10.1016/j.jtice.2022.104467 ↗
24. Atmospheric pressure plasma treatment and following aging effect of chromium surfaces
25. Air DCSBD plasma treatment of Al surface at atmospheric pressure10.1016/j.surfcoat.2011.12.039 ↗
26. Influence of humidity on atmospheric pressure air plasma treatment of aluminium surfaces10.1016/j.apsusc.2012.02.040 ↗
27. Atmospheric pressure plasma treatment of flat aluminum surface10.1016/j.apsusc.2015.01.030 ↗
28. Aluminum surface treatment using three different plasma-assisted dry chemical processes10.1109/TIA.2004.834127 ↗
29. Treatment of metal surface by atmospheric microwave plasma jet10.1109/TPS.2006.876486 ↗
30. Surface treatment by atmospheric-pressure surfatron jet10.1109/TPS.2012.2208767 ↗
31. Aluminum metal surface cleaning and activation by atmospheric-pressure remote plasma10.1016/j.apsusc.2017.02.092 ↗
32. RF plasma cleaning of silicon substrates with high-density polyethylene contamination10.7567/JJAP.57.01AB04 ↗
33. Spatial distribution of wettability in aluminum surfaces treated with an atmospheric-pressure remote-plasma10.3390/met9090937 ↗
34. Atmospheric pressure microwave plasma for aluminum surface cleaning10.1116/1.5132912 ↗
35. Wettability distribution on the surface treated by plasma jet at different flow rates for microfluidic applications10.1109/TPS.2020.3012830 ↗
36. M. Moisan, P. Leprince, C. Beaudry, E. Bloyet, Perfectionnements apportés aux dispositifs d’excitation par des ondes HF d’une colonne de gaz enfermée dans une enveloppe, 1974.
37. Spectroscopic study of Ar-N2 spatial postdischarges sustained in atmospheric-pressure microwave plasmas10.1002/ppap.202400181 ↗
38. Ar-N2O microwave plasmas and afterglows sustained at atmospheric pressure10.1007/s11090-026-10647-7 ↗
39. Atmospheric-pressure Microwave Induced Plasmas (MIPs): from low-temperature treatments to the synthesis of valuable byproducts
40. Microwave N2–Ar plasma torch. I. Modeling
41. Quantifying plasma immersion ion implantation of insulating surfaces in a dielectric barrier discharge: how to control the dose10.1098/rspa.2018.0263 ↗
42. Study on plasma cleaning of surface contaminants on pure copper10.1088/2053-1591/acac61 ↗
43. Direct laser metal deposition additive manufacturing of Inconel 718 superalloy: Statistical modelling and optimization by design of experiments10.1016/j.optlastec.2021.107380 ↗
44. A novel post-weld treatment using nanostructured metallic multilayer for superior fatigue strength10.1038/s41598-023-49192-0 ↗
45. Rudawska · 2019
46. A snake-based approach to accurate determination of both contact points and contact angles10.1016/j.colsurfa.2006.03.008 ↗
47. NIH image to ImageJ: 25 years of image analysis10.1038/nmeth.2089 ↗
48. Synthesis and characterization of PMMA-based superhydrophobic surfaces10.1007/s00396-011-2531-8 ↗
49. Effect of moisture exposure on scratch behavior of model polyurethane elastomers10.1016/j.polymer.2018.01.003 ↗
50. Estimation of the surface free energy of polymers10.1002/app.1969.070130815 ↗
51. Synthesis of flat sticky hydrophobic carbon diamond-like films using atmospheric pressure Ar/CH4 dielectric barrier discharge10.1063/1.4953684 ↗
52. Resistance of solid surfaces to wetting by water10.1021/ie50320a024 ↗
53. Increase of wettability of soft- and hardwoods using microwave plasma10.1016/j.ijadhadh.2013.05.003 ↗
54. Rapid surface treatment of polyamide 12 by microwave plasma jet10.1016/j.apsusc.2013.10.016 ↗
55. Stability of plasma treated superhydrophobic surfaces under different ambient conditions10.1016/j.jcis.2016.02.058 ↗
56. Determination of the concentration of surface hydroxyl groups on metal oxide films by a quantitative XPS method10.1002/(SICI)1096-9918(199807)26:8<549::AID-SIA396>3.0.CO;2-Q ↗
57. Analysis of plasma degreased aluminium foil with XPS10.1179/1743294413Y.0000000129 ↗
58. High nitrogen atom yield downstream of an atmospheric pressure flowing Ar-N2 microwave discharge10.1088/0953-4075/21/18/006 ↗
59. The production of active plasma species for surface treatments10.1088/0022-3727/30/16/002 ↗
60. Atmospheric pressure Ar-N2 surface-wave discharge morphology10.1109/TPS.2011.2160736 ↗
61. Spectroscopic characterization of argon–nitrogen surface-wave discharges in dielectric tubes at atmospheric pressure10.1007/s11090-015-9647-4 ↗
62. M.C. García, C. Yubero, M.D. Calzada, M.P. Martínez-Jiménez, Spectroscopic characterization of two different microwave (2.45 GHz) induced argon plasmas at atmospheric pressure, Appl. Spectrosc. 59(4) (2005) 519–528. Doi: 10.1366/0003702053641405.10.1366/0003702053641405 ↗
63. Study on the reforming of alcohols in a surface wave discharge (SWD) at atmospheric pressure10.1088/0022-3727/41/17/175201 ↗
64. Spectroscopic characterization of atmospheric pressure argon plasmas sustained with the Torche à Injection Axiale sur Guide d'Ondes10.1016/j.sab.2012.12.006 ↗
65. Experimental characterization of TIAGO torch discharges: surface wave discharge behavior and (post-)discharge kinetics10.1088/1361-6595/acd3a8 ↗
66. The effect of argon admixing on nitriding of plain carbon steel in N2 and N2-H2 plasma10.1016/j.surfcoat.2018.07.004 ↗
67. Study of late argon–nitrogen post-discharge interactions with oxidized iron surfaces10.1016/S0169-4332(99)00358-X ↗
68. Role of active species in surface cleaning by an Ar-N2 atmospheric pressure post-discharge10.1088/0022-3727/35/16/304 ↗
69. Bacterial spore inactivation by atmospheric-pressure plasmas in the presence or absence of UV photons as obtained with the same gas mixture10.1088/0022-3727/39/16/S07 ↗
70. Analysis of the N2O dissociation by rf discharges in a plasma reactor10.1016/S0257-8972(99)00287-X ↗
71. High NV density in a pink CVD diamond grown with N2O addition10.1016/j.carbon.2020.08.048 ↗
72. Influence of free energy on the attachment of Salmonella Enteritidis and Listeria monocytogenes on stainless steels AISI 304 and AISI 316, LWT-Food
73. Fabrication of biomimetic anisotropic super-hydrophobic surface with rice leaf-like structures by femtosecond laser10.1016/j.optmat.2020.110740 ↗
74. Thermal analysis of lithium-ion battery of electric vehicle using different cooling medium10.1016/j.apenergy.2024.122781 ↗
75. Surface characteristics of AISI 304L stainless steel after an atmospheric pressure plasma treatment10.1016/j.surfcoat.2004.07.071 ↗
76. Low-temperature plasma treatment of aluminum for improved surface bonding10.1007/s11665-023-08082-2 ↗
77. Enhancing wetting and adhesion of stainless steel (SS304) surfaces with dielectric barrier discharge (DBD) plasma jet treatment10.1016/j.apsusc.2024.161515 ↗
78. Effects of surface topography at different scales on the dispersion of the wetting data for sessile water droplets on nitrided austenitic stainless steels10.1016/j.surfcoat.2022.128510 ↗
79. Tailored surface energy of stainless steel plate coupons to reduce the adhesion of aluminium silicate deposit10.1016/j.fuel.2016.04.105 ↗
80. Control of glass surface wettability via esterification with n-alkyl alcohols
81. Atmospheric plasma torch treatment of aluminium: improving wettability with silanes10.1016/j.apsusc.2013.09.138 ↗
82. Geometrical characterization of electrospun nanofibers
83. Protective and non-protective oxide formation on 304 stainless steel10.1016/0378-5963(81)90061-1 ↗
84. Analysis of oxide layers on stainless steel (304, and 316) by conversion electron Mössbauer spectrometry10.1007/BF01045379 ↗
85. Surface and electrochemical characterization of pitting corrosion behaviour of 304 stainless steel in ground water media10.1007/s10800-006-9274-0 ↗
86. ThermoFisher Scientific, Iron X-ray photoelectron spectra, iron electron configuration, and other elemental information. https://www.thermofisher.com/es/es/home/materials-science/learning-center/periodic-table/transition-metal/iron.html (accessed August 2024).
87. NIST X-ray Photoelectron Spectroscopy Database (SRD 20), Version 5.0. https://srdata.nist.gov/xps/QueryByElmType/Al/PE (accessed August 2024).
88. Surface reaction during thermal atomic layer etching of aluminum oxide films using fluorine radicals and trimethylaluminum10.1016/j.apsusc.2023.158453 ↗
89. Scalable graphene production from ethanol decomposition by microwave argon plasma torch
90. Optimizing high-quality graphene nanoflakes production through organic (bio)-precursor plasma decomposition10.1016/j.fuproc.2020.106630 ↗
91. Increasing the production of high-quality graphene nanosheet powder: the impact of electromagnetic shielding of the reaction chamber on the TIAGO torch plasma approach10.1016/j.cej.2024.155088 ↗
92. Plasma cleaning and the removal of carbon from metal surfaces10.1016/0040-6090(80)90588-X ↗
93. Effect of hydrocarbon adsorption on the wettability of rare earth oxide ceramics10.1063/1.4886410 ↗
94. Surface cleaning and passivation of an iron foil by a nitrogen post-discharge surface treatment10.1016/S0257-8972(01)01116-1 ↗