journal article·2026-12Open access

Three-dimensionally ordered macroporous MgO on NiO-CeO2 nanoparticles for the integrated CO2 capture and methanation

Arantxa Davó-Quiñonero, Iván Martínez-López, José Berenguer-López, Iris Martín-García, Dolores Lozano-Castelló, Agustín Bueno-López

Abstract

Integrated CO 2 capture and methanation using dual-function materials (DFMs) offers a route for the direct conversion of diluted CO 2 streams into synthetic methane. In this work, novel DFMs consisting of NiO-CeO 2 nanoparticles combined with three-dimensionally ordered macroporous (3DOM) MgO were prepared using a polymethyl methacrylate (PMMA) hard-templating method. The influence of MgO loading and structure on CO 2 capture and methanation performance was investigated and compared with a non-templated MgO reference. MgO incorporation increased the CO 2 uptake capacity, reaching 120 μmol CO 2 g −1 at 200 °C for the 30% 3DOM material, but partially reduced the intrinsic methanation activity of the NiO-CeO 2 phase. Nevertheless, the 3DOM architecture outperformed the corresponding reference material at the same MgO loading, demonstrating the beneficial role of the ordered macroporous structure. X-ray photoelectron spectroscopy (XPS) and H 2 temperature-programmed reduction (H 2 -TPR) showed that MgO does not significantly modify the electronic properties of the NiO-CeO 2 nanoparticles. The results show that the balance between CO 2 adsorption and catalytic conversion is strongly influenced by the MgO structure, with the 30% 3DOM material providing the best overall compromise between CO 2 capture and methanation performance. Integrated capture-methanation performance remained stable over two consecutive cycles. These results highlight the potential of these materials for integrated CO 2 capture and methanation applications.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Catalysts for Methane Reforming · Carbon Dioxide Capture Technologies · Chemical Looping and Thermochemical Processes

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (50)

Show source-provided references
1. Recent progress in integrated CO2 capture and conversion process using dual function materials: a state-of-the-art review
2. Dual function materials for CO2 capture and conversion using renewable H210.1016/j.apcatb.2014.12.025 ↗
3. Taking dual function materials (DFM) from the laboratory to industrial applications: a review of DFM operation under realistic integrated CO2 capture and utilization conditions
4. CO2 utilization with a novel dual function material (DFM) for capture and catalytic conversion to synthetic natural gas: an update10.1016/j.jcou.2016.05.003 ↗
5. Enhancing the CO2 adsorption capacity of γ-Al2O3 supported alkali and alkaline-earth metals: impacts of dual function material (DFM) preparation methods10.1021/acs.iecr.2c00364 ↗
6. Effect of Na/Ca adsorbents on NiRu-DFM performance for integrated CO2 capture and hydrogenation10.1021/acs.energyfuels.4c02601 ↗
7. Mechanochemical synthesis of Ni/MgO dual functional materials at room temperature for CO2 capture and methanation10.1016/j.cej.2024.148599 ↗
8. Investigation of DFMs for CO2 capture and methanation by coupled microreactor experiments and FT-IR spectroscopy10.1021/acs.energyfuels.3c00443 ↗
9. Fuel from air: NiO-CeO2 nanoparticles, MgO and beta zeolite dual function materials for direct CO2 capture and hydrogenation to CH410.1016/j.fuel.2025.135549 ↗
10. Preparation of superhydrophilic adsorbents with 3DOM structure by water-soluble colloidal crystal templates for boron removal from natural seawater10.1021/acsami.8b11763 ↗
11. Fabrication of three-dimensional ordered macroporous/mesoporous magnesium oxide for efficient cadmium removal10.1016/j.ceramint.2021.04.301 ↗
12. Evidence of synergistic effect in spinel-type Co-Mn mixed oxides supported on 3DOM-Al2O3 in the catalytic oxidation reaction of toluene10.1016/j.apsusc.2025.163736 ↗
13. g-C3N4 templated synthesis of 3DOM SnO2/CN enriched with oxygen vacancies for superior NO2 gas sensing10.1016/j.apsusc.2022.154618 ↗
14. Nd-doped MgO-based adsorbent performance for CO2 capture
15. Biomass ash stabilized MgO adsorbents for CO2 capture application
16. Polarization of CO2 for improved CO2 adsorption by MgO and Mg(OH)210.1016/j.apsusc.2021.150187 ↗
17. Mechanism of CO2 adsorption on point-defective MgO surfaces: first-principles study10.1016/j.apsusc.2022.154647 ↗
18. Recent advances in CO2 capture using MgO-based nanomaterials: a comprehensive review
19. Prospects of MgO-based sorbents for CO2 capture applications at high temperatures
20. General approach to facile synthesis of MgO-based porous ultrathin nanosheets enabling high-efficiency CO2 capture
21. Synthesis of mesoporous MgO–CeO2 composites with enhanced CO2 capture rate via controlled combustion10.1016/j.micromeso.2019.109587 ↗
22. Active, selective and stable NiO-CeO2 nanoparticles for CO2 methanation10.1016/j.fuproc.2020.106637 ↗
23. Ionic nickel embedded in ceria with high specific CO2 methanation activity10.1002/anie.202302087 ↗
24. On the soot combustion mechanism using 3DOM ceria catalysts10.1016/j.apcatb.2018.04.023 ↗
25. Improved CO oxidation activity of 3DOM Pr-doped ceria catalysts: something other than an ordered macroporous structure10.3390/catal7020067 ↗
26. Preparation and formation mechanism of three-dimensionally ordered macroporous (3DOM) MgO, MgSO4, CaCO3, and SrCO3, and photonic stop band properties of 3DOM CaCO310.1016/j.jssc.2011.06.028 ↗
27. Self-assembled 3DOM macro-/mesoporous TiO2 photoanode for dye-sensitized solar cells10.1016/j.apsusc.2017.12.221 ↗
28. Physisorption of gases, with special reference to the evaluation of surface area and pore size distribution (IUPAC Technical Report)10.1515/pac-2014-1117 ↗
29. Lattice variation as a function of concentration and grain size in MgO–NiO solid solution system10.1016/j.heliyon.2024.e31275 ↗
30. Lattice expansion in metal oxide nanoparticles: MgO, Co3O4, & Fe3O410.1111/jace.14478 ↗
31. Size dependence of lattice parameter and electronic structure in ceo2 nanoparticles10.1021/acs.inorgchem.0c00506 ↗
32. Effects of MgO additions on the electrical conduction behavior of a CeO2-based electrolyte prepared by SPS process10.1016/j.ceramint.2019.12.228 ↗
33. The synergy of Ni doping and oxygen vacancies over CeO2 in visible light-assisted thermal catalytic methanation reaction10.1016/j.apsusc.2022.156311 ↗
34. XPS surface analysis of ceria-based materials: experimental methods and considerations10.1016/j.apsadv.2023.100469 ↗
35. Unravelling adsorbate–metal–oxide interactions: water vapor chemistry on the growth and sintering of ni over reducible CeO2(111) thin films10.1021/acs.jpcc.5c01974 ↗
36. Ru-CeO2 and Ni-CeO2 coated on open-cell metallic foams by electrodeposition for the CO2 methanation10.1021/acs.iecr.0c06024 ↗
37. Monitoring by in situ NAP-XPS of active sites for CO2 methanation on a Ni/CeO2 catalyst10.1016/j.jcou.2022.101980 ↗
38. Speciation of magnesium surfaces by X‐ray photoelectron spectroscopy (XPS)10.1002/sia.70003 ↗
39. On the wrong assignment of the XPS O1s signal at 531–532 eV attributed to oxygen vacancies in photo- and electro-catalysts for water splitting and other materials applications10.1016/j.susc.2021.121894 ↗
40. Structural design and particle size examination on NiO-CeO2 catalysts supported on 3D-printed carbon monoliths for CO2 methanation10.1016/j.jcou.2024.102733 ↗
41. Cyclic operation of CO2 capture and conversion into methane on Ni-hydrotalcite based dual function materials (DFMs)10.1016/j.jcou.2023.102476 ↗
42. Catalysts and adsorbents for CO2 capture and conversion with dual function materials: limitations of Ni-containing DFMs for flue gas applications10.1016/j.jcou.2019.03.009 ↗
43. Structurally improved MgO adsorbents derived from magnesium oxalate precursor for enhanced CO2 capture10.1016/j.fuel.2020.118379 ↗
44. Facile synthesis of hierarchically porous MgO sorbent doped with CaCO3 for fast CO2 capture in rapid intermediate temperature swing sorption10.1016/j.cej.2017.11.095 ↗
45. Synergistic activation of CO2 and H2 by Ru-oxygen vacancy pairs over porous CeO2 for efficient formic acid synthesis10.1016/j.fuel.2026.139058 ↗
46. Effect of micro-structure and oxygen vacancy on the stability of (Zr-Ce)-additive CaO-based sorbent in CO2 adsorption10.1016/j.jcou.2017.03.015 ↗
47. Integrated CO2 capture and methanation on Ru/CeO2-MgO combined materials: morphology effect from CeO2 support10.1016/j.fuel.2022.123420 ↗
48. Experiments and mechanism of kinetics/stability of CO2 capture by Ce/Zr carrier-loaded MgO-based adsorbents
49. Diving into the COx methanation mechanism of CO and CO2 mixtures catalyzed by the nanostructured NiO-CeO2 catalyst10.1021/acscatal.5c02682 ↗
50. Interfacial Ni active sites strike solid solutional counterpart in CO2 hydrogenation10.1016/j.eti.2022.102747 ↗