Self-passivation behavior and mechanisms of 00Cr27Ni35Mo7CuN austenitic alloy induced by ruthenium in a simulated waste sulfuric acid recovery environment
Source abstract
Abstract
To address the severe challenge of acid depassivation encountered by equipment fabricated from traditional alloys within the chemical industry, a ruthenium-micro-alloyed 00Cr27Ni35Mo7CuN austenitic alloy was developed. For the first time, spontaneous passivation was successfully achieved for this alloy in a simulated waste sulfuric acid recovery environment, effectively hindering further corrosion. It was demonstrated that when the Ru content reached 0.5 wt.%, a stable passive film was spontaneously formed, accompanied by a considerable acceleration of the cathodic process. The passive film established at 0.2 VMSE was found to be primarily composed of Cr2O3 and Cr(OH)3. Notably, the content of Cr2O3 was increased by approximately 50%, whereas that of Cr(OH)3 was decreased by about 40%. The mechanism of self-passivation can be attributed to the pronounced catalytic effect of Ru on the cathodic reaction and its regulatory influence on the composition of the passive film. These findings contribute to a deeper understanding of the role of Ru in modifying passive films in aggressive environments and provide a feasible pathway along with a novel material candidate for mitigating the problem of acid depassivation in chemical industrial applications.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · Corrosion Behavior and Inhibition · Intermetallics and Advanced Alloy Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (73)
Show source-provided references
1. Titanium white sulfuric acid concentration by direct contact membrane distillation10.1016/j.cej.2015.09.064 ↗
2. Carbon peak and carbon neutrality in China: goals, implementation path, and prospects
3. Recent progress and emerging strategies for carbon peak and carbon neutrality in China10.1002/ghg.2235 ↗
4. Performance analysis of treating sulfuric acid solution by the combined system of vacuum membrane distillation and mechanical vapor recompression10.1016/j.cep.2020.107890 ↗
5. Corrosion of iron and nickel based alloys in sulphuric acid: challenges and prevention strategies10.1016/j.jmrt.2023.08.198 ↗
6. Materials for extreme environments10.1038/s41578-022-00496-z ↗
7. Investigating the corrosion behaviour of Alloy 34 in a simulated waste sulfuric acid recovery environment10.1016/j.conbuildmat.2025.140813 ↗
8. The history of the point defect model for the passive state: a brief review of film growth aspects10.1016/j.electacta.2010.11.005 ↗
9. Mechanism of depassivation10.1149/05031.0469ecst ↗
10. Electrochemical analysis on the potential decay behavior of Fe-20Cr stainless steels in sulfuric acid solution10.1016/j.electacta.2018.01.168 ↗
11. Cao · 2008
12. Recent advances and perspectives in Ru hybrid electrocatalysts for the hydrogen evolution reaction10.1021/acs.energyfuels.3c00749 ↗
13. Ruthenium‐based electrocatalysts for hydrogen evolution reaction: from nanoparticles to single atoms
14. Recent advances in engineered Ru‐based electrocatalysts for the hydrogen/oxygen conversion reactions10.1002/aenm.202202119 ↗
15. Cathodic modification of stainless steels with ruthenium: a review of recent advances in making the cheaper option cheaper10.1515/corrrev-2018-0023 ↗
16. Cathodic modification as a means of improving the corrosion resistance of alloys10.1007/BF01094295 ↗
17. J.H. Potgieter, Corrosion of Passive Alloys: The Effect of Noble Metal Additions, in: Shreirs Corros., 1st ed., Elsevier B.V., Amsterdam, Netherlands, 2010: pp. 2224–2249. doi: 10.1016/B978-044452787-5.00188-8.10.1016/B978-044452787-5.00188-8 ↗
18. Enhanced adhesion of anticorrosion ruthenium films deposited by RF sputtering on 304L stainless steel10.1016/j.surfcoat.2022.128381 ↗
19. Corrosion properties of Fe–24Cr stainless alloy modified by plasma immersion ion implantation in 0.5 M sulfuric acid solution10.1016/j.surfcoat.2006.09.049 ↗
20. Laser surface alloying of ferritic Fe-40Cr alloy with ruthenium10.1016/S0257-8972(96)03135-0 ↗
21. Fe–Cr–Ni–Mo–Ru alloys produced by laser surface alloying10.1179/sur.1996.12.3.246 ↗
22. Effects of vapour deposited and bulk alloyed ruthenium on corrosion resistance of a duplex stainless steel in sulphuric acid10.1179/sur.1992.8.4.289 ↗
23. The effect of varying ruthenium content on the corrosion behaviour of two cathodically modified superferritic stainless steels10.1179/cmq.1995.34.2.143 ↗
24. Corrosion behaviour of superferritic stainless steels cathodically modified with minor additions of ruthenium in sulphuric and hydrochloric acids10.1016/j.matdes.2008.08.019 ↗
25. Corrosion behaviour of duplex stainless steels containing minor ruthenium additions in reducing acid media10.1007/BF00243734 ↗
26. Corrosion behavior of duplex stainless steel alloy cathodically modified with minor ruthenium additions in concentrated sulfuric acid solutions10.1016/S1452-3981(23)18184-3 ↗
27. The effect of ruthenium on the corrosion behaviour of a 22 mass% chromium ferritic stainless steel in 1 m sulphuric acid10.1007/BF00275290 ↗
28. Corrosion behavior of a high-chromium duplex stainless steel with minor additions of ruthenium in sulfuric acid10.5006/1.3293596 ↗
29. Comparative study of surface properties of austenitic stainless steels in sulfuric and hydrochloric acid solutions10.1016/0013-4686(96)00163-6 ↗
30. Effect of additions of ru and pd on the electrochemical behaviour of austenitic stainless steel in organic acids10.1016/S1452-3981(23)10901-1 ↗
31. Alloys cathodically modified with noble metals10.1007/BF01018598 ↗
32. Mo content-depended competition between Cr2O3 enrichment and selective dissolution of CoCrFeNiMox high entropy alloys10.1038/s41529-022-00313-6 ↗
33. Thermal mechanisms of grain refinement in steels: a review10.1007/s12540-020-00700-1 ↗
34. Effect of grain size on corrosion: a review10.5006/1.3462912 ↗
35. A more general method for ranking the enrichment of alloying elements in passivation films10.1002/sia.1676 ↗
36. The application of ICP‐MS and XPS to studies of ion selectivity during passivation of stainless steels10.1149/1.2086860 ↗
37. Atomic emission spectroelectrochemistry applied to dealloying phenomena II. Selective dissolution of iron and chromium during active–passive cycles of an austenitic stainless steel10.1016/j.electacta.2009.08.028 ↗
38. The dissolution behaviour of iron, chromium, molybdenum and copper from pure metals and from ferritic stainless steels10.1016/0010-938X(87)90060-6 ↗
39. Influence of temperature on the electrochemical and passivation behavior of 2507 super duplex stainless steel in simulated desulfurized flue gas condensates10.1016/j.corsci.2017.01.016 ↗
40. Effect of temperature on passive film formation of UNS N08031 Cr–Ni alloy in phosphoric acid contaminated with different aggressive anions10.1016/j.electacta.2013.08.040 ↗
41. Passivation behaviour of stainless steel (UNS N-08028) in industrial or simplified phosphoric acid solutions at different temperatures10.1016/j.corsci.2015.07.025 ↗
42. Electrochemical studies and molecular simulations on the use of molybdic acid for stabilization of AISI 304 stainless steel passive film in sulfuric acid medium10.1016/j.molliq.2021.117733 ↗
43. Passivation behaviour of Alloy 31 (UNS N08031) in polluted phosphoric acid at different temperatures10.1016/j.corsci.2011.11.014 ↗
44. Nucleation and growth of anodic oxide films10.1016/0013-4686(83)85175-5 ↗
45. The remarkable passivity of austenitic stainless steel in sulphuric acid solution and the effect of repetitive temperature cycling10.1016/j.corsci.2009.07.010 ↗
46. Effect of time on the characteristics of passive film formed on stainless steel10.1016/j.apsusc.2017.03.155 ↗
47. Electrochemical behaviour of high nitrogen stainless steel in acidic solutions10.1016/j.corsci.2009.02.026 ↗
48. Effects of alloying elements, Cr, Mo and N on repassivation characteristics of stainless steels using the abrading electrode technique10.1016/j.matchemphys.2005.10.016 ↗
49. The corrosion behavior and passive film properties of the cast and annealed AlCoCrFeNi2.1 eutectic high-entropy alloy in sulfuric acid solution10.1016/j.corsci.2024.112456 ↗
50. Erosion–corrosion resistance of electroplated Co-Pd film on 316L stainless steel in a hot sulfuric acid slurry environment10.1016/j.apsusc.2015.01.087 ↗
51. The impedance properties of the oxide film on the Ni–Cr–Mo Alloy-22 in neutral concentrated sodium chloride solution10.1016/j.electacta.2010.07.064 ↗
52. Effect of potential formation on the electrochemical behaviour of a highly alloyed austenitic stainless steel in contaminated phosphoric acid at different temperatures10.1016/j.electacta.2012.07.012 ↗
53. Application of impedance spectroscopy and surface analysis to obtain oxide film thickness10.1149/2.1061709jes ↗
54. Dielectric properties of materials showing constant-phase-element (CPE) impedance response10.1149/2.033306jes ↗
55. EIS and XPS study of surface modification of 316LVM stainless steel after passivation10.1016/S0010-938X(98)00122-X ↗
56. Passivity of Sanicro28 (UNS N-08028) stainless steel in polluted phosphoric acid at different temperatures studied by electrochemical impedance spectroscopy and Mott–Schottky analysis10.1016/j.corsci.2014.04.056 ↗
57. Microstructure and corrosion behavior of FeCrNiCoMnx (x = 1.0, 0.6, 0.3, 0) high entropy alloys in 0.5 M H2SO410.1016/j.corsci.2021.109694 ↗
58. XPS analysis of oleylamine/oleic acid capped Fe3O4 nanoparticles as a function of temperature10.1016/j.apsusc.2014.02.006 ↗
59. Passive behaviour of non-equiatomic NiCoCrTa multi-principal element alloys in dilute sulfuric acid10.1016/j.jmrt.2023.11.092 ↗
60. Corrosion behavior of an equiatomic CoCrFeMnNi high-entropy alloy compared with 304 stainless steel in sulfuric acid solution10.1016/j.corsci.2018.02.031 ↗
61. Surface composition of Ru containing duplex stainless steel after passivation in non-oxidizing media10.1016/S0169-4332(98)00326-2 ↗
62. On the corrosion resistance of the CoCrFeMnNi high entropy alloys in chloride-containing sulfuric acid solutions
63. Characterization of various oxygen species on an oxide surface: RuO2 (110)10.1021/jp003213j ↗
64. Effects of hydrogen on passivation and semiconductive properties of passive film on Fe-based amorphous coatings10.1016/j.apsusc.2023.157754 ↗
65. Ru@RuO2 core‐shell nanorods: a highly active and stable bifunctional catalyst for oxygen evolution and hydrogen evolution reactions10.1002/eem2.12031 ↗
66. Enhanced hydrogen evolution in neutral media via proximity effect of Ru/RuO2-TiO2 nanocatalysts10.1016/j.jmst.2024.06.013 ↗
67. Influence of Ru additions on the corrosion behaviour of WC–Co cemented carbide alloys in sulphuric acid10.1016/j.ijrmhm.2011.02.007 ↗
68. Influence of Ru-Ni-Nb combined cathode modification on corrosion behavior and passive film characteristics of Ti-6Al-4V Alloy used for oil country tubular goods
69. Pourbaix machine learning framework identifies acidic water oxidation catalysts exhibiting suppressed ruthenium dissolution10.1021/jacs.4c01353 ↗
70. Cr dopant mediates hydroxyl spillover on RuO2 for high-efficiency proton exchange membrane electrolysis10.1038/s41467-024-51871-z ↗
71. Oxygen spillover from RuO2 to MoO3 enhances the activity and durability of RuO2 for acidic oxygen evolution10.1039/D4EE02549K ↗
72. Laser-induced high-entropy alloys as long-duration bifunctional electrocatalysts for seawater splitting10.1039/D4EE01093K ↗
73. Integrated computational materials engineering of corrosion resistant alloys10.1038/s41529-018-0027-4 ↗