journal article·2026-12Open access

A computational approach to investigate adsorption on polar metal oxide surfaces: A DFT study of H2O2 dissociation and interaction with ALD-fabricated ZnO(002)

Mario Mäkinen, Kari Laasonen

Abstract

The explicit structure of both polar and stable ZnO(002) surface has been under investigation for decades. The answer to this question is even harder to obtain in normal conditions, where the surface is in contact with molecules of ambient air. As modelling of surface reactions generally require an explicit description of the surface, this has made zinc oxide, a material abundant in applications, painstakingly difficult to model. Here, we present a density functional theory-based approach to investigate surface reactions on polar zinc oxide surface in ambient conditions. Hydrogen peroxide was used as an adsorbate, and the utilized surface structure replicates atomic layer deposition. We discovered that the dissociation of hydrogen peroxide on ZnO(002) is a mildly endothermic (0.14 eV) reaction with an activation energy of 0.53 eV, and follows an Eley-Rideal mechanism. It is followed by an exothermic (-0.43 eV and -0.46 eV) dissociation. In addition, properties of ZnO(002) surface as a hydrogen peroxide sensor and as a catalyst for hydrogen peroxide production were investigated. As a sensor material, ZnO(002) should greatly benefit from the promotion of molecular adsorption instead of dissociative one. This is because its adsorption energy is identical to the effect of entropy (both 0.70 eV), and the lack of changes in surface structure makes it ideal for rapid and consecutive reactions. According to our calculations, the formation of hydrogen peroxide on ZnO(002) surface is significantly endothermic (1.8 eV) reaction. In this article, we discuss methods to increase the catalytic activity of ZnO(002).
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Catalytic Processes in Materials Science · ZnO doping and properties · Gas Sensing Nanomaterials and Sensors

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (49)

Show source-provided references
1. Mäkinen · 2026
2. Why are polar surfaces of ZnO stable?10.1021/acs.chemmater.7b01487 ↗
3. Activity of ZnO polar surfaces: an insight from surface energies10.1039/C4CP03221G ↗
4. Stability of polar oxide surfaces10.1103/PhysRevLett.86.3811 ↗
5. Novel stabilization mechanism on polar surfaces: Zno(0001)-Zn10.1103/PhysRevLett.90.016102 ↗
6. Stabilization mechanisms of polar surfaces: ZnO surfaces10.1103/PhysRevB.78.155424 ↗
7. Stabilization mechanism for the polar ZnO(0001¯)-o surface10.1103/PhysRevB.87.085313 ↗
8. New approaches for calculating absolute surface energies of wurtzite (0001)/(0001−): A study of ZnO and GaN10.1063/1.4952395 ↗
9. Preferential growth of ZnO thin films by the atomic layer deposition technique10.1088/0957-4484/19/43/435609 ↗
10. Epitaxial growth of ZnO films at extremely low temperature by atomic layer deposition with interrupted flow10.1016/j.matchemphys.2009.12.028 ↗
11. Effect of precursor solution concentration on the structural properties of sprayed ZnO films10.1007/BF00728914 ↗
12. Effect of the variation of film thickness on the structural and optical properties of ZnO thin films deposited on sapphire substrate using PLD10.1016/S0169-4332(01)00746-2 ↗
13. Nanostructure of ZnO thin films prepared by reactive rf magnetron sputtering10.1016/S0040-6090(97)01148-6 ↗
14. Electrical and optical properties of ZnO transparent conducting films by the sol–gel method10.1016/S0022-0248(02)01907-3 ↗
15. The influence of deposition temperature on growth mode, optical and mechanical properties of ZnO films prepared by the ALD method10.1016/j.jcrysgro.2012.12.024 ↗
16. ZnO as an active and selective catalyst for electrochemical water oxidation to hydrogen peroxide10.1021/acscatal.8b04873 ↗
17. Highly reversible Zn anode design through oriented ZnO(002) facets10.1002/adma.202408908 ↗
18. Selectivity of CO and NO adsorption on ZnO (0002) surfaces: A DFT investigation10.1016/j.apsusc.2017.03.009 ↗
19. A ZnO-based catalytic system for the synthesis of hydrogen peroxide from air10.1002/anie.202424984 ↗
20. Seawater usable for production and consumption of hydrogen peroxide as a solar fuel10.1038/ncomms11470 ↗
21. An organic perspective on photocatalytic production of hydrogen peroxide10.1038/s41929-023-00980-x ↗
22. SnSe nanosheets with sn vacancies catalyse H2O2 production from water and oxygen at ambient conditions10.1038/s41929-025-01335-4 ↗
23. Photochemical synthesis of hydrogen peroxide at zinc oxide Surfaces110.1021/ja01108a017 ↗
24. Photocatalytic formation of hydrogen peroxide over highly porous illuminated ZnO and TiO2thin film10.1080/02772240009358969 ↗
25. H2o2 formation from photocatalytic processes at the ZnO/water interface10.1007/BF02987409 ↗
26. Piezoelectric ZnO nanoarrays for catalytic detection of H2O2 with ultra sensitivity10.1063/5.0146730 ↗
27. A highly sensitive H2O2 sensor based on zinc oxide nanorod arrays film sensing interface10.1039/c0an00041h ↗
28. Flexible sensors for hydrogen peroxide detection: A critical review10.1021/acsami.1c24727 ↗
29. The influence of atomic layer deposition process temperature on ZnO thin film structure10.1016/j.apsusc.2018.03.169 ↗
30. Surface chemistry of atomic layer deposition: A case study for the trimethylaluminum/water process10.1063/1.1940727 ↗
31. Preparation and characterization of ALD deposited ZnO thin films studied for gas sensors10.1016/j.apsusc.2016.06.007 ↗
32. Thermochemistry and micro-kinetic analysis of methanol synthesis on ZnO (0001)10.1016/j.jcat.2013.10.015 ↗
33. Efficient H2O2 dissociation and formation on zinc chalcogenides: A density functional theory study10.1016/j.apsusc.2023.156495 ↗
34. Reactivity of metal oxide clusters with hydrogen peroxide and water – a DFT study evaluating the performance of different exchange–correlation functionals10.1039/c3cp44559c ↗
35. Electronic structure calculations with GPAW: a real-space implementation of the projector augmented-wave method
36. The atomic simulation environment–a python library for working with atoms
37. Generalized gradient approximation made simple10.1103/PhysRevLett.77.3865 ↗
38. Accurate molecular van der waals interactions from ground-state electron density and free-atom reference data10.1103/PhysRevLett.102.073005 ↗
39. A climbing image nudged elastic band method for finding saddle points and minimum energy paths10.1063/1.1329672 ↗
40. Structural relaxation made simple10.1103/PhysRevLett.97.170201 ↗
41. Insights into current limitations of density functional theory10.1126/science.1158722 ↗
42. VMD: Visual molecular dynamics10.1016/0263-7855(96)00018-5 ↗
43. Modelling the growth reaction pathways of zincone ALD/MLD hybrid thin films: a DFT study10.1039/D4CP00249K ↗
44. Electron-energy-loss spectra and the structural stability of nickel oxide: An LSDA+U study10.1103/PhysRevB.57.1505 ↗
45. Modelling of growth reaction pathways of zincone ALD/MLD hybrid thin films: a DFT study of precursor screening and the diethyl zinc pulse10.1039/D5RA00686D ↗
46. Structure parameters and polarity of the wurtzite type compounds Sic—2H and ZnO10.1016/0038-1098(79)90754-3 ↗
47. Improving the property of ZnO nanorods using hydrogen peroxide solution10.1016/j.jcrysgro.2008.01.040 ↗
48. Well-controlled wet etching of ZnO films using hydrogen peroxide solution10.1016/j.apsusc.2013.11.053 ↗
49. Photoredox catalysis over semiconductors for light-driven hydrogen peroxide production10.1039/D0GC04236F ↗