Preparation of SiO2/TiO2 mixed abrasives and their synergistic effect with complexing agent D-gal on sapphire substrate chemical mechanical polishing behavior
Source abstract
Abstract
To enhance the chemical mechanical polishing (CMP) efficiency of sapphire crystals, a mechanical-chemical synergistic approach was employed in this study, specifically the SiO2/TiO2 mixed abrasive synergistic complexing agent (D-gal) method. The CMP results showed that the material removal rate (MRR) of C-, A-, and M-plane sapphire increased by 59.86%, 103.40%, and 57.49%, and by 15.76%, 50.00%, and 13.86%, relative to single and mixed abrasive systems, respectively, while the surface roughness (Sq) decreased to 0.233 nm, 0.247 nm, and 0.234 nm, respectively. SEM, UV-Vis, and zeta potential analyses confirm that the mixed abrasives, after magnetic stirring and ultrasonication, remain stably dispersed for at least 5 hours. Tribological analysis combined with XPS reveals that the performance enhancement is mainly attributed to the synergistic interaction between intensified mechanical contact and chemical reactions, generating a softened surface layer of Al2Si2O7•2H2O, Al2TiO5 and complex Al(III)/D-gal. Theoretical calculations indicate that the -OH and C=O functional groups in D-gal enhance molecular reactivity, providing abundant active sites that promote interfacial reactions. This approach of chemical-mechanical synergistic enhancement provides theoretical guidance and an effective approach for developing high-efficiency CMP processes for sapphire and other hard and brittle materials.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Surface Polishing Techniques · Minerals Flotation and Separation Techniques · Adsorption, diffusion, and thermodynamic properties of materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (60)
Show source-provided references
1. Investigation on the basic characteristics of semi-fixed abrasive grains polishing technique for polishing sapphire (α-Al2O3)10.3390/ma15113995 ↗
2. Metallization on sapphire and low-temperature joining with metal substrates10.3390/ma15051783 ↗
3. Adhesive-free bonding of monolithic sapphire for pressure sensing in extreme environments10.3390/s18082712 ↗
4. Polishing performance and removal mechanism of core-shell structured diamond/SiO2 abrasives on sapphire wafer10.3390/mi13122160 ↗
5. Structural and optical properties of AlN sputtering deposited on sapphire substrates with various orientations10.1088/1674-4926/43/2/022801 ↗
6. Multi-photon absorption enhancement by dual-wavelength double-pulse laser irradiation for efficient dicing of sapphire wafers10.1038/s41598-017-05548-x ↗
7. Nanophotonic crystals on unpolished sapphire substrates for deep-UV light-emitting diodes10.1038/s41598-021-84426-z ↗
8. Crystalline orientation effects on material removal of sapphire by femtosecond laser irradiation10.1016/j.ceramint.2019.08.056 ↗
9. Grinding forces in micro slot-grinding (MSG) of single crystal sapphire10.1016/j.ijmachtools.2016.10.004 ↗
10. GaN thin films growth and their application in photocatalytic removal of sulforhodamine B from aqueous solution under UV pulsed laser irradiation10.1080/02773813.2010.542399 ↗
11. Focused ion beam milling of single-crystal sapphire with A-, C-, and M-orientations10.3390/ma13122871 ↗
12. Femtosecond laser processing technology for anti-reflection surfaces of hard materials10.3390/mi13071084 ↗
13. The determining factor of a preferred orientation of GaN domains grown on m-plane sapphire substrates10.1038/srep16236 ↗
14. Recent advances in CeO2 based abrasives for chemical mechanical polishing10.1039/D5CP00778J ↗
15. Controlled synthesis of triangular submicron-sized CeO2 and its polishing performance10.3390/ma17092001 ↗
16. Chemical mechanical polishing as an alternative surface treatment technique for corrosion prevention of carbon steel in an acidic medium10.1038/s41598-025-98210-w ↗
17. The effects of friction and temperature in the chemical–mechanical planarization process10.3390/ma16072550 ↗
18. Review on modeling and application of chemical mechanical polishing10.1515/ntrev-2020-0016 ↗
19. Experimental strategies for studying tribo-electrochemical aspects of chemical-mechanical planarization10.3390/lubricants12020063 ↗
20. Study on planarization machining of sapphire wafer with soft-hard mixed abrasive through mechanical chemical polishing10.1016/j.apsusc.2016.07.155 ↗
21. Chemical mechanical polishing of sapphire elucidated by densely discrete phase model and verified using atomic force microscopy10.1016/j.triboint.2024.109834 ↗
22. Investigation on the material removal mechanism of sapphire wafer by novel green slurry in semi-fixed abrasive polishing
23. Preparation of MgO doped colloidal SiO2 abrasive and their chemical mechanical polishing performance on C-, R- and A-plane sapphire substrate10.1016/j.ceramint.2018.05.087 ↗
24. Influence of SiO2-ZnO mixed soft abrasive on tribological behavior and polishing performance of sapphire wafer10.1016/j.mssp.2024.108318 ↗
25. Green chemical mechanical polishing of sapphire wafers using a novel slurry10.1039/D0NR04705H ↗
26. Effect of hydroxy carboxylates as complexing agent on improving chemical mechanical polishing performance of M-plane sapphire and action mechanism analysis10.1016/j.ceramint.2022.11.132 ↗
27. Exploring the effectiveness of polyhydroxy complexing agents in sapphire chemical mechanical polishing: combining experiments and theoretical calculation10.1016/j.triboint.2024.110042 ↗
28. Effects of mixed ultrafine colloidal silica particles on chemical mechanical polishing of sapphire10.7567/JJAP.57.07MD03 ↗
29. Chemical mechanical polishing for sapphire wafers using a developed slurry10.1016/j.jmapro.2021.01.004 ↗
30. The role of ammonium citrate and dodecyl pyridinium chloride on chemical mechanical polishing relevant to SiO2 dielectric layer10.1016/j.jmapro.2023.10.054 ↗
31. Enhancing slurry stability and surface flatness of silicon wafers through organic amine-catalyzed synthesis silica sol10.3390/nano14161371 ↗
32. Investigation of nanoparticle dispersibility and stability based on TiO2 analysis by SMLS, DLS, and SEM10.1007/s11051-024-05959-8 ↗
33. Comprehensive evaluation of TiO2 nanofluid stability: Insights from pH, EC measurements, and UV-Vis spectroscopy10.1016/j.nanoso.2024.101387 ↗
34. Effect of chitosan oligosaccharide as a complexing agent on chemical mechanical polishing performance of C-, A- and R-plane sapphire substrate10.1149/2162-8777/ac9c2d ↗
35. Experimental investigation and modeling of friction coefficient and material removal during optical glass polishing10.1007/s13369-022-07042-7 ↗
36. Multiwfn: a multifunctional wavefunction analyzer10.1002/jcc.22885 ↗
37. Experimental and computational studies on octyl hydroxamic acid as an environmentally friendly inhibitor of cobalt chemical mechanical polishing10.1021/acsami.2c02837 ↗
38. In-depth insight into the inhibition mechanism of pyrimidine derivatives on the corrosion of carbon steel in CO2 containing environment based on experiments and theoretical calculations10.1016/j.corsci.2021.109236 ↗
39. VMD: visual molecular dynamics10.1016/0263-7855(96)00018-5 ↗
40. Synthesis and characterization of TiO2-water nanofluids with different surfactants10.1016/j.icheatmasstransfer.2016.05.011 ↗
41. Research progress on dispersion stability of SiO2 abrasive in CMP slurry
42. On the efficiency of UV-vis spectroscopy in assessing the dispersion quality in sonicated aqueous suspensions of carbon nanotubes10.1016/j.colsurfa.2016.01.053 ↗
43. Synthesis of highly concentrated suspensions of silver nanoparticles by two versions of the chemical reduction method10.3390/mps2010003 ↗
44. Unveiling the mechano-chemical synergy of AMP derivatives as multi-functional pH regulators on C-, R-, and M-plane sapphire CMP via experiments and DFT calculations
45. Chemical-mechanical synergies effects of multi-purpose pH regulators on C-, A- and R-plane sapphire polishing10.1016/j.triboint.2024.109603 ↗
46. Nano-scratching and nano-machining in different environments on Cr2N/Cu multilayer thin films10.1016/j.tsf.2011.01.067 ↗
47. Material removal mechanism of Cu-CMP studied by nano-scratching under various environmental conditions10.1016/j.wear.2012.01.003 ↗
48. Study on effect of the surface variation of colloidal silica abrasive during chemical mechanical polishing of sapphire
49. Preparation of monodisperse Ti-doped colloidal SiO2 composite abrasives and their chemical mechanical polishing performances on sapphire substrates10.1149/2.0231612jss ↗
50. XPS analysis of the interface of ceramic thin films for humidity sensors10.1016/0169-4332(93)90459-O ↗
51. ESCA, XRD and IR characterization of aluminum oxide, hydroxyfluoride and fluoride surfaces in correlation with their catalytic activity in heterogeneous halogen exchange reactions10.1006/jcat.1994.1208 ↗
52. A qualitative and quantitative study of the oxides of aluminum and silicon using AES and XPS10.1016/0368-2048(85)80038-4 ↗
53. Ion beam induced chemical vapor deposition procedure for the preparation of oxide thin films. II. Preparation and characterization of AlxTiyOz thin films10.1116/1.579096 ↗
54. Influence of the amount of titania on the texture and structure of titania supported on silica10.1006/jcat.1996.0214 ↗
55. Auger and photoelectron line energy relationships in aluminum-oxygen and silicon-oxygen compounds10.1116/1.571870 ↗
56. The prediction and theoretical study for chemical reactivity, thermophysical and biological activity of morpholinium nitrate and nitrite ionic liquid crystals: a DFT study
57. Experimental and density functional theory study of complexing agents on cobalt dissolution in alkaline solutions10.1016/j.electacta.2021.137977 ↗
58. Intermolecular interaction characteristics of the all-carboatomic ring, cyclo [18] carbon: focusing on molecular adsorption and stacking10.1016/j.carbon.2020.09.048 ↗
59. Corrosion inhibition properties of small peptides: DFT and Monte Carlo simulation studies10.1016/j.molliq.2021.115782 ↗
60. A new insight into corrosion inhibition mechanism of copper in aerated 3.5 wt% NaCl solution by eco-friendly imidazopyrimidine dye: experimental and theoretical approach10.1016/j.cej.2018.08.079 ↗