Surface-state-engineered biogenic spinel Co3O4 coatings for antibiofilm interfaces: XPS tracking of post-biofilm conditioning and hemocompatibility
Source abstract
Abstract
Engineering green-derived metal-oxide coatings often lacks clear linkage between surface chemical states and biointerface outcomes. Here, phase-pure spinel cobalt oxide nanostructures (Co₃O₄ NSs) were synthesized using Leucaena leucocephala L. leaf extract and immobilized as a surface coating. XRD confirmed single-phase cubic Co₃O₄ (JCPDS 42-1467) with average crystallite size of 23 nm, while ATR-FTIR and XPS indicated an oxide-rich surface with mixed-valence Co²⁺/Co³⁺ states. Co₃O₄ NSs inhibited Streptococcus mutans, Staphylococcus aureus, and Salmonella Typhimurium (MIC 10–20 µg mL⁻¹, strain dependent) and suppressed early biofilm development. A three-layer drop-cast Co₃O₄ NSs@glass coating generated a hydrophilic rough interface, reducing contact angle from 35 ± 5° to 15 ± 5° and increasing AFM Ra from 0.90 to 32.0 nm. Under biofilm-forming conditions (10⁶ CFU mL⁻¹ in MHB with 1% glucose, 37 °C, 24 h) without free nanoparticles, Co₃O₄ NSs@glass reduced biofilm surface coverage to 25 ± 10% compared with 80 ± 10% on bare glass. Post-exposure XPS revealed biofilm-driven interfacial conditioning, with increased hydroxylated oxygen and oxygenated carbon plus emerging N 1s signals, while the Co₃O₄ fingerprint remained detectable, indicating interface-mediated antibiofilm activity. These results present a green route to redox-active Co₃O₄ coatings and a surface-science explanation for antibiofilm performance in vitro.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Nanoparticles: synthesis and applications · Polymer Surface Interaction Studies · TiO2 Photocatalysis and Solar Cells
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (75)
Show source-provided references
1. Nano revolution: exploring the frontiers of nanomaterials in science, technology, and society10.1016/j.nanoso.2024.101299 ↗
2. Introduction to fundamentals of nanoparticle synthesis, characterization, and properties
3. Synthesis and modification of bio-derived antibacterial Ag and ZnO nanoparticles by plants, fungi, and bacteria10.1016/j.drudis.2021.03.030 ↗
4. Potential antibacterial mechanism of silver nanoparticles and the optimization of orthopedic implants by advanced modification technologies10.2147/IJN.S165125 ↗
5. Antibacterial magnetic nanoparticles for therapeutics: a review10.1049/iet-nbt.2019.0146 ↗
6. Microwave-assisted biogenic synthesis of pure copper oxide nanoparticles by Lepidium sativum L. leaves extract: characterization and evaluation of antibacterial activity10.1016/j.jbiotec.2025.07.003 ↗
7. Synthesis, characterization, and evaluation of antibacterial and antifungal activities of CuO-ZnO-Co3O4 nanocomposites10.1016/j.heliyon.2024.e37802 ↗
8. Gold-based nanostructures for antibacterial application10.3390/ijms241210006 ↗
9. Cobalt oxide nanoparticles induce bacterial cell death and excessive ROS mediated mitochondrial dysfunction and p53-independent apoptosis in melanoma cells10.1038/s41598-025-85691-y ↗
10. Surface modification of titanium implants by metal ions and nanoparticles for biomedical application10.1021/acsbiomaterials.2c00722 ↗
11. E. Berdimurodov, C.M. Hussain, B. Tüzün, (Eds.). (2024). Multifunctional Magnetic Nanoparticles in Therapy, Biology, and Pharmacy: Synthesis, Fundamentals and Applications. CRC Press.10.1201/9781032719122 ↗
12. Phytosynthesis of Co3O4 nanoparticles using marine red algae extract and their characterization and applications
13. Electrochemical synthesis of a novel hybrid nanocomposite based on Co3O4 nanoparticles embedded in PANI-camphor sulfonic acid matrix for optoelectronic applications10.1016/j.ceramint.2023.11.300 ↗
14. Eco-friendly extraction: innovations, principles, and comparison with traditional methods
15. Biologically active compounds of plants: Structure-related antioxidant, microbiological and cytotoxic activity of selected carboxylic acids10.3390/ma13194454 ↗
16. Effect of optimisation variable and the role of plant extract in the synthesis of nanoparticles using plant-mediated synthesis approaches
17. Green and sustainable synthesis of nanomaterials: recent advancements and limitations10.1016/j.envres.2023.116316 ↗
18. Biosynthesis of copper oxide nanoparticles using leaves extract of Leucaena leucocephala L. and their upshot against diverse pathogens
19. Antioxidant and antimicrobial activities of flavonoid glycosides from Leucaena leucocephala leaves
20. Synthesis of ZnO nanoparticles and study of their antibacterial and antifungal properties10.1016/j.tsf.2010.08.073 ↗
21. The antimicrobial activity of nanoparticles: present situation and prospects for the future10.2147/IJN.S121956 ↗
22. Tailoring the wettability of glass using a double-dielectric barrier discharge reactor10.1016/j.heliyon.2018.e00522 ↗
23. ZnO nanoparticle-coated surfaces inhibit bacterial biofilm formation and increase antibiotic susceptibility10.1039/c2ra00602b ↗
24. Accessing the robustness of adventitious carbon for charge referencing (correction) purposes in XPS analysis: insights from a multi-user facility data review10.1016/j.apsusc.2022.153681 ↗
25. Clinical and Laboratory Standards Institute. (2015). Methods for dilution antimicrobial susceptibility tests for bacteria that grow aerobically (10th ed.; CLSI standard M07-A10). Clinical and Laboratory Standards Institute.
26. Growth-based bacterial viability assay for interference-free and high-throughput toxicity screening of nanomaterials10.1021/acs.analchem.6b04652 ↗
27. Current in vitro methods in nanoparticle risk assessment: limitations and challenges10.1016/j.ejpb.2008.08.009 ↗
28. Microtiter dish biofilm formation assay
29. Quantification of biofilm in microtiter plates: Overview of testing conditions and practical recommendations for assessment of biofilm production by staphylococci10.1111/j.1600-0463.2007.apm_630.x ↗
30. Quantitative and qualitative assessment methods for biofilm growth: a mini-review
31. Limits for qualitative detection and quantitative determination: application to radiochemistry10.1021/ac60259a007 ↗
32. Harmonized guidelines for single-laboratory validation of methods of analysis (IUPAC technical report)10.1351/pac200274050835 ↗
33. Methods for the determination of limit of detection and limit of quantitation of the analytical methods10.4103/2229-5186.79345 ↗
34. Trends in quality in the analytical laboratory. II. Analytical method validation and quality assurance10.1016/j.trac.2004.04.001 ↗
35. The role of oral cavity biofilm on metallic biomaterial surface destruction—corrosion and friction aspects10.3390/ijms19030743 ↗
36. Microbial corrosion of metallic biomaterials in the oral environment10.1016/j.actbio.2024.06.032 ↗
37. World Medical Association Declaration of Helsinki: ethical principles for medical research involving human subjects10.1001/jama.2013.281053 ↗
38. The hemocompatibility of nanoparticles: a review of cell–nanoparticle interactions and hemostasis10.3390/cells8101209 ↗
39. Method for analysis of nanoparticle hemolytic properties in vitro
40. Rapid colorimetric assay for cell growth and survival: modifications to the tetrazolium dye procedure giving improved sensitivity and reliability10.1016/0022-1759(86)90368-6 ↗
41. Cobalt nanoparticles for biomedical applications: facile synthesis, physiochemical characterization, cytotoxicity behavior and biocompatibility10.1016/j.apsusc.2017.03.002 ↗
42. Method for analysis of nanoparticle hemolytic properties in vitro10.1021/nl0805615 ↗
43. Understanding the correlation between in vitro and in vivo immunotoxicity tests for nanomedicines10.1016/j.jconrel.2013.05.025 ↗
44. Growing and analyzing static biofilms
45. Comparison of multiple methods for quantification of microbial biofilms grown in microtiter plates10.1016/j.mimet.2007.11.010 ↗
46. Synthesis, characterization, and investigation of optical and magnetic properties of cobalt oxide (Co3O4) nanoparticles10.1186/2193-8865-3-69 ↗
47. Optical investigation of charge-transfer transitions in spinel Co3O410.1016/S0038-1098(03)00373-9 ↗
48. Thermal stability and utilization of 1D-nanostructured Co3O4 rods derived by simple solvothermal processing10.3390/catal12101162 ↗
49. Green synthesis of cobalt oxide nanoparticles using Hyphaene thebaica fruit extract and their photocatalytic application10.3390/app13169082 ↗
50. Sustainable and efficacy approach of green synthesized cobalt oxide (Co3O4) nanoparticles and evaluation of their cytotoxicity activity on cancerous cells10.3390/molecules27238163 ↗
51. Scalable one-pot bacteria-templating synthesis route toward hierarchical, porous-Co3O4 superstructures for supercapacitor electrodes10.1038/srep02325 ↗
52. Green synthesis of cobalt oxide nanoparticles for potential biological applications10.1088/2053-1591/ab70dd ↗
53. Applications of X-ray powder diffraction microstructural analysis in applied clay mineralogy10.3390/min14060584 ↗
54. Determination of nanocrystal sizes: a comparison of TEM, SAXS, and XRD studies of highly monodisperse CoPt3 particles10.1021/la0477183 ↗
55. CeO2/Co3O4 porous nanosheet prepared using rose petal as biotemplate for photo-catalytic degradation of organic contaminants10.1016/j.apsusc.2020.148677 ↗
56. Resolving surface chemical states in XPS analysis of first row transition metals, oxides and hydroxides: Cr, Mn, Fe, Co and Ni10.1016/j.apsusc.2010.10.051 ↗
57. Surface composition and structure of Co3O4(110) and the effect of impurity segregation10.1116/1.1763899 ↗
58. Albumin and fibronectin adsorption on treated titanium surfaces for osseointegration: an advanced investigation10.1016/j.apsusc.2022.154023 ↗
59. A biocompatible SiO2/ZnO coating with enhanced antibiofilm properties for dental applications10.1016/j.apsusc.2025.162590 ↗
60. Dichloro-dihydro-fluorescein diacetate (DCFH-DA) assay: a quantitative method for oxidative stress assessment of nanoparticle-treated cells10.1016/j.tiv.2013.01.016 ↗
61. Widespread nanoparticle-assay interference: implications for nanotoxicity testing10.1371/journal.pone.0090650 ↗
62. Cobalt stress in Escherichia coli: the effect on the iron–sulfur proteins10.1074/jbc.M702519200 ↗
63. Determination of the mechanism of photoinduced toxicity of selected metal oxide nanoparticles (ZnO, CuO, Co3O4 and TiO2) to E. coli bacteria10.1016/S1001-0742(12)60152-1 ↗
64. Enhanced bioactivity of ZnO nanoparticles—an antimicrobial study10.1088/1468-6996/9/3/035004 ↗
65. Efflux-mediated heavy metal resistance in prokaryotes10.1016/S0168-6445(03)00048-2 ↗
66. Metal oxide nanoparticles against bacterial biofilms: perspectives and limitations10.3390/microorganisms8101545 ↗
67. Pharmacological assessment of Co3O4, CuO, NiO and ZnO nanoparticles via antibacterial, anti-biofilm and anti-quorum sensing activities10.2166/wst.2023.150 ↗
68. Enhanced photocatalytic degradation and antimicrobial activities of biogenic Co3O4 nanoparticles mediated by fenugreek: sustainable strategies10.1039/D4MA00795F ↗
69. Synthesis, characterization and biological applications of cobalt oxide (Co3O4) nanoparticles10.1016/j.chphi.2022.100137 ↗
70. Zinc oxide nanoparticles mediate bacterial toxicity in Mueller-Hinton broth via Zn2+10.3389/fmicb.2024.1394078 ↗
71. Rapid colorimetric assay for cellular growth and survival: application to proliferation and cytotoxicity assays10.1016/0022-1759(83)90303-4 ↗
72. Toxic or not toxic? The specifications of the standard ISO 10993-5 are not explicit enough to yield comparable results in the cytotoxicity assessment of an identical medical device10.3389/fmedt.2023.1195529 ↗
73. Challenging applicability of ISO 10993-5 for calcium phosphate biomaterials evaluation: towards more accurate in vitro cytotoxicity assessment
74. ASTM International. (2017). ASTM F756-17: Standard practice for assessment of hemolytic properties of materials. ASTM International. https://doi.org/10.1520/F0756-17.10.1520/F0756-17 ↗
75. The biofilm-metal interface: a hotspot for microbiologically influenced corrosion