journal article·2026-11

Engineering TiO2-TiS2 heterostructure decorated on S, O-functionalized MXene as multifunctional interlayer for high-performance lithium-sulfur batteries

Shiwei Ge, Qian Zhao, Weijian Du, Weikun Jiang, Yu Liu

Publisher page

Abstract

The practical application of lithium-sulfur (Li-S) batteries is impeded by polysulfides shuttling and sluggish sulfur redox kinetics. Although Ti3C2Tx MXene has demonstrated great potential for polysulfides adsorption and conversion, its restacking tendency significantly diminishes its practical effectiveness. To address this critical issue, we designed and fabricated a TiO2-TiS2 heterostructure decorated on sulfur and oxygen-functionalized MXene (SM-TT) through a controlled sulfurization strategy. This well-engineered architecture not only e suppresses MXene restacking but also constructs abundant heterointerfaces that synergistically facilitate electron and Li+ transport. Moreover, the rationally designed TiO2/TiS2 ratio can well balance the adsorption-catalysis trade-off of polysulfides. Additionally, the sulfur and oxygen functional groups on MXene surface provide additional active sites for polysulfides anchoring and catalytic conversion. When employed as multifunctional interlayer in Li-S batteries, the SM-TT interlayer enables the cell to deliver a high initial capacity of 1292.8 mAh g-1 at 0.1 C, maintain 768.6 mAh g-1 after 100 cycles, and exhibit 604.7 mAh g-1 at 1 C. Even under 5 mg cm-2 high sulfur loading, the cell still retains stable capacity of 722.7 mAh g-1 after 100 cycles. This work demonstrates an effective heterointerface engineering strategy for developing high-performance Li-S batteries.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Battery Materials and Technologies · MXene and MAX Phase Materials · 2D Materials and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (51)

Show source-provided references
1. Lightweight materials for high energy density lithium-sulfur batteries10.1002/aenm.202406069 ↗
2. 2D nanochannel interlayer realizing high-performance lithium-sulfur batteries10.1002/adma.202417321 ↗
3. Status and prospects of MXene-based lithium-sulfur batteries10.1002/adfm.202100457 ↗
4. Synergistic effect of dual-functional groups in MOF-modified separators for efficient lithium-ion transport and polysulfide management of lithium-sulfur batteries10.1002/advs.202515034 ↗
5. 2D MXene nanosheets enable small-sulfur electrodes to be flexible for lithium-sulfur batteries10.1039/C8NR09653H ↗
6. Regulating sulfur redox kinetics by coupling photocatalysis for high-performance photo-assisted lithium-sulfur batteries10.1002/anie.202402624 ↗
7. Recent developments and prospects on functional graphene-based nanocomposites as potential sulfur hosts for next-generation lithium-sulfur batteries10.1002/eem2.70032 ↗
8. Evolution of lithium metal anode along cycling in working lithium-sulfur batteries
9. Revisiting the roles of carbon in the catalysis of lithium-sulfur batteries10.1002/aesr.202300148 ↗
10. Review: a critical analysis of recent advancements on carbon-based materials for lithium-sulfur batteries10.1007/s10853-025-10768-y ↗
11. A review on engineering transition metal compound catalysts to accelerate the redox kinetics of sulfur cathodes for lithium-sulfur batteries10.1007/s40820-023-01299-9 ↗
12. A review of transition metal compounds as functional separators for lithium-sulfur batteries10.1002/slct.202203352 ↗
13. Optimization of single-atom catalysts for sulfur cathode in lithium-sulfur batteries: a review10.1016/j.nanoen.2025.111330 ↗
14. Polymers in lithium-sulfur batteries
15. Fe3O4-doped mesoporous carbon cathode with a plumber's nightmare structure for high-performance Li-S batteries10.1038/s41467-024-49826-5 ↗
16. Enhancing rate performance in lithium-sulfur batteries via synergistic bidirectional catalysis and improved conductivity10.1016/j.cej.2025.160022 ↗
17. Engineering catalytic CoSe-ZnSe heterojunctions anchored on graphene aerogels for bidirectional sulfur conversion reactions10.1002/advs.202103456 ↗
18. Dual-level engineering of MOF-derived hierarchical porous carbon nanofibers with low-coordinated cobalt single-atom catalysts for high-performance lithium-sulfur batteries
19. Recent interlayer and separator design approaches for high-performance Li-S batteries10.1002/bkcs.12833 ↗
20. Development and challenges of functional electrolytes for high-performance lithium-sulfur batteries10.1002/adfm.201800919 ↗
21. Electrophilic effect of polysulfide cations induces the formation of Li+-transport-enhanced polymer electrolyte10.1021/acsapm.5c02505 ↗
22. The lithium metal anode in Li-S batteries: challenges and recent progress10.1039/D1TA01091C ↗
23. Unveiling the capacity enhancement mechanism of carbon interlayers in lithium-sulfur batteries10.1002/aenm.202404757 ↗
24. MoS2@C-modified separator as an efficient polysulfide barrier for high-performance Li-S batteries10.1021/acsami.5c00563 ↗
25. A flexible VN-induced porous carbon nanofibers membrane as multi-functional interlayer for Li-S batteries
26. Progresses and perspectives of carbon-free metal compounds-modified separators for high-performance lithium-sulfur batteries10.1002/smll.202405141 ↗
27. Ultrathin 2D-2D MXene-LDH interlayer with high polysulfide adsorption ability for advanced Li-S batteries10.1021/acsami.4c08834 ↗
28. Co4N nanoparticles embedded in N-doped carbon pores: advanced interlayer material for lithium-sulfur batteries10.1016/j.nanoen.2025.111140 ↗
29. α-MnO2/RuO2 heterostructure-modified polypropylene separator for high-performance lithium-sulfur battery10.1002/adfm.202403101 ↗
30. Polysulfide rejection strategy in lithium-sulfur batteries using an ion-conducting gel-polymer interlayer membrane10.1021/acsami.3c02800 ↗
31. An interpenetrated protein-polar polymer interlayer for suppressing shuttle effect in Li-S batteries10.1016/j.jpowsour.2024.236145 ↗
32. Heterostructure: application of absorption-catalytic center in lithium-sulfur batteries10.1007/s12598-023-02486-8 ↗
33. Enhancing catalytic conversion of polysulfides by hollow bimetallic oxide-based heterostructure nanocages for lithium-sulfur batteries10.1021/acssuschemeng.1c04036 ↗
34. In-situ grown Ti3C2Tx@CoSe2 heterostructure as trapping-electrocatalyst for accelerating polysulfides conversion in lithium-sulfur battery10.1016/j.cej.2023.145862 ↗
35. Tuning the D-Band center of Bi2S3-MoS2 heterostructure towards superior lithium-sulfur batteries10.1002/smll.202401921 ↗
36. Heterostructures regulating lithium polysulfides for advanced lithium-sulfur batteries10.1002/adma.202303520 ↗
37. VSe2/V2C2/V2C heterocatalyst with built-in electric field for efficient lithium-sulfur batteries: remedies polysulfide shuttle and conversion kinetics10.1016/j.jechem.2023.10.003 ↗
38. Optimally arranged TiO2@MoS2 heterostructures with effectively induced built-in electric field for high-performance lithium-sulfur batteries10.1016/j.jechem.2023.04.016 ↗
39. Advances in the synthesis of 2D MXenes10.1002/adma.202103148 ↗
40. Atom-dominated relay catalysis of high-entropy MXene promotes cascade polysulfide conversion for lithium-sulfur batteries10.1039/D4EE03402C ↗
41. Burgeoning silicon/MXene nanocomposites for lithium ion batteries: a Review10.1002/adfm.202402307 ↗
42. Accelerated sulfur evolution reactions by TiS2/TiO2@MXene host for high-volumetric-energy-density lithium-sulfur batteries
43. Interfacial engineering and coupling of MXene/reduced graphene oxide/C3N4 Aerogel with optimized d-band center as a free-standing sulfur carrier for high-performance Li-S batteries10.1002/smtd.202301102 ↗
44. Entropy-driven highly chaotic MXene-based heterostructures as an efficient sulfur redox electrocatalysts for Li-S battery10.1002/adfm.202404976 ↗
45. Insight into accelerating polysulfides redox kinetics by BN@MXene heterostructure for Li-S batteries10.1002/smll.202302386 ↗
46. A general atomic surface modification strategy for improving anchoring and electrocatalysis behavior of Ti3C2T2 MXene in lithium-sulfur batteries10.1021/acsnano.9b03412 ↗
47. Dry synthesis of sulfur-terminated mxene as multifunctional catalyst for stable lithium–sulfur batteries10.1002/smll.202411668 ↗
48. 3D hierarchical Ti3C2/TiO2 composite via in situ oxidation for improved lithium-ion storage10.1039/D4CC02417F ↗
49. A robust oxygen-terminated MXene interlayer with synergistic adsorption-catalysis effect to polysulfides for efficient Li-S batteries
50. High-entropy catalysis accelerating stepwise sulfur redox reactions for lithium–sulfur batteries
51. Practice of electrochemical testing in lithium-sulfur batteries10.1557/s43581-025-00133-6 ↗