Development of a machine-learning interatomic potential for molecular dynamics simulations of titanium-based MXenes under aqueous lubrication
Source abstract
Abstract
Lubricants form protective films that separate sliding surfaces, but under boundary lubrication conditions these films can be displaced, making surface-active additives critical to prevent direct solid–solid contact. Two-dimensional materials such as MXenes have emerged as promising additives due to their ultrathin and lubricious structures. In this work, a machine-learning interatomic potential (MLIP) was developed using an active-learning framework to model Ti2CO2 and Ti2C(OH)2 MXenes confined between Fe2O3 surfaces in the presence of water. The potential was trained on density functional theory (DFT) data covering interfacial shear, edge-contact, hydrated, and surface configurations. Large-scale molecular dynamics (MD) simulations were performed to examine the effects of MXene layer number, surface termination, and asperity contact on nanoscale friction. Flat-surface simulations, supported by experimental and computational comparisons, show that friction is governed by a balance between interfacial adhesion and distributed shear, leading to a non-monotonic dependence on hydroxyl coverage. Single-asperity simulations, validated by experiment, further reveal that reduced interfacial water and increased adhesion in fully hydroxylated MXenes promote localized solid–solid contact and adhesive sliding, whereas moderately hydroxylated systems maintain low friction and structural stability. These results highlight the critical role of surface chemistry and dynamic interfacial interactions in MXene boundary lubrication.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: MXene and MAX Phase Materials · Advanced Sensor and Energy Harvesting Materials · Force Microscopy Techniques and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (44)
Show source-provided references
1. Influence of tribology on global energy consumption, costs and emissions10.1007/s40544-017-0183-5 ↗
2. Water-based lubricants: development, properties, and performances10.3390/lubricants9080073 ↗
3. Tribological properties of additives for water-based lubricants10.1016/j.wear.2010.08.008 ↗
4. Perspectives of 2D MXene tribology10.1002/adma.202207757 ↗
5. Assessment of tribological properties of Ti3C2 as a water-based lubricant additive10.3390/ma13235545 ↗
6. Simple method for preparing nanometer-thick Ti3C2Tx sheets towards highly efficient lubrication and wear resistance10.1016/j.triboint.2020.106598 ↗
7. Comparative study on boundary lubrication of Ti3C2Tx MXene and graphene oxide in water10.1007/s40544-022-0672-z ↗
8. Regulating the Nb2C nanosheets with different degrees of oxidation in water-lubricated sliding toward an excellent tribological performance10.1007/s40544-020-0469-x ↗
9. Nanoscale MXene interlayer and substrate adhesion for lubrication: a density functional theory study10.1021/acsanm.2c01847 ↗
10. How water attacks MXene10.1021/acs.chemmater.2c00224 ↗
11. The effects of temperature and termination (-O) on the friction and adhesion properties of MXenes using molecular dynamics simulation10.3390/nano12050798 ↗
12. Effect of surface termination on the balance between friction and failure of Ti3C2Tx MXenes, npj Mater
13. Advancing tribological simulations of carbon-based lubricants with active learning and machine learning molecular dynamics10.1140/epjp/s13360-024-05348-z ↗
14. Ab initio informed machine learning potential for tribochemistry and mechanochemistry: Application for eco-friendly gallate lubricant additive
15. Probing additives for green lubricants with the aid of machine learning molecular dynamics: the case of gallate molecules for aqueous solutions10.1016/j.apsusc.2025.162836 ↗
16. Effect of interlayer bonding on superlubric sliding of graphene contacts: a machine learning potential study10.1021/acsnano.3c13099 ↗
17. Machine learning interatomic potential for friction study in silicon and molybdenum disulfide10.1016/j.commatsci.2024.113608 ↗
18. Efficient iterative schemes for ab initio total-energy calculations using a plane-wave basis set10.1103/PhysRevB.54.11169 ↗
19. Generalized gradient approximation made simple10.1103/PhysRevLett.77.3865 ↗
20. Projector augmented-wave method10.1103/PhysRevB.50.17953 ↗
21. A consistent and accurate ab initio parametrization of density functional dispersion correction (DFT-D) for the 94 elements H–Pu10.1063/1.3382344 ↗
22. Effect of the damping function in dispersion corrected density functional theory10.1002/jcc.21759 ↗
23. Electron-energy-loss spectra and the structural stability of nickel oxide: an LSDA+U study10.1103/PhysRevB.57.1505 ↗
24. The hematite (α-Fe2O3) (0001) surface: evidence for domains of distinct chemistry10.1103/PhysRevLett.81.1038 ↗
25. First-principles study of size- and edge-dependent properties of MXene nanoribbons10.1103/PhysRevB.93.115412 ↗
26. H. Wang, L. Zhang, J. Han, W. E, DeePMD-kit: A deep learning package for many-body potential energy representation and molecular dynamics, Comput. Phys. Commun. 228 (2018) 178–184, Doi: 10.1016/j.cpc.2018.03.016.10.1016/j.cpc.2018.03.016 ↗
27. End-to-end symmetry preserving inter-atomic potential energy model for finite and extended systems
28. M. Abadi, P. Barham, J. Chen, Z. Chen, A. Davis, J. Dean, et al., TensorFlow: A system for large-scale machine learning, in: Proc. 12th USENIX Symp. Oper. Syst. Des. Implement. (OSDI ’16), 2016, pp. 265–283.
29. Y. Zhang, H. Wang, W. Chen, J. Zeng, L. Zhang, H. Wang, W. E, DP-GEN: A concurrent learning platform for the generation of reliable deep learning based potential energy models, Comput. Phys. Commun. 253 (2020) 107206, Doi: 10.1016/j.cpc.2020.107206.10.1016/j.cpc.2020.107206 ↗
30. LAMMPS - a flexible simulation tool for particle-based materials modeling at the atomic, meso, and continuum scales10.1016/j.cpc.2021.108171 ↗
31. Molecular dynamics simulation and machine learning prediction of tribological properties of graphene solid-liquid two-phase lubrication system10.1016/j.triboint.2024.110347 ↗
32. Roughness and lubricant effect on 3D atomic asperity contact10.1007/s11249-013-0259-y ↗
33. A molecular dynamics simulation of 3D rough lubricated contact10.1016/j.triboint.2013.07.015 ↗
34. Plastic ploughing of a sinusoidal asperity on a rough surface10.1115/1.4030318 ↗
35. Jackson, Perfectly elastic axisymmetric sinusoidal surface asperity contact10.1115/1.4031994 ↗
36. Visualization and analysis of atomistic simulation data with OVITO–the Open Visualization Tool10.1088/0965-0393/18/1/015012 ↗
37. Operando formation of hydration layer and tribofilm of graphene oxide for achieving synergistic lubrication on electrochemical boronizing surface10.1016/j.carbon.2025.120089 ↗
38. Versatile superlubricity via boronizing on engineering alloys: Insights into in situ passivation mechanism
39. Naveas · First-Principles Calculations of Hematite (α-Fe2O3) by Self-Consistent DFT+U+V · 2023 · 106033
40. Definition of the hydrogen bond10.1351/PAC-REC-10-01-02 ↗
41. MXene terminating groups =O, –F or –OH, –F or =O, –OH, –F, or =O, –OH, –Cl?10.1016/j.jechem.2022.08.032 ↗
42. Bulk substitution of F-terminations from Ti3 C2 Tx MXene by cation pillaring and gas hydrolysation10.1016/j.flatc.2023.100470 ↗
43. P. Serles, M. Hamidinejad, P. Guerra Demingos, L. Ma, N. Barri, H. Taylor, C.V. Singh, C.B. Park, T. Filleter, Friction of Ti3C2Tx MXenes, Nano Lett. 22 (2022) 3356–3363, Doi: 10.1021/acs.nanolett.2c00614.10.1021/acs.nanolett.2c00614 ↗
44. J. Li, Y. Zhang, C. Wei, Y. Li, S. He, R. Wang, B. Wyatt, R. Namakian, B. Anasori, K. Xie, T. Filleter, A. Erdemir, W. Gao, C. Wu, Compositional complexity-induced ultralow friction in medium-entropy MXenes, arXiv (2026), 2603.25865, https://arxiv.org/pdf/2603.25865.