journal article·2026-11Open access

Acid-induced surface reconstruction of NiSeTe revealed by NAP-XPS

Ashraf Abdelrahman Assadig Elameen, Tomáš Hrbek, Yevheniia Lobko, Viacheslav Kalinovych, Angelica Chiodoni, Micaela Castellino, Peter Kúš, Rui Gusmão, Zdenek Sofer, Andrea Lamberti

Abstract

Surface activation of transition metal chalcogenides (TMC) is commonly attributed to electrochemical reduction and defect formation under applied bias. Herein, we demonstrate that for single-crystalline NiSeTe, a significant fraction of the surface transformation typically associated with electrochemical activation instead arises from purely chemical, sulfuric acid-driven (H 2 SO 4 ) reconstruction occurring prior to any applied potential. Near-ambient pressure X-ray photoelectron spectroscopy (NAP-XPS) is employed to monitor the evolution of pristine, acid-exposed, and washed surfaces. Acid treatment selectively removes native TeO x species and Ni-O(H) environments, while heterogeneous sulfate-derived species collapse into a transient S(VI)-rich adlayer. Subsequent washing eliminates weakly bound sulfates and yields a chemically simplified, oxide-free NiSeTe surface with a thin, stable sulfate termination. Notably, operando, bias-controlled NAP-XPS measurements with simultaneous chronoamperometric current monitoring reveal that cathodic polarization under HER-relevant conditions does not further reduce the acid-reconstructed surface, indicating that sulfuric acid exposure already generates an oxide-free NiSeTe termination prior to electrochemical biasing. In contrast, anodic polarization under OER-relevant conditions promotes tellurium re-oxidation. These findings establish acid-driven chemical restructuring as a dominant contributor to surface activation in NiSeTe and underscore the importance of disentangling chemical and electrochemical effects in chalcogenide electrocatalysts. .
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: 2D Materials and Applications · Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (41)

Show source-provided references
1. A mini review on transition metal chalcogenides for electrocatalytic water splitting: bridging material design and practical application10.1021/acs.energyfuels.2c03833 ↗
2. Activation of the MoSe2 basal plane and Se-edge by B doping for enhanced hydrogen evolution10.1039/C7TA09982G ↗
3. MOF‐derived hollow CoS decorated with CeOx nanoparticles for boosting oxygen evolution reaction electrocatalysis10.1002/ange.201804673 ↗
4. Graphene/MoS2/FeCoNi(OH)x and Graphene/MoS2/FeCoNiPx multilayer-stacked vertical nanosheets on carbon fibers for highly efficient overall water splitting10.1038/s41467-021-21742-y ↗
5. A nickel iron diselenide-derived efficient oxygen-evolution catalyst10.1038/ncomms12324 ↗
6. In-situ construction of lattice-matching NiP2/NiSe2 heterointerfaces with electron redistribution for boosting overall water splitting10.1016/j.apcatb.2020.119584 ↗
7. Nickel-based electrocatalysts for energy-related applications: oxygen reduction oxygen evolution, and hydrogen evolution reactions10.1021/acscatal.7b01800 ↗
8. Nickel selenide as a high-efficiency catalyst for oxygen evolution reaction10.1039/C5EE02463C ↗
9. Nickel telluride as a bifunctional electrocatalyst for efficient water splitting in alkaline medium10.1039/C8TA01760C ↗
10. Nanostructured ternary nickel‐based mixed anionic (telluro)‐selenide as a superior catalyst for oxygen evolution reaction10.1002/ente.202300177 ↗
11. Two-dimensional Janus pentagonal MSeTe (M = Ni, Pd, Pt): promising water-splitting photocatalysts and optoelectronic materials10.1039/D3CP02398B ↗
12. Influence of surface oxidation on the catalytic activity of topological quantum materials10.1039/D5CP01040C ↗
13. Oxidation kinetics of WTe2 surfaces in different environments10.1021/acsaelm.0c00380 ↗
14. Environmental instability and degradation of single‐ and few‐layer WTe2 nanosheets in ambient conditions10.1002/smll.201601207 ↗
15. Unconventionally layered CoTe2 and NiTe2 as electrocatalysts for hydrogen evolution10.1002/chem.201702753 ↗
16. Surface self-reconstruction of telluride induced by in-situ cathodic electrochemical activation for enhanced water oxidation performance10.1016/j.apcatb.2022.121355 ↗
17. The rapid electrochemical activation of MoTe2 for the hydrogen evolution reaction10.1038/s41467-019-12831-0 ↗
18. Enhancing the catalytic activity of bulk MoS2 towards hydrogen evolution reaction by the formation of MoS2-MoO3-Re2O7 heterostructure10.1016/j.jcis.2022.05.107 ↗
19. Highly active two dimensional α-MoO3−x for the electrocatalytic hydrogen evolution reaction10.1039/C7TA07705J ↗
20. Tuning of crystal phase of nickel telluride nanosheets to construct superior electrocatalyst for hydrogen evolution10.1016/j.jallcom.2021.161955 ↗
21. The preparation of single crystals of FeS2, CoS2, and NiS2 pyrites by chlorine transport10.1016/0022-0248(68)90067-5 ↗
22. Operando X-ray photoelectron spectroscopy cell for water electrolysis: a complete picture of iridium electronic structure during oxygen evolution reaction10.1016/j.ijhydene.2023.12.216 ↗
23. Kitkaite NiTeSe, an ambient‐stable layered dirac semimetal with low‐energy Type‐II fermions with application capabilities in spintronics and optoelectronics10.1002/adfm.202106101 ↗
24. Kitkaite (NiTeSe), a new mineral from Kuusamo, northeast Finland
25. Environmental changes in MoTe2 excitonic dynamics by defects-activated molecular interaction10.1021/acsnano.5b00985 ↗
26. Layered transition-metal ditellurides in electrocatalytic applications—contrasting properties10.1021/acscatal.7b02080 ↗
27. New interpretations of XPS spectra of nickel metal and oxides10.1016/j.susc.2006.01.041 ↗
28. Chemical information from XPS: theory and experiment for Ni(OH)210.1063/5.0229962 ↗
29. M.C. Biesinger, B.P. Payne, A.P. Grosvenor, L.W.M. Lau, A.R. Gerson, R.St.C. Smart, Resolving surface chemical states in XPS analysis of first row transition metals, oxides and hydroxides: Cr, Mn, Fe, Co and Ni, Appl. Surf. Sci. 257 (2011) 2717–2730. DOi: 10.1016/j.apsusc.2010.10.051.10.1016/j.apsusc.2010.10.051 ↗
30. Comparison of nanoscaled and bulk NiO structural and environmental characteristics by XRD, XAFS, and XPS10.1021/cm300739y ↗
31. ZnxNi1-xO rocksalt oxide surfaces: novel environment for Zn2+ and its effect on the NiO band structure10.1021/jp073590x ↗
32. A Study on the properties of tellurium-oxide thin films based on the variable sputtering gas ratio10.3938/jkps.66.1744 ↗
33. Surface oxidation of SnTe topological crystalline insulator10.1016/j.apsusc.2018.04.246 ↗
34. XPS spectra and electronic structure of group IA sulfates10.1016/j.elspec.2006.11.032 ↗
35. Inexpensive electrochemical synthesis of nickel iron sulphides on nickel foam: super active and ultra-durable electrocatalysts for alkaline electrolyte membrane water electrolysis10.1039/C6TA04499A ↗
36. The role of SO42− surface distribution in arsenic removal by iron oxy-hydroxides10.1016/j.jssc.2014.02.026 ↗
37. Self‐assembled gallium sulfide (GaS) heterostructures enabling efficient water splitting and selective ammonia sensing10.1002/adfm.202507388 ↗
38. Hydrothermal synthesis and electrochemical hydrogen storage performance of porous hollow NiSe nanospheres10.1016/j.ijhydene.2013.03.145 ↗
39. Operando X-ray photoelectron spectroscopic investigations of the electrochemical double layer at Ir/KOH(aq) interfaces10.1016/j.elspec.2017.03.011 ↗
40. Elucidating the hydrogen selectivity of Pt/TiO x /C as a fuel-cell catalyst by operando near-ambient-pressure XPS10.1021/acsami.5c09047 ↗
41. Non-contact electric potential measurements of electrode components in an operating polymer electrolyte fuel cell by near ambient pressure XPS10.1039/C7CP05436J ↗