journal article·2026-11Open access

Surface and bulk reduction kinetics of liquid plasma-sprayed NiO-YSZ layers

Andrii Rednyk, Michael Vorochta, Ksenia Illkova, Maryna Vorokhta, Frantisek Lukac, Radek Musalek, Tomas Tesar, Jan Medricky, Tomas Chraska

Abstract

Nickel oxide–yttria stabilized zirconia (NiO-YSZ) is the established material for Solid Oxide Fuel Cell (SOFC) and Solid Oxide electrolysis Cell (SOEC) electrodes, where NiO reduction dictates the final microstructure and subsequent properties. In this study, NiO-YSZ layers were fabricated via liquid plasma spraying using a hybrid water–argon stabilized plasma torch (WSP-H), to create porous layers without pore-forming additives. To evaluate the influence of feedstock chemistry on reduction behavior, four coatings with varying NiO:YSZ ratios were prepared from ethanol-based solution-suspensions, alongside one from water-based solution. The surface and bulk reduction kinetics were systematically characterized through a combination of near-ambient pressure X-ray photoelectron spectroscopy (NAP–XPS), thermogravimetric analysis (TGA), and X-ray diffraction (XRD). Layers derived from the ethanol-based feedstock exhibited higher porosity (up to ∼ 58%) and finer phase intermixing compared to the water-based counterpart. The reduction behavior of the NiO-YSZ layers strongly correlated with the feedstock solvent and nickel content. Surface reduction initiated above 300 °C with porous ethanol-based layers showing a 60 °C kinetic advantage. Conversely, bulk reduction was inhibited by mass-transfer limitations, requiring temperatures near 750 °C for completion. Finally, total nickel content was identified as the primary factor controlling the volumetric reduction duration, with higher NiO loading extending reduction times.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: High-Temperature Coating Behaviors · Advancements in Solid Oxide Fuel Cells · Metal and Thin Film Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (42)

Show source-provided references
1. Solid oxide fuel cell: Decade of progress, future perspectives and challenges10.1016/j.ijhydene.2021.06.020 ↗
2. Solid oxide fuel cells (SOFCs): a review of an environmentally clean and efficient source of energy10.1016/S1364-0321(02)00014-X ↗
3. Recent advances in solid oxide cell technology for electrolysis10.1126/science.aba6118 ↗
4. Solid oxide electrolysis cells – current material development and industrial application10.1039/D3TA02161K ↗
5. Properties and development of Ni/YSZ as an anode material in solid oxide fuel cell: a review10.1016/j.rser.2014.04.043 ↗
6. Accessible triple-phase boundary length: a performance metric to account for transport pathways in heterogeneous electrochemical materials10.1016/j.jpowsour.2016.06.046 ↗
7. Solid oxide fuel cells
8. Thermal plasma spraying applied on solid oxide fuel cells10.1007/s11666-013-9929-4 ↗
9. Suspension and solution plasma spraying of finely structured layers: potential application to SOFCs10.1088/0022-3727/40/8/S19 ↗
10. Understanding plasma spraying10.1088/0022-3727/37/9/R02 ↗
11. Characterization of Ni–YSZ anodes for solid oxide fuel cells fabricated by suspension plasma spraying with axial feedstock injection10.1016/j.jpowsour.2013.05.174 ↗
12. Effects of pore formers on microstructure and performance of cathode membranes for solid oxide fuel cells10.1016/j.jpowsour.2011.08.036 ↗
13. Characteristics of Ni/YSZ ceramic anode prepared using carbon microspheres as a pore former10.1016/j.ijhydene.2012.07.108 ↗
14. Generation of thermal plasmas in liquid-stabilized and hybrid dc-arc torches10.1351/pac200274030429 ↗
15. Properties of Hybrid Water/Gas DC Arc Plasma Torch10.1109/TPS.2006.878365 ↗
16. Liquid plasma spraying of NiO-YSZ anode layers applicable for SOFC
17. A review of RedOx cycling of solid oxide fuel cells anode10.3390/membranes2030585 ↗
18. S. Korneychuk, C. Grosselindemann, N. H. Menzler, A. Weber, and A. Pundt, “In-situ TEM reduction of a solid oxide cell with NiO / YSZ fuel electrode,” vol. 625, no. September 2024, 2025, doi: https://doi.org/10.1016/j.jpowsour.2024.235626.10.1016/j.jpowsour.2024.235626 ↗
19. A. P. Grosvenor, M. C. Biesinger, R. S. C. Smart, and N. S. Mcintyre, “New interpretations of XPS spectra of nickel metal and oxides,” vol. 600, pp. 1771–1779, 2006, doi: 10.1016/j.susc.2006.01.041.10.1016/j.susc.2006.01.041 ↗
20. Irreversible structural dynamics on the surface of bimetallic PtNi alloy catalyst under alternating oxidizing and reducing environments
21. H. W. Park et al., “Synthesis of Yttria-Stabilized Zirconia Nanospheres from Zirconium-Based Metal – Organic Frameworks and the Dielectric Properties,” 2023, doi: https://doi.org/10.3390/nano13010028.10.3390/nano13010028 ↗
22. Characterization of suspension plasma-sprayed solid oxide fuel cell electrodes10.1016/j.surfcoat.2010.06.001 ↗
23. Suspension plasma spraying to manufacture electrodes for solid oxide fuel cell (SOFC) and solid oxide electrolysis cell (SOEC)10.1149/1.3205570 ↗
24. Modelling of inhomogeneous mixing of plasma species in argon–steam arc discharge for broad range of operating conditions10.1140/epjd/e2019-100254-3 ↗
25. Modeling of argon–steam thermal plasma flow for abatement of fluorinated compounds10.1088/1361-6463/ac7aee ↗
26. Characterization of Ni–YSZ anodes for solid oxide fuel cells fabricated by solution precursor plasma spraying with axial feedstock injection10.1016/j.jpowsour.2013.09.035 ↗
27. On the Relationships between the kinetics and mechanisms of gaseous hydrogen reduction of solid nickel oxide10.1007/s11663-009-9239-x ↗
28. Mechanochemical reduction of nickel oxide with continuous hydrogen flow10.1039/D5MR00089K ↗
29. R. Chatterjee, S. S. Banerjee, S. S. Banerjee, and D. Ghosh, “Kinetics of reduction of NiO powder / pellets by hydrogen,” no. 3, pp. 1–6, 2015, doi: 10.13140/2.1.3786.7844.
30. Reduction and reoxidation kinetics of nickel-based SOFC anodes10.1149/1.2167949 ↗
31. Redox cycling of Ni‐based solid oxide fuel cell anodes: a review10.1002/fuce.200600028 ↗
32. Nickel–zirconia anode degradation and triple phase boundary quantification from microstructural analysis10.1002/fuce.200800147 ↗
33. Size-dependent nanoscale kirkendall effect during the oxidation of nickel nanoparticles10.1021/nn901736y ↗
34. R. Peter, I. Šarić, and M. Petravić, “Enhanced Oxidation of Nickel at Room Temperature by Low-energy Oxygen Implantation,” vol. 90, pp. 163–168, 2017, doi: 10.5562/cca3149.10.5562/cca3149 ↗
35. XPS study of the oxidation of nanosize Ni/Si(100) films10.1134/S002247661107016X ↗
36. G. J. Odhiambo, W. Li, Y. Zhao, and C. Li, “Porosity and Its Significance in Plasma Sprayed Coating: A Review,” Preprints. Preprints, 2019, doi: 10.20944/preprints201906.0112.v1.10.20944/preprints201906.0112.v1 ↗
37. Reduction kinetics of NiO–YSZ composite for application in solid oxide fuel cell10.1007/s10973-009-0237-7 ↗
38. Y. Kharchenko et al., “Nanostructural Changes in a Ni/NiO Cermet During High-Temperature Reduction and Reoxidation BT - Nanomaterials and Nanocomposites, Nanostructure Surfaces, and Their Applications,” 2021, pp. 219–229.10.1007/978-3-030-51905-6_17 ↗
39. H. Tagawa, D. Simwonis, F. Tietz, and D. Stover, “Nickel coarsening in annealed Ni / 8YSZ anode substrates for solid oxide fuel cells,” vol. 132, pp. 241–251, 2000.10.1016/S0167-2738(00)00650-0 ↗
40. Nickel oxide reduction by hydrogen: kinetics and structural transformations10.1021/acs.jpcc.5b04313 ↗
41. Kinetics of the reduction of nickel oxide by hydrogen10.1016/0009-2509(62)80039-6 ↗
42. The study of polycrystalline nickel metal oxidation by water vapour10.1016/j.elspec.2009.07.006 ↗