Enhancing nonaqueous Mg–CO2 battery performance via single-atom catalysts on nitride MXenes
Source abstract
Abstract
Magnesium–CO2 (Mg– CO2) batteries are emerging as a promising candidate for next-generation energy storage due to their high volumetric capacity and CO2 utilization, but their performance is limited by sluggish reaction kinetics and higher overpotentials. Here, we employ first-principles density functional theory (DFT) simulations to investigate the catalytic activity of 3d transition metals such as Ti, V, and Cr single atom catalysts (SACs) anchored on Ti2NO2 and elucidate the atomistic mechanisms governing Mg/CO2 conversion. Gibbs free energy analysis at open circuit potential reveals that SACs@Ti2NO2 facilitate an exothermic pathway for oxalate and carbonate formation. However, MgCO3 is identified as final discharge product instead of MgC2O4 across all SACs. Bader analysis reveals that CO2 remains inactive upon direct adsorption and becomes activated only after Mg adsorption through electron donation into antibonding orbitals. Electrochemical free-energy calculations yield low total overpotentials (ηt) of 0.57, 0.72, and 1.46 V for Ti, V, and Cr, respectively, outperforming reported catalysts such as RuO2 (2.65 V) and Mo2C (1.53 V). The d-band center is identified as an important electronic descriptor correlating with the predicted total overpotentials. These findings guide the design of efficient cathode catalysts for Mg–CO2 batteries, enhancing both energy storage and CO2 utilization.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: MXene and MAX Phase Materials · Ammonia Synthesis and Nitrogen Reduction · Advancements in Battery Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (68)
Show source-provided references
1. Fighting global warming by photocatalytic reduction of CO2 using giant photocatalytic reactors10.1016/j.rser.2012.10.026 ↗
2. Progress and perspectives of electrochemical CO2 reduction on copper in aqueous electrolyte10.1021/acs.chemrev.8b00705 ↗
3. Reduction of CO2 to chemicals and fuels: a solution to global warming and energy crisis10.1021/acsenergylett.8b00878 ↗
4. The path towards sustainable energy10.1038/nmat4834 ↗
5. Climate and energy challenges for materials science10.1038/nmat4545 ↗
6. Electrochemistry of metal-CO2 batteries: opportunities and challenges10.1016/j.ensm.2021.12.035 ↗
7. Renewable Energy for sustainable development in India: current status, future prospects, challenges, employment, and investment opportunities10.1186/s13705-019-0232-1 ↗
8. Recent advances in rechargeable metal–CO2 batteries with nonaqueous electrolytes10.1021/acs.chemrev.3c00167 ↗
9. Theoretical research on efficient electrocatalysis of CO2 reduction reaction by borophene loaded transition metals
10. Reaction mechanism of metal-free borophene catalyst electrochemical reduction of CO210.1016/j.colsurfa.2024.134933 ↗
11. Theoretical design of cage-like borophene single atom catalyst for high efficiency CO2 RR10.1021/acssuschemeng.5c02327 ↗
12. Homogeneously catalyzed electroreduction of carbon dioxide—methods, mechanisms, and catalysts10.1021/acs.chemrev.7b00459 ↗
13. A reversible lithium–CO 2 battery with ru nanoparticles as a cathode catalyst10.1039/C6EE03770D ↗
14. Carbon dioxide copolymers: emerging sustainable materials for versatile applications10.1002/sus2.2 ↗
15. Unraveling reaction mechanisms of Mo2C as cathode catalyst in a Li-CO2 battery10.1021/jacs.9b12868 ↗
16. Lithium-CO2 batteries and beyond10.3389/fenrg.2023.1150737 ↗
17. Understanding catalytic mechanisms and cathode interface kinetics in nonaqueous Mg–CO2 batteries10.1021/acsami.3c09599 ↗
18. Boosting a practical Li-CO2 battery through dimerization reaction based on solid redox mediator10.1038/s41467-024-45087-4 ↗
19. A nonaqueous Mg-CO2 battery with low overpotential10.1002/aenm.202201675 ↗
20. Quest for nonaqueous multivalent secondary batteries: magnesium and beyond10.1021/cr500049y ↗
21. Mg rechargeable batteries: an on-going challenge10.1039/c3ee40871j ↗
22. Advancing next-generation nonaqueous Mg–CO2 batteries: insights into reaction mechanisms and catalyst design10.1039/D3TA03287F ↗
23. Toward a lithium–“Air” battery: the effect of CO2 on the chemistry of a lithium–oxygen cell10.1021/ja4016765 ↗
24. Carbon dioxide assist for non-aqueous sodium–oxygen batteries10.1016/j.elecom.2012.10.036 ↗
25. A Li–O 2 /CO 2 battery10.1039/c0cc05176d ↗
26. A moisture-assisted rechargeable Mg−CO2 battery10.1002/ange.202200181 ↗
27. Boosted Mg−CO2 batteries by amine-mediated CO2 capture chemistry and Mg2+-conducting solid-electrolyte interphases10.1002/ange.202313264 ↗
28. Unraveling the effect of single atom catalysts on the charging behavior of nonaqueous Mg–CO 2 batteries: a combined density functional theory and machine learning approach10.1039/D3TA06742D ↗
29. High-rate nonaqueous Mg–CO2 batteries enabled by Mo2C-nanodot-embedded carbon nanofibers10.1002/smll.202306576 ↗
30. Recent progress in two-dimensional materials for electrocatalytic CO2 reduction10.3390/catal12020228 ↗
31. Nitrogen-anchored boridene enables Mg–CO2 batteries with high reversibility10.1021/jacs.4c00630 ↗
32. Abo Talas, S.; D Kolubah, P.; Khairova, R.; Alqahtani, M.; I. El-Hout, S.; M. Alissa, F.; K. El-Demellawi, J.; Castaño, P.; Omar Mohamed, H. MXene-based electrocatalysts for CO 2 reduction: advances, challenges, and perspectives. 2025. https://doi.org/10.1039/D5MH00905G.10.1039/D5MH00905G ↗
33. Step-by-step guide for synthesis and delamination of Ti3C2Tx MXene
34. Impact of various 2D MXene surface terminating groups in energy conversion10.1016/j.rser.2024.114506 ↗
35. Surface termination dependent carbon dioxide reduction reaction on Ti3C2 MXene10.1039/D4TA00320A ↗
36. MXene-based single-atom catalysts: synergistic interfaces and rational design for CO2 electrocatalytic reduction10.26599/NR.2025.94907748 ↗
37. Introduction: heterogeneous single-atom catalysis10.1021/acs.chemrev.0c01097 ↗
38. Metal oxides confine single atoms toward efficient thermal catalysis10.1016/j.ccr.2023.215189 ↗
39. Static regulation and dynamic evolution of single-atom catalysts in thermal catalytic reactions
40. Advances and challenges in MXene-based electrocatalysts: unlocking the potential for sustainable energy conversion10.1039/D4MH00845F ↗
41. Unveiling the mechanism of CO 2 electroreduction to C 1 and C 2 products of ordered double transition metal MXenes10.1039/D4SE00582A ↗
42. Cu anchored Ti2NO2 as high performance electrocatalyst for oxygen evolution reaction: a density functional theory study10.1002/cctc.202000591 ↗
43. Single molybdenum atom anchored on 2D Ti2 NO2 MXene as a promising electrocatalyst for N2 fixation10.1039/C9NR05402B ↗
44. Harnessing the potential of MXenes for electrochemical nitrogen and carbon dioxide reduction reactions: recent advances based on first-principles simulations10.1021/acsanm.6c00292 ↗
45. Theoretical investigation of defective MXenes as potential electrocatalysts for CO reduction toward C2 products10.1039/D1CP01291F ↗
46. Electrocatalytic nitrogen reduction directed through the P-band center of boron on B SAC @Mo 2 C10.1039/D1MA00953B ↗
47. Efficient iterative schemes for Ab Initio total-energy calculations using a plane-wave basis set10.1103/PhysRevB.54.11169 ↗
48. Projector augmented-wave method10.1103/PhysRevB.50.17953 ↗
49. From ultrasoft pseudopotentials to the projector augmented-wave method10.1103/PhysRevB.59.1758 ↗
50. Generalized gradient approximation made simple10.1103/PhysRevLett.77.3865 ↗
51. VASPKIT: a user-friendly interface facilitating high-throughput computing and analysis using VASP code10.1016/j.cpc.2021.108033 ↗
52. VESTA 3 for three-dimensional visualization of crystal, volumetric and morphology data10.1107/S0021889811038970 ↗
53. LOBSTER: a tool to extract chemical bonding from plane-wave based DFT10.1002/jcc.24300 ↗
54. Stability of heterogeneous single-atom catalysts: a scaling law mapping thermodynamics to kinetics10.1038/s41524-020-00411-6 ↗
55. The effect of coordination environment on the kinetic and thermodynamic stability of single-atom iron catalysts10.1039/C9CP05349B ↗
56. Liu, L.; Chen, T.; Chen, Z. Understanding the dynamic aggregation in single‐atom catalysis. https://doi.org/10.1002/advs.202308046.10.1002/advs.202308046 ↗
57. Transition metal atom adsorption on the titanium carbide MXene: trends across the periodic table for the bare and O-terminated surfaces10.1103/PhysRevMaterials.6.105801 ↗
58. Work function and energy level alignment tuning at Ti3C2Tx MXene surfaces and interfaces using (metal-)organic donor/acceptor molecules
59. MXene-based single-atom catalysts for electrochemical reduction of CO2 to hydrocarbon fuels10.1021/acs.jpcc.3c04732 ↗
60. Advancing electrocatalysis through density functional theory: from reaction mechanisms to machine learning integration10.1016/j.jcou.2025.103192 ↗
61. CO2 activation on single-atom catalysts: importance of the supporting matrix10.1007/s11244-025-02064-5 ↗
62. Formation of carbonate and oxalate species on a cobalt-modified Fe3O4(111) surface: comparison of DFT+U, hybrid functionals, and the random phase approximation10.1016/j.susc.2022.122068 ↗
63. Solvation effects on DFT predictions of ORR activity on metal surfaces10.1016/j.cattod.2018.07.036 ↗
64. On the challenge of obtaining an accurate solvation energy estimate in simulations of electrocatalysis10.1007/s11244-023-01829-0 ↗
65. Lithium peroxide growth in Li–O2 batteries via chemical disproportionation and electrochemical mechanisms: a potential-dependent ab initio study with implicit solvation10.1021/acs.jpcc.0c08610 ↗
66. Crystal orbital hamilton populations (COHP): energy-resolved visualization of chemical bonding in solids based on density-functional calculations10.1021/j100135a014 ↗
67. Crystal orbital hamilton population (COHP) analysis as projected from plane-wave basis sets10.1021/jp202489s ↗
68. High-throughput computation and machine learning prediction accelerating the design of cathode catalysts for Li–CO2 batteries10.1021/acs.jpcc.4c02641 ↗