journal article·2026-11Open access

Surface engineering of 3D-printed PLA scaffolds via γ-ray-induced acrylic acid grafting: pH-responsiveness and antimicrobial properties

Alejandro Seijo-Rabina, Maria Vivero-Lopez, Y. Aylin Esquivel-Lozano, Xián Farto-Vaamonde, Luis Diaz-Gómez, Emilio Bucio, Angel Concheiro, Carmen Alvarez-Lorenzo

Abstract

Additive manufacturing is enabling unprecedented control over scaffold architecture for biomedical applications, yet the limited chemical functionality and surface responsiveness of commonly printed thermoplastics remain a major bottleneck. Here, we present a hybrid strategy that combines extrusion-based 3D printing of poly(lactic acid) (PLA) scaffolds with γ-ray–induced graft polymerization of acrylic acid (AAc) to obtain pH-responsive and antibacterial 4D scaffolds. 3D patterned PLA scaffolds were functionalized via γ-irradiation using pre-irradiation and direct grafting protocols within sterilization-relevant dose ranges. PolyAAc nanobrushes were successfully grafted onto the scaffold strands while preserving the original 3D architecture when grafting conditions were optimized. Direct γ-ray grafting in ethanol at 10 kGy provided superior reproducibility, scaffold stability, and process sustainability compared with pre-irradiation methods. The grafting degree was a key parameter controlling performance: grafting levels of ≈10% conferred reversible pH-triggered swelling and a hydrogel-like surface while maintaining mechanical integrity and excellent compatibility with human cells, whereas higher grafting levels induced excessive swelling and scaffold delamination. PolyAAc grafting further enabled the incorporation of benzalkonium chloride and chlorhexidine, imparting strong antibacterial activity against Staphylococcus aureus and Pseudomonas aeruginosa . Overall, this work demonstrates a scalable route to engineer multifunctional, stimuli-responsive hybrid scaffolds by integrating 3D printing with radiation chemistry.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: 3D Printing in Biomedical Research · Hydrogels: synthesis, properties, applications · biodegradable polymer synthesis and properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (67)

Show source-provided references
1. Recent advances in design optimization and additive manufacturing of composites: from enhanced mechanical properties to innovative functionalities10.1038/s44334-025-00040-1 ↗
2. Role of additive manufacturing applications towards environmental sustainability
3. Recent advances of additive manufacturing in implant fabrication – a review10.1016/j.apsadv.2023.100462 ↗
4. 3D printing and biomedical applications of piezoelectric composites: a critical review
5. Multimaterial multinozzle adaptive 3D printing of soft materials10.1002/admt.202101710 ↗
6. Multi-material additive manufacturing of sustainable innovative materials and structures10.3390/polym11010062 ↗
7. Multi-material fused filament fabrication: an expedited methodology to assess the affinity between different materials10.1007/s40964-022-00322-6 ↗
8. Perimeter and carvacrol-loading regulate angiogenesis and biofilm growth in 3D printed PLA scaffolds10.1016/j.jconrel.2022.10.060 ↗
9. 3D-printed hydrogels in orthopedics: developments, limitations, and perspectives
10. Towards 4D printing in pharmaceutics
11. 4D printed hydrogels for precision delivery of bioactive molecules in cancer10.1080/17425247.2025.2539959 ↗
12. pH-responsive scaffolds for tissue regeneration: in vivo performance10.1016/j.actbio.2023.07.025 ↗
13. Advances in smart hybrid scaffolds: a strategic approach for regenerative clinical applications
14. Stimuli-responsive polymers for antimicrobial therapy: drug targeting, contact-killing surfaces and competitive release10.1080/17425247.2016.1178719 ↗
15. Cartilage tissue engineering: preventing tissue scaffold contraction using a 3D-printed polymeric cage10.1089/ten.tec.2016.0073 ↗
16. Poly(lactic acid) modifications10.1016/j.progpolymsci.2009.12.003 ↗
17. Poly(lactic acid)-based graft copolymers: syntheses strategies and improvement of properties for biomedical and environmentally friendly applications: a review10.3390/molecules27134135 ↗
18. Radiation syntheses of modified poly (lactic acid) fabrics with hydrophilic and antibacterial properties
19. A green approach for the preparation of antibacterial polylactide fabric via radiation-induced graft polymerization and copper complexation10.1016/j.polymertesting.2025.109003 ↗
20. Surface modification of polylactic acid films with acrylic acid plasma to modify the fibroblast viability10.1557/s43578-025-01698-1 ↗
21. Medical devices modified at the surface by gamma-ray grafting for drug loading and delivery10.1517/17425240903483174 ↗
22. Polymerization reactions and modifications of polymers by ionizing radiation10.3390/polym12122877 ↗
23. Functionalization of silicone catheters by grafting hydroxyethyl methacrylate and N‑vinylcaprolactam using gamma radiation for drug loading and release studies10.1557/s43579-025-00853-3 ↗
24. New effective ways of polypropylene and polylactide nonwovens functionalization10.1080/00405000.2024.2379221 ↗
25. European Medicines Agency. Guideline on the sterilisation of the medicinal product, active substance, excipient and primary container. 2019. https://www.ema.europa.eu/en/sterilisation-medicinal-product-active-substance-excipient-primary-container-scientific-guideline. Accessed December 2025.
26. Validation of 11 kGy as a radiation sterilization dose for frozen bone allografts10.1016/j.arth.2010.03.032 ↗
27. Disinfectant-induced bacterial resistance and antibiotic cross-resistance—mechanisms and clinical relevance10.1007/s10238-025-01950-2 ↗
28. Chlorhexidine and benzalkonium chloride: promising adjuncts in combating multidrug resistant Klebsiella pneumoniae in healthcare settings10.1186/s12879-025-10980-w ↗
29. In-situ formation of silver nanoparticles on poly(lactic acid) film by γ-radiation induced grafting of N-vinyl pyrrolidone10.1016/j.msec.2016.01.077 ↗
30. Rheological characterization of bioadhesive binary polymeric systems designed as platforms for drug delivery implants10.1021/bm050620y ↗
31. Processing of poly(lactic acid): Characterization of chemical structure, thermal stability and mechanical properties10.1016/j.polymdegradstab.2009.11.045 ↗
32. Poly(lactic acid) production for tissue engineering applications10.1016/j.proeng.2012.07.534 ↗
33. Effect of uniaxial tensile cyclic loading regimes on matrix organization and tenogenic differentiation of adipose-derived stem cells encapsulated within 3D collagen scaffolds10.1155/2017/6072406 ↗
34. Development and evaluation of surface modified poly (lactic acid) microsphere via irradiation techniques for drug delivery system10.1016/j.proche.2016.03.026 ↗
35. Controlled degradation of polylactic acid grafting N‐vinyl pyrrolidone induced by gamma ray radiation10.1002/app.39243 ↗
36. On reducing anisotropy in 3D printed polymers via ionizing radiation10.1016/j.polymer.2014.07.054 ↗
37. Effects of two melt extrusion based additive manufacturing technologies and common sterilization methods on the properties of a medical grade PLGA copolymer10.3390/polym13040572 ↗
38. The effect of gamma radiation sterilization on dental biomaterials10.1007/s13770-014-0016-9 ↗
39. Nano drug delivery systems and gamma radiation sterilization10.3109/10837450.2016.1163393 ↗
40. International Organization for Standardization. ISO 11137-1:2025. Sterilization of health care products — Radiation. Part 1: Requirements for the development, validation and routine control of a sterilization process for medical devices. Geneva, ISO, 2025. https://www.iso.org/standard/81721.html; accessed January 2026.
41. Binary graft of poly(N-vinylcaprolactam) and poly(acrylic acid) onto chitosan hydrogels using ionizing radiation for the retention and controlled release of therapeutic compounds10.3390/polym13162641 ↗
42. Preparation and characterization of interpenetrating networks based on polyacrylates and poly(lactic acid)10.3144/expresspolymlett.2012.9 ↗
43. Effect of hydrogen bonding on the glass transition behavior of poly(acrylic acid)/silica hybrid materials prepared by sol–gel process10.1016/S0032-3861(01)00091-X ↗
44. Dehydration kinetics and glass transition of poly(acrylic acid)10.1002/pol.1969.150070714 ↗
45. Numerical analysis applying a complex model of the foot bone structure under loading conditions during race walking practice10.3390/computation13110249 ↗
46. High-strength porous biomaterials for bone replacement: a strategy to assess the interplay between cell morphology, mechanical properties, bone ingrowth and manufacturing constraints10.1016/j.actbio.2015.10.048 ↗
47. Mechanical analysis and sensitivity evaluation of PLA scaffolds for bone tissue repair using FEA and Taguchi experimental design
48. Morphological and mechanical characterization of 3D printed PLA scaffolds with controlled porosity for trabecular bone tissue replacement10.1016/j.msec.2020.111528 ↗
49. Non-destructive optical measurement of transparent objects: a review
50. Hydrophilic and antibacterial modification of poly(lactic acid) films by γ-ray irradiation10.1021/acsomega.9b03132 ↗
51. Effect of gamma irradiation on the PLA-based blends and biocomposites containing rosemary ethanolic extract and chitosan10.3390/polym14071398 ↗
52. Temperature- and pH-sensitive IPNs grafted onto polyurethane by gamma radiation for antimicrobial drug-eluting insertable devices10.1002/app.39992 ↗
53. Swelling behavior of acrylic acid hydrogels prepared by gamma-radiation crosslinking of polyacrylic acid in aqueous solution10.1016/S0014-3057(00)00044-6 ↗
54. Determination of the carboxyl dissociation degree and pKa value of mono and polyacid solutions by FTIR titration10.1002/macp.202000334 ↗
55. Effect of printing layer thickness on water absorption and mechanical properties of 3D-printed wood/PLA composite materials10.1007/s00170-019-03299-9 ↗
56. Effect of protective coatings on the water absorption and mechanical properties of 3D printed PLA10.3221/IGF-ESIS.48.68 ↗
57. Laser-assisted micropatterned 3D printed scaffolds with customizable surface topography and porosity for modulation of cell function10.1002/adhm.202403992 ↗
58. Strategies to modify the surface and bulk properties of 3D-printed solid scaffolds for tissue engineering applications10.1021/acsomega.2c05984 ↗
59. Post-plasma grafting of AEMA as a versatile tool to biofunctionalise polyesters for tissue engineering10.1002/mabi.201000147 ↗
60. Fibronectin activity on substrates with controlled -OH density10.1002/jbm.a.32374 ↗
61. Association between benzalkonium chloride and a poly(acrylic acid) gel. Study by microfiltration and membrane dialysis10.1016/0376-7388(96)00154-8 ↗
62. Biofilm formation in Staphylococcus implant infections. A review of molecular mechanisms and implications for biofilm-resistant materials10.1016/j.biomaterials.2012.05.031 ↗
63. Deposition and release of chlorhexidine from non-ionic and anionic polymer matrices10.2478/s11696-010-0013-y ↗
64. Study of combined effect of bacteriophage vB3530 and chlorhexidine on the inactivation of Pseudomonas aeruginosa10.1186/s12866-023-02976-w ↗
65. Phenotypic and genotypic changes of Staphylococcus aureus in the presence of the inappropriate concentration of chlorhexidine gluconate10.1186/s12866-022-02522-0 ↗
66. Antimicrobial efficacy of chlorhexidine-treated surfaces against clinical isolates implicated in nosocomial infections10.1099/jmm.0.002025 ↗
67. Benzalkonium chlorides: uses, regulatory status, and microbial resistance10.1128/AEM.00377-19 ↗