Electrophoretically deposited curcumin/sodium alginate coatings enhanced with cellulose nanofibers for short-term titanium bone implants
Source abstract
Abstract
The aim of this study was to develop multicomponent sodium alginate (SA)/curcumin (CURC) coatings enhanced with cellulose nanofibers (CNFs) on titanium substrates. Electrophoretic deposition (EPD) was employed to fabricate the coatings, and their microstructure, adhesion performance, surface properties and antibacterial activity were subsequently investigated. The suspension containing all of the coating components exhibited a highly negative zeta potential at the deposition pH, confirming its suitability for anodic EPD. It was possible to obtain coatings featuring uniformly distributed spherical CURC particles embedded within the polymeric matrix, along with CNFs of varying diameters and lengths. The coating roughness increased with the rise in the CURC content in the suspension used for the EPD. Additionally, all of the coated substrates demonstrated reduced water contact angle in comparison to that of the uncoated chemically etched titanium substrate. A significant reduction in current densities and an increase in impedance values for coated samples suggest an improvement in corrosion immunity in Hanks’ solution in contrast to the bare Ti substrate. Microbiological studies have also confirmed the superb antibacterial effect of elaborated coatings against the S. aureus strain. These findings highlight the potential of SA/CURC/CNF coatings as a promising natural strategy for mitigating biofilm growth on titanium bone implants.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Bone Tissue Engineering Materials · Electrospun Nanofibers in Biomedical Applications · Mesoporous Materials and Catalysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (76)
Show source-provided references
1. Alginate: properties and biomedical applications10.1016/j.progpolymsci.2011.06.003 ↗
2. Role of alginate in antibacterial finishing of textiles10.1016/j.ijbiomac.2016.10.054 ↗
3. Alginate based polymeric systems for drug delivery, antibacterial/microbial, and wound dressing applications
4. Sodium alginate - natural microencapsulation material of polymeric microparticles10.3390/ijms232012108 ↗
5. Main properties and current applications of some polysaccharides as biomaterials10.1002/pi.2378 ↗
6. Electrophoretic deposition of polymers and proteins for biomedical applications10.1016/j.cis.2020.102272 ↗
7. Cinnamon oils and their main constituents as natural antibacterial agents of sodium alginate coatings electrophoretically deposited on austenitic stainless steel substrates10.1007/s11661-025-07736-1 ↗
8. Bimetallic alginate nanocomposites: new antimicrobial biomaterials for biomedical application10.1016/j.matlet.2017.10.046 ↗
9. Alginate-based composite materials for wound dressing application: a mini review10.1016/j.carbpol.2020.116025 ↗
10. New antibacterial hydrogels based on sodium alginate10.1016/j.ijbiomac.2023.125872 ↗
11. Electrophoretic deposition of nanostructured TiO2/alginate and TiO2-bioactive glass/alginate composite coatings on stainless steel10.1179/1743676113Y.0000000096 ↗
12. Physical and antibacterial properties of sodium alginate—sodium carboxymethylcellulose films containing lactococcus lactis10.3390/molecules23102645 ↗
13. Influence of Si3N4 and CuO nanoparticles on the microstructure and properties of multiphase graphite oxide/hydroxyapatite/sodium alginate coatings obtained by electrophoretic deposition on titanium alloy10.1149/1945-7111/ac9340 ↗
14. Clindamycin-based 3D-printed and electrospun coatings for treatment of implant-related infections10.3390/ma14061464 ↗
15. Layer-by-layer self-assembly of minocycline-loaded chitosan/alginate multilayer on titanium substrates to inhibit biofilm formation10.1016/j.jdent.2014.06.003 ↗
16. Curcumin as a wound healing agent10.1016/j.lfs.2014.08.016 ↗
17. Curcumin, a natural antimicrobial agent with strain-specific activity10.3390/ph13070153 ↗
18. Studies on curcumin and curcuminoids10.1007/BF01027775 ↗
19. Curcumin: a review of its effects on human health10.3390/foods6100092 ↗
20. Electrophoretic deposition and characterization of curcumin/chitosan coatings10.1149/1945-7111/ad6507 ↗
21. Antioxidant pathways and chemical mechanism of curcumin10.4028/www.scientific.net/AMR.236-238.2311 ↗
22. Electrophoretic deposition of curcumin-loaded mesoporous bioactive glass nanoparticle-chitosan composite coatings on titanium for treating tumor-induced bone defect10.1016/j.compositesb.2024.111950 ↗
23. Alginate biopolymer coatings obtained by electrophoretic deposition on Ti15Mo alloy10.12693/APhysPolA.125.919 ↗
24. A review on the mechanical methods for evaluating coating adhesion10.1007/s00707-013-0979-y ↗
25. Impact of surface topography, chemistry and properties on the adhesion of sodium alginate coatings electrophoretically deposited on titanium biomaterials10.1007/s11661-021-06397-0 ↗
26. Electrophoretic deposition, microstructure and properties of multicomponent sodium alginate-based coatings incorporated with graphite oxide and hydroxyapatite on titanium biomaterial substrates10.1016/j.apsusc.2021.151688 ↗
27. Cathodic electrodeposition of organic nanocomposite coatings reinforced with cellulose nanocrystals10.1039/D3SM00505D ↗
28. Effect of cellulose type on microstructure and properties of cellulose/curcumin/chitosan coatings obtained on titanium substrates by electrophoretic deposition10.1016/j.apsusc.2025.163788 ↗
29. Review on nanocrystalline cellulose in bone tissue engineering applications10.3390/polym12122818 ↗
30. Comprehensive review on nanocellulose: recent developments, challenges and future prospects10.1016/j.jmbbm.2020.103884 ↗
31. A comprehensive review on cellulose nanocrystals and cellulose nanofibers: pretreatment, preparation, and characterization10.1002/pc.25929 ↗
32. A review of properties of nanocellulose, its synthesis, and potential in biomedical applications10.3390/app12147090 ↗
33. Microtubules and cellulose biosynthesis: the emergence of new players10.1016/j.pbi.2015.09.002 ↗
34. Materials chemistry and the futurist eco-friendly applications of nanocellulose: status and prospect10.1016/j.jscs.2018.02.005 ↗
35. Electrophoretic deposition of cellulose nanocrystals (CNs) and CNs/alginate nanocomposite coatings and free standing membranes10.1016/j.colsurfb.2014.03.022 ↗
36. Recent developments in electrophoretic deposition (EPD) of antibacterial coatings for biomedical applications - a review
37. Electrophoretically deposited titanium and its alloys in biomedical engineering: recent progress and remaining challenges10.1002/jbm.b.35342 ↗
38. Electrophoretic deposition of biomaterials10.1098/rsif.2010.0156.focus ↗
39. A review on fundamentals and applications of electrophoretic deposition (EPD)10.1016/j.pmatsci.2006.07.001 ↗
40. Electrophoretic deposition of chitosan-based composite coatings for biomedical applications: a review10.1016/j.pmatsci.2019.01.001 ↗
41. Hydroxyapatite/sodium alginate coatings electrophoretically deposited on titanium substrates: microstructure and properties10.1016/j.apsusc.2020.148353 ↗
42. Edible chitosan-alginate based coatings enriched with turmeric and oregano additives: formulation, antimicrobial and non-cytotoxic properties10.1016/j.foodchem.2023.136662 ↗
43. A.K. Nasution, H. Hermawan, Degradable biomaterials for temporary medical implants, in: F. Mahyudin, H. Hermawan (Eds.), Biomater. Med. Devices Perspect. Emerg. Ctry., Springer International Publishing, Cham, 2016: pp. 127–160. doi: 10.1007/978-3-319-14845-8_6.10.1007/978-3-319-14845-8_6 ↗
44. W. Jin, P.K. Chu, Orthopedic Implants, in: Encycl. Biomed. Eng., Elsevier, 2019, pp. 425–439. doi: 10.1016/B978-0-12-801238-3.10999-7.10.1016/B978-0-12-801238-3.10999-7 ↗
45. Effect of stainless steel substrate preparation on the adhesion strength and morphology of electrophoretically deposited sodium alginate coatings10.1007/s11661-024-07538-x ↗
46. Nanoscale friction and growth of surface oxides on a metallic glass under electrochemical polarization10.1016/j.triboint.2021.106925 ↗
47. Electrophoretic deposition forming of porous alumina membranes10.1016/S1359-6454(99)00140-8 ↗
48. Methodology for selection of charging agents for electrophoretic deposition of ceramic particles10.1023/B:JMSC.0000012908.18329.93 ↗
49. Composite ceramic-metal coatings by means of combined electrophoretic deposition and galvanic methods10.1023/B:JMSC.0000012912.96350.d2 ↗
50. Charging and aggregation behavior of cellulose nanofibers in aqueous solution10.1021/acs.langmuir.7b02742 ↗
51. Improved process to obtain nanofibrillated Cellulose (CNF) reinforced starch films with upgraded mechanical properties and barrier character10.3390/polym12051071 ↗
52. Tuning rheology and aggregation behaviour of TEMPO-oxidised cellulose nanofibrils aqueous suspensions by addition of different acids10.1016/j.carbpol.2020.116109 ↗
53. Electrophoretic deposition of bioactive glass/polymer composite coatings with and without HA nanoparticle inclusions for biomedical applications10.1016/j.jmatprotec.2008.04.034 ↗
54. The molecular basis for the pharmacokinetics and pharmacodynamics of curcumin and its metabolites in relation to cancer10.1124/pr.110.004044 ↗
55. Characterization of stress degradation products of curcumin and its two derivatives by UPLC–DAD–MS/MS10.1016/j.arabjc.2016.02.003 ↗
56. Physical and chemical stability of curcumin in aqueous solutions and emulsions: impact of pH, temperature, and molecular environment10.1021/acs.jafc.6b04815 ↗
57. The chemistry of curcumin: from extraction to therapeutic agent10.3390/molecules191220091 ↗
58. M. Papini, J.K. Spelt, The mechanics of coatings, in: Adhes. Sci. Eng., Elsevier, 2002, pp. 303–350. doi: 10.1016/B978-0-444-51140-9.50036-6.10.1016/B978-0-444-51140-9.50036-6 ↗
59. Mechanical properties of alginate hydrogels cross-linked with multivalent cations10.3390/polym15143012 ↗
60. Next-generation biomaterials: advanced coatings and smart interfaces for implant technology: a narrative review10.3390/coatings16010087 ↗
61. Bacterial anti-adhesion surface design: surface patterning, roughness and wettability: a review10.1016/j.jmst.2021.05.028 ↗
62. Adhesion of Staphylococcus aureus and Staphylococcus xylosus to materials commonly found in catering and domestic kitchens10.1016/j.foodcont.2016.07.044 ↗
63. Bio-inspired YSZ coated titanium by EB-PVD for biomedical applications10.1016/j.surfcoat.2016.08.039 ↗
64. Surface antibacterial properties enhanced through engineered textures and surface roughness: a review10.1016/j.colsurfb.2023.113584 ↗
65. Electrophoretic deposition of nanocrystalline hydroxyapatite on Ti6Al4V/TiO2 substrate10.1007/s11998-012-9438-2 ↗
66. A quantitative assessment of the influence of voltage on the formation of oxide layers on the surface of titanium by anodization
67. A new approach to replace antibiotics with natural pigment derivatives: Surface modification on the titanium implants10.1016/j.apsusc.2022.155122 ↗
68. Electrophoretic deposition of antibiotic loaded PHBV microsphere-alginate composite coating with controlled delivery potential10.1016/j.colsurfb.2015.04.009 ↗
69. Antibacterial coatings on titanium implants10.1002/jbm.b.31463 ↗
70. Electrophoretically deposited chitosan/Eudragit E 100/AgNPs composite coatings on titanium substrate as a silver release system10.3390/ma14164533 ↗
71. The influence of niobium and vanadium on passivity of titanium-based implants in physiological solution10.1016/S0142-9612(03)00252-7 ↗
72. Implication of surface properties, bacterial motility, and hydrodynamic conditions on bacterial surface sensing and their initial adhesion10.3389/fbioe.2021.643722 ↗
73. Functional hydrogel coatings10.1093/nsr/nwaa254 ↗
74. Outer membrane permeability and antibiotic resistance10.1016/j.bbapap.2008.11.005 ↗
75. Effects of curcumin on the proliferation and mineralization of human osteoblast-like cells: implications of nitric oxide10.3390/ijms131216104 ↗
76. Design of innovative biocompatible cellulose nanostructures for the delivery and sustained release of curcumin10.3390/pharmaceutics15030981 ↗