journal article·2026-11Open access

Room-temperature NO2 sensing with engineered MoSe2 via tailored exfoliation and self-assembly

Alessio Teruzzi, Elmehdi Ould-Maina, Ran Li, Inass El Hajj, Kassiogé Dembele, Adam H. Denawi, Holger Vach, Fatima Z. Bouanis

Abstract

Atmospheric nitrogen dioxide (NO 2 ) is a harmful air pollutant, and its reliable detection at room temperature (RT) under ambient conditions remains a significant major challenge for gas-sensing technologies. Two-dimensional transition metal dichalcogenides (TMDs), such as MoSe 2 , have attracted considerable interest for gas-sensing applications due to their high surface area, unique electronic properties and narrow bandgap. However, the lack of scalable, cost-effective, and reproducible synthesis and film fabrication methods for TMDs significantly limits their practical deployment as gas sensors. In this work, we report a tailored liquid-phase shear (LPSE) exfoliation method combined with an interfacial self-assembly approach to produce MoSe 2 nanosheets (2–5 layers) with high crystalline quality and narrow lateral size distribution (70–110 nm). Highly stacked, interconnected and continuous MoSe 2 ultrathin films (∼40 nm) were successfully fabricated via controlled interfacial self-assembly approach. The resulting MoSe 2 -based chemiresistive sensor exhibits high response toward NO 2 (17.5% at 100 ppb), along with good selectivity, repeatability and stable performance under ambient conditions. This work demonstrates an effective, low-cost structural engineering strategy to overcome the limitations of TMD-based gas sensors and highlights the potential of MoSe 2 for RT NO 2 sensing applications.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: 2D Materials and Applications · Gas Sensing Nanomaterials and Sensors · Transition Metal Oxide Nanomaterials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (51)

Show source-provided references
1. Identifying the sources of primary air pollutants and environmental health: a review
2. Disproportionately large impacts of wildland-urban interface fire emissions on global air quality and human health10.1126/sciadv.adr2616 ↗
3. Impacts of climate change on the fate of contaminants through extreme weather events10.1016/j.scitotenv.2023.168388 ↗
4. Selectivity in chemiresistive gas sensors: strategies and challenges10.1021/acs.chemrev.4c00592 ↗
5. Metal oxide semiconductors for gas sensors: a comprehensive review of materials, mechanisms, and performance10.1016/j.mssp.2025.110280 ↗
6. Gas sensing in 2D materials10.1063/1.4983310 ↗
7. Emerging 2D materials beyond mxenes and TMDs: transition metal carbo-chalcogenides10.1016/j.pmatsci.2024.101287 ↗
8. Recent developments in transition metal selenide-based materials for energy storage, conversion, generation, environmental remediation, and sensing10.1007/s10904-024-03199-w ↗
9. NO2 sensors based on crystalline MoSe2 porous nanowall thin films with vertically aligned molecular layers prepared by sputtering10.1016/j.snb.2022.131552 ↗
10. Interlayer engineering and electronic regulation of MoSe2 nanosheets rolled hollow nanospheres for high-performance sodium-ion half/full batteries
11. Interactions of gas molecules with monolayer MoSe2: a first principle study
12. Energy-efficient NO2 sensors based on two-dimensional layered 2H-WS2 nanosheets10.1016/j.snb.2024.135379 ↗
13. Correlation between lateral size and gas sensing performance of MoSe2 nanosheets
14. Two-dimensional MoSe2 nanosheets via liquid-phase exfoliation for high-performance room temperature NO2 gas sensors10.1088/1361-6528/ab35ec ↗
15. Liquid shear exfoliation of mos2: preparation, characterization, and NO2-sensing properties10.3390/nano13182502 ↗
16. Scalable fabrication of high-quality WS2 thin films via solution processing for NO2 sensing
17. Scalable fabrication of a Ti3C2Tx-MXene@graphene-based humidity sensor via MILD etching and interfacial self-assembly
18. Self-assembled Ti3C2Tx MXene thin films for high-performance ammonia sensors10.1016/j.apsusc.2024.160864 ↗
19. The marangoni effect10.1038/187186a0 ↗
20. Transverse phase diffusion in Rayleigh-Bénard convection10.1051/jphyslet:01982004308025300 ↗
21. A self-interaction corrected approach to many-electron systems: beyond the local spin density approximation10.1016/0038-1098(80)91101-1 ↗
22. Ab. initio molecular dynamics for liquid metals10.1103/PhysRevB.47.558 ↗
23. Efficient iterative schemes for ab initio total-energy calculations using a plane-wave basis set10.1103/PhysRevB.54.11169 ↗
24. Projector augmented-+rave method10.1103/PhysRevB.50.17953 ↗
25. Generalized gradient approximation made simple10.1103/PhysRevLett.77.3865 ↗
26. A consistent and accurate ab initio parametrization of density functional dispersion correction (DFT-D) for the 94 elements H-Pu10.1063/1.3382344 ↗
27. Special points for Brillonin-zone integrations10.1103/PhysRevB.13.5188 ↗
28. Liquid phase exfoliation of MoSe2: effect of solvent on morphology, edge confinement, bandgap and number of layers study10.1016/j.mex.2023.102409 ↗
29. Preparation of liquid-exfoliated transition metal dichalcogenide nanosheets with controlled size and thickness: a state of the art protocol
30. Edge and confinement effects allow in situ measurement of size and thickness of liquid-exfoliated nanosheets10.1038/ncomms5576 ↗
31. Quality by design-driven zeta potential optimisation study of liposomes with charge imparting membrane additives10.3390/pharmaceutics14091798 ↗
32. MoSe2 dispersed in stabilizing surfactant media: effect of the surfactant type and concentration on electron transfer and catalytic properties10.1021/acsami.7b19744 ↗
33. Synthesis and characterization of highly crystalline vertically aligned WSe2 nanosheets
34. Influence of magnetron configurations on the structure and properties of room temperature sputtered ZnO thin films10.1088/1402-4896/abcc1b ↗
35. Sathe, Unraveling the phonon scattering mechanism in exfoliated MoSe2 nanosheets using temperature-dependent Raman spectroscopy10.1007/s10854-022-08074-3 ↗
36. Comparison of liquid exfoliated transition metal dichalcogenides reveals MoSe2 to be the most effective hydrogen evolution catalyst10.1039/C5NR08553E ↗
37. Structure and tribological properties of MoSe2 films prepared by two-step process10.1016/S1003-6326(23)66275-2 ↗
38. New first order Raman-active modes in few layered transition metal dichalcogenides10.1038/srep04215 ↗
39. Large-area synthesis of monolayer MoSe2 films on SiO2/Si substrates by atmospheric pressure chemical vapor deposition10.1039/C7RA03642F ↗
40. Thermally driven crossover from indirect toward direct bandgap in 2D Semiconductors: MoSe2 versus MoS210.1021/nl302584w ↗
41. Spectroscopic analysis on different stacking configurations of multilayered MoSe2
42. MoSe2-GO/rGO composite catalyst for hydrogen evolution reaction10.3390/polym10121309 ↗
43. Hydrothermal growth of MoSe2 nanoflowers for photo- and humidity sensor applications10.1016/j.sna.2019.05.045 ↗
44. Plasma functionalized MoSe2 for efficient nonenzymatic sensing of hydrogen peroxide in ultra-wide pH range
45. Understanding the gas sensing mechanism of MoSe2 nanoroses and rGO composite-based chemiresistive sensors for room temperature NO2 detection10.1016/j.cej.2024.158178 ↗
46. Humidity-enhanced NO2 gas sensing using atomically sharp edges in multilayer MoS210.1002/sstr.202400409 ↗
47. Enhanced sensitivity of MoSe2 monolayer for gas adsorption induced by electric field10.1088/1361-648X/ab29d8 ↗
48. MoSe2-based room temperature gas sensor with a sub-parts-per-billion limit for ammonia and N,N-dimethylformamide10.1039/D4MA01169D ↗
49. Liquid exfoliated pristine WS2 nanosheets for ultrasensitive and highly stable chemiresistive humidity sensors10.1088/0957-4484/27/47/475503 ↗
50. Adsorption and dissociation of H2O on Au(111) surface: a DFT study10.1016/j.comptc.2013.07.009 ↗
51. Recent advances in single fluorescent probes for monitoring dual organelles in two channels