journal article·2026-11Open access

First-principles study of chemical species adsorption and solid electrolyte interphase formation on defective sodium metal anodes

Tapasendra Adhikary, Iván Ornelas–Cruz, Tuanan C. Lourenço, Sara Barati, Luís G. Dias, Juarez L.F. Da Silva

Abstract

The solid electrolyte interphase (SEI) on sodium metal anodes governs passivation and ion transport, but its early formation, controlled by chemical species–defect interactions, remains insufficiently understood at the atomic scale. Using density functional theory calculations, we investigate the adsorption of 22 chemical species that include electrolyte solvents, salts, and decomposed species on the defective substrate, which contains terraces, clusters of adatoms, and multi-atom vacancies. Analysis of optimized structures and charge transfer shows that undercoordinated defect sites, such as pyramidal adatom clusters and vacancy rims, constitute highly reactive regions that strongly polarize adsorbed species, induce significant surface reconstruction, and promote charge transfer-assisted activation of electrolyte molecules. This activation fragments salt-anion intermediates and yields compact inorganic phases that form ionic bonds with undercoordinated Na sites in defects, accounting for the preferential formation of an inorganic-rich SEI at the most reactive surface regions. In contrast, carbonate solvents exhibit minimal charge transfer, negligible molecular distortion, and moderate adsorption energies, indicating that they remain largely intact upon contact and affect the interface mainly through polarization and the Pauli-repulsion effect. Organic SEI fragments bind with intermediate strength through localized coordination while their alkyl groups remain electronically passive, consistent with their prevalence in the more dynamic and solvent-accessible outer SEI region. Small volatile decomposition products show weak physisorption and preferentially desorb rather than incorporate into the interphase. These results relate morphological heterogeneity to site-specific reactivity and support electrolyte selection criteria that favor compact inorganic nucleation at undercoordinated defects while limiting pathways associated with dendrite-promoting protrusion growth and parasitic side reactions.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Advanced Battery Materials and Technologies · Membrane-based Ion Separation Techniques · Thermal Expansion and Ionic Conductivity

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (82)

Show source-provided references
1. High-energy lithium-ion batteries: Recent progress and a promising future in applications10.1002/eem2.12450 ↗
2. Na-ion batteries for large scale applications: A review on anode materials and solid electrolyte interphase formation10.1002/aenm.201700463 ↗
3. Recent progress and prospects on sodium-ion battery and all-solid-state sodium battery: A promising choice of future batteries for energy storage10.1021/acs.energyfuels.4c00980 ↗
4. Sodium ion batteries: A newer electrochemical storage10.1002/wene.136 ↗
5. Sodium metal anodes: Emerging solutions to dendrite growth10.1021/acs.chemrev.8b00642 ↗
6. Design strategies to enable the efficient use of sodium metal anodes in high-energy batteries
7. Engineering solid electrolyte interface at nano-scale for high-performance hard carbon in sodium-ion batteries10.1002/adfm.202100278 ↗
8. Electrolytes, SEI formation, and binders: A review of nonelectrode factors for sodium-ion battery anodes10.1002/smll.201703576 ↗
9. Functional electrolyte additives for sodium-ion and sodium-metal batteries: Progress and perspectives
10. Review on modeling of the anode solid electrolyte interphase (SEI) for lithium-ion batteries10.1038/s41524-018-0064-0 ↗
11. Atomic-scale design of anode materials for alkali metal (Li/Na/K)-ion batteries: Progress and perspectives10.1002/aenm.202200662 ↗
12. Electrolyte solvation structure design for sodium ion batteries10.1002/advs.202201207 ↗
13. Progress in electrolyte and interface of hard carbon and graphite anode for sodium-ion battery10.1002/cey2.120 ↗
14. Fluoride-rich solid-electrolyte-interface enabling stable sodium metal batteries in high-safe electrolytes
15. Electrolytes and interphases in sodium-based rechargeable batteries: recent advances and perspectives10.1002/aenm.202000093 ↗
16. Comprehensive characterization of propylene carbonate based liquid electrolyte mixtures for sodium-ion cells10.1016/j.electacta.2021.139670 ↗
17. Electrolyte salts for sodium-ion batteries: napf6 or naclo410.1021/acsnano.3c07474 ↗
18. Greener, safer, and sustainable batteries: an insight into aqueous electrolytes for sodium-ion batteries
19. Highly safe ionic liquid electrolytes for sodium-ion battery: wide electrochemical window and good thermal stability10.1021/acsami.6b07054 ↗
20. Comprehensive insights into the reactivity of electrolytes based on sodium ions10.1002/cssc.201501605 ↗
21. SEI composition on hard carbon in Na-Ion batteries after long cycling: influence of salts (NaPF6, NaTFSI) and additives (FEC, DMCF)10.1149/1945-7111/ab75fd ↗
22. Effects of charged interfaces on electrolyte decomposition at the lithium metal anode10.1016/j.jpowsour.2020.228449 ↗
23. The crucial role of local excess charges in dendrite growth on lithium electrodes10.1002/anie.202017124 ↗
24. Efficiency of ab-initio total energy calculations for metals and semiconductors using a plane-wave basis set10.1016/0927-0256(96)00008-0 ↗
25. Efficient iterative schemes for Ab initio total-energy calculations using a plane-wave basis set10.1103/PhysRevB.54.11169 ↗
26. Projector augmented-wave method10.1103/PhysRevB.50.17953 ↗
27. From ultrasoft pseudopotentials to the projector augmented-wave method10.1103/PhysRevB.59.1758 ↗
28. Generalized gradient approximation made simple10.1103/PhysRevLett.77.3865 ↗
29. Ethanol and water adsorption on close-packed 3d, 4d, and 5d transition-metal surfaces: a density functional theory investigation with van der Waals correction10.1021/jp308870d ↗
30. Modeling adsorption and reactions of organic molecules at metal surfaces10.1021/ar500118y ↗
31. A consistent and accurate ab initio parametrization of density functional dispersion correction (DFT-D) for the 94 elements Image 120710.1063/1.3382344 ↗
32. The influence of hydroxy groups on the adsorption of three-carbon alcohols on Ni(111), Pd(111) and Pt(111) surfaces: a density functional theory study within the D3 dispersion correction10.1039/C9CP00752K ↗
33. Theoretical and experimental insights into transition metal single-atom adsorption effects on perovskite surfaces10.1021/acs.jpcc.5c04429 ↗
34. Sodium metal anodes: deposition and dissolution behaviour and SEI formation10.1016/j.electacta.2020.136698 ↗
35. Combining theories and experiments to understand the sodium nucleation behavior towards safe sodium metal batteries10.1039/D0CS00033G ↗
36. Converged properties of clean metal surfaces by all-electron first-principles calculations10.1016/j.susc.2005.12.008 ↗
37. In situ healing of dendrites in a potassium metal battery10.1073/pnas.1915470117 ↗
38. Orientation dependence of the work function for metal nanocrystals10.1063/1.4991725 ↗
39. Research progress of organic liquid electrolyte for sodium ion battery10.3389/fchem.2023.1253959 ↗
40. Unveiling reaction pathways of ethylene carbonate and vinylene carbonate in Li-Ion batteries10.1021/acs.jpcc.4c00927 ↗
41. Electrolyte salts for large-scale application of sodium-ion batteries: NaPF6 and emerging alternatives10.1016/j.jpowsour.2025.237519 ↗
42. Mechanisms and mitigation strategies of gas generation in sodium-ion batteries10.1007/s40820-025-01697-1 ↗
43. Investigation of the solid electrolyte interphase on hard carbon electrode for sodium ion batteries10.1016/j.jelechem.2017.06.002 ↗
44. Revisit electrolyte chemistry of hard carbon in ether for Na storage10.1021/jacsau.1c00158 ↗
45. A non-aqueous sodium hexafluorophosphate-based electrolyte degradation study: formation and mitigation of hydrofluoric acid10.1016/j.jpowsour.2019.227363 ↗
46. A highly reversible room-temperature sodium metal anode10.1021/acscentsci.5b00328 ↗
47. New route to battery grade NaPF6 for Na-Ion batteries: expanding the accessible concentration10.1002/anie.202111215 ↗
48. Electrode/electrolyte interphases of sodium-ion batteries10.3390/en15228615 ↗
49. Structure, composition, transport properties, and electrochemical performance of the electrode-electrolyte interphase in non-aqueous Na-Ion batteries10.1002/admi.202101773 ↗
50. Understanding the electrochemical compatibility and reaction mechanism on Na metal and hard carbon anodes of pc-based electrolytes for sodium-ion batteries10.1021/acsami.8b13236 ↗
51. Decomposition reactions of anode solid electrolyte interphase (SEI) components with LiPF610.1021/acs.jpcc.7b08433 ↗
52. Recent advances for SEI of hard carbon anode in sodium-ion batteries: a mini review10.3389/fchem.2022.986541 ↗
53. Electrolyte engineering of hard carbon for sodium-ion batteries: from mechanism analysis to design strategies
54. Structure and ionic conductivity of the solid electrolyte interphase layer on tin anodes in Na-ion batteries10.1016/j.jpowsour.2016.11.077 ↗
55. In search of an optimized electrolyte for Na-ion batteries10.1039/c2ee22258b ↗
56. Dockonsurf: a python code for the high-throughput screening of flexible molecules adsorbed on surfaces10.1021/acs.jcim.1c00256 ↗
57. Data clustering: 50 years beyond K-means10.1016/j.patrec.2009.09.011 ↗
58. Van der Waals density functional theory study for bulk solids with BCC, FCC, and diamond structures10.1016/j.cap.2015.03.028 ↗
59. Kittel · 2018 · 720
60. Microscopic properties of Na and Li: a first principle study of metal battery anode materials10.1002/cssc.201902860 ↗
61. Surface energy and work function of Fcc and Bcc crystals: density functional study10.1016/j.susc.2014.08.017 ↗
62. Effective coordination numbers (ECoN) and mean fictive ionic radii (MEFIR)10.1524/zkri.1979.150.14.23 ↗
63. Introducing DDEC6 atomic population analysis: part 1. charge partitioning theory and methodology10.1039/C6RA04656H ↗
64. Lithium dendrite in all-solid-state batteries: growth mechanisms, suppression strategies, and characterizations10.1016/j.matt.2020.03.015 ↗
65. Theory of metal surfaces: work function10.1103/PhysRevB.3.1215 ↗
66. Understanding coordination reaction for producing stable electrode with various low work functions10.1038/s41467-020-17548-z ↗
67. Influence of surface roughness on the work function of gold: a density functional theory study10.1021/acs.jpcc.4c01068 ↗
68. Physical and inorganic chemistry10.1021/ja00905a001 ↗
69. Advanced solid electrolyte interphase engineering for stable sodium metal anodes10.1002/aenm.202501498 ↗
70. Impact of NaH on the electrochemical performance of sodium batteries10.1021/acsomega.4c08310 ↗
71. Sodiophilic substrate induces NaF-Rich solid electrolyte interface for dendrite-free sodium metal anode
72. Impact of the salts and solvents on the SEI formation in Sb/Na batteries: an XPS analysis10.1016/j.electacta.2016.03.089 ↗
73. Electrolyte decomposition on Li-metal surfaces from first-principles theory10.1063/1.4967810 ↗
74. Ab initio molecular dynamics simulations of the initial stages of solid–electrolyte interphase formation on lithium ion battery graphitic anodes10.1039/b925853a ↗
75. Lithium chloride protective layer for stable lithium metal anode via a facile surface chemistry10.1016/j.jelechem.2022.117063 ↗
76. LiCl surface engineering for stable and kinetically enhanced hard carbon anodes in lithium-ion batteries10.1016/j.jpowsour.2026.240154 ↗
77. Lithium salts for advanced lithium batteries: Li–metal, Li–O2, and Li–S10.1039/C5EE01215E ↗
78. Detecting trends using Spearman’s Rank correlation coefficient10.1006/enfo.2001.0061 ↗
79. In-depth understanding of interfacial na+ behaviors in sodium metal anode: migration, desolvation, and deposition10.1002/adma.202405310 ↗
80. An in-depth study of the solid electrolyte interphase compositional evolution in sodium-ion batteries: unravelling the effects of a Na metal counter electrode on the SEI10.1002/advs.202504717 ↗
81. Impact of the electrolyte salt anion on the solid electrolyte interphase formation in sodium ion batteries10.1016/j.nanoen.2018.10.040 ↗
82. Stability of solid electrolyte interphase components on lithium metal and reactive anode material surfaces10.1021/acs.jpcc.5b11719 ↗