Air stable La2O3-Al2O3 composite films grown by atomic layer deposition for plasma etch resistance
Source abstract
Abstract
Rare-earth ceramics are promising plasma etch-resistant coatings because they form stable fluorides. However, the industry-benchmark Y2O3 is limited by high cost and supply-chain risks. Although La2O3 is a more abundant and cost-effective alternative, its application is restricted by strong hygroscopicity. Upon exposure to air, La2O3 readily reacts with H2O and CO2 to form hydroxide and carbonate species, causing volume expansion and reducing density and structural stability. This paper describes the design and realization of atomic layer deposition (ALD)-grown La2O3-Al2O3 composite ceramic films that achieve etch resistance approaching that of Y2O3 while significantly outperforming Al2O3, together with improved environmental stability. Compared with Al2O3, the enhanced etch resistance of the composite films is associated with preferential removal of Al-containing fluorides, which promotes near-surface La enrichment and the formation of a dense La-rich protective layer that suppresses further erosion. Meanwhile, the incorporation of Al2O3 improves the environmental stability of the films by lowering surface basicity, thereby suppressing adsorption of ambient H2O and CO2. Under CF4/O2/Ar plasma, the composite film with 28 at.% La reduces the etch rate of Al2O3 by over 75% to 0.51 nm/min, approaching pure La2O3 (0.33 nm/min), which outperforms the industrial-benchmark Y2O3 (0.53 nm/min).
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Semiconductor materials and devices · Plasma Diagnostics and Applications · Copper Interconnects and Reliability
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (80)
Show source-provided references
1. Plasma etching behavior of Y2O3 ceramics: Comparative study with Al2O310.1016/j.apsusc.2016.01.092 ↗
2. Plasma etching properties of various transparent ceramics10.1016/j.ceramint.2019.09.283 ↗
3. Contributions of CF and CF2 Species to Fluorocarbon Film Composition and Properties for CxFy Plasma-Enhanced Chemical Vapor Deposition10.1021/am2018546 ↗
4. Surface Phenomena during Plasma-Assisted Atomic Layer Etching of SiO210.1021/acsami.7b08234 ↗
5. Effect of Free Radicals on Irradiation Chemistry of a Double-Coordination Organotin (Sn4) Photoresist by Adjusting Alkyl Ligands10.31635/ccschem.023.202303616 ↗
6. Role of Oxygen in Amorphous Carbon Hard Mask Plasma Etching10.1021/acsomega.3c02438 ↗
7. Decoupled etch selectivity and optical transparency in controlled deposition of diamond-like carbon films via a reverse antenna PECVD for hard masks10.1007/s11426-025-2746-y ↗
8. Balancing sensitivity and resolution by feedback regulation of free radicals from Sn-C bonds in tin-oxygen clusters EBL photoresist10.1007/s40843-024-3062-y ↗
9. Investigation of contamination particles generation and surface chemical reactions on Al2O3, Y2O3, and YF3 coatings in F-based plasma10.1016/j.apsusc.2023.157367 ↗
10. Surface Analysis of Chamber Coating Materials Exposed to CF4/O2 Plasma10.3390/coatings11010105 ↗
11. Correlation with the Microstructure and Synergistic Physiochemical Etching Resistance of Nanocomposites under Fluorine-Containing Plasma Conditions10.1021/acsami.2c12311 ↗
12. Thermal and Plasma-Enhanced Atomic Layer Deposition of Yttrium Oxide Films and the Properties of Water Wettability10.1021/acsami.9b18412 ↗
13. Erosion behavior of Y2O3 in fluorine‐based etching plasmas: Orientation dependency and reaction layer formation10.1111/jace.17556 ↗
14. Preparation and Properties of Plasma Etching-Resistant Y2O3 Films10.3390/coatings15121397 ↗
15. Yttrium Oxyfluoride Coatings Deposited by Suspension Plasma Spraying using Coaxial Feeding10.3390/coatings10050481 ↗
16. Porosity and its significance in Plasma-Sprayed Coatings10.3390/coatings9070460 ↗
17. Surface functionalization on nanoparticles via atomic layer deposition10.1016/j.scib.2020.01.016 ↗
18. Protein-activated atomic layer deposition for robust crude-oil-repellent hierarchical nano-armored membranes10.1016/j.scib.2023.12.001 ↗
19. Development of solid-state nanopore fabrication technologies10.1007/s11434-014-0705-8 ↗
20. Review of recent progresses on flexible oxide semiconductor thin film transistors based on atomic layer deposition processes10.1088/1674-4926/39/1/011008 ↗
21. Atomic Layer Deposition: an Overview10.1021/cr900056b ↗
22. Enhanced plasma resistance of uniform ALD-Y2O3 thin films for chamber components’ coatings10.1116/6.0004256 ↗
23. Deposition of uniform films on complex 3D objects by atomic layer deposition for plasma etch-resistant coatings10.1093/nsr/nwaf247 ↗
24. L. Leppilahti, Plasma corrosion resistant ALD coatings for semiconductor manufacturing process equipment, in: 2023 34th Annual SEMI Advanced Semiconductor Manufacturing Conference (ASMC), IEEE, Saratoga Springs, NY, USA, 2023, pp. 1–5. Doi: 10.1109/ASMC57536.2023.10121076.10.1109/ASMC57536.2023.10121076 ↗
25. An economics strategy for criticality – Application to rare earth element yttrium in new lighting technology and its sustainable availability10.1016/j.rser.2016.12.127 ↗
26. U.S. Geological Survey, Mineral Commodity Summaries 2026, Version 1.2, U.S. Geological Survey, Reston, VA, 2026. Doi: 10.3133/mcs2026.10.3133/mcs2026 ↗
27. Behind of the criticality for rare earth elements: surplus of China’s yttrium10.1016/j.resourpol.2022.102624 ↗
28. Fabrication, Microstructure and Plasma Resistance Behavior of Y–Al–Si–O (YAS) Glass-Ceramics Coated on Alumina Ceramics10.3390/ma17184585 ↗
29. Correlative characterization of plasma etching resistance of various aluminum garnets10.1111/jace.19951 ↗
30. Erbium aluminum perovskite ceramics with superior plasma etching resistance10.1111/jace.20501 ↗
31. Rare Earths and the Balance Problem: how to Deal with changing Markets?10.1007/s40831-018-0162-8 ↗
32. A review of rare-earth oxide films as high k dielectrics in MOS devices — Commemorating the 100th anniversary of the birth of Academician Guangxian Xu10.1016/j.jre.2020.10.013 ↗
33. Stability and morphology of cerium oxide surfaces in an oxidizing environment: a first-principles investigation10.1063/1.3191784 ↗
34. CeO2 Surface Oxygen vacancy Concentration Governs in Situ Free Radical Scavenging Efficacy in Polymer Electrolytes10.1021/am3016069 ↗
35. Ce3+ and oxygen vacancy mediated tuning of structural and optical properties of CeO2 nanoparticles10.1016/j.matchemphys.2011.10.032 ↗
36. Fracture behavior characteristic of ceramic reinforced metal-base coatings10.1007/s12209-009-0010-9 ↗
37. Tribology performance and adhesive strength evaluation of TiAlSiN coating10.1007/s12209-011-1601-9 ↗
38. A critical review of lanthanum and lanthanum-based materials: synthesis, applications, and challenges10.1007/s12598-024-03204-8 ↗
39. Effect of lanthanum content on physicochemical properties and thermal evolution of spent and beneficiated spent FCC catalysts10.1016/j.ceramint.2022.03.039 ↗
40. Towards the Circular Economy of Rare Earth elements: Lanthanum Leaching from Spent FCC Catalyst by Acids10.3390/pr9081369 ↗
41. ALD La-based Oxides for Vt-Tuning in High-K/Metal Gate Stacks10.1149/1.2779084 ↗
42. Electrical properties of La2O3 thin films grown on TiN/Si substrates via atomic layer deposition10.1016/j.apsusc.2005.11.064 ↗
43. Impact of La2O3 interfacial layers on InGaAs metal-oxide-semiconductor interface properties in Al2O3/La2O3/InGaAs gate stacks deposited by atomic-layer-deposition10.1063/1.4929650 ↗
44. Improving the Electrical Properties of Lanthanum Silicate Films on Ge Metal Oxide Semiconductor Capacitors by adopting Interfacial Barrier and Capping Layers10.1021/am5012172 ↗
45. Atomic Layer Deposition of La2O3 Film with Precursor La(thd)3-DMEA10.3390/coatings13050870 ↗
46. Surface chemistry of atomic layer deposition: a case study for the trimethylaluminum/water process10.1063/1.1940727 ↗
47. X-ray Photoelectron Spectroscopy Depth Profiling of La2O3 /Si Thin Films Deposited by Reactive Magnetron Sputtering10.1021/am201021m ↗
48. Lanthanum Aluminum Oxide Thin-Film Dielectrics from Aqueous solution10.1021/am507271e ↗
49. Chemical and structural properties of atomic layer deposited La2O3 films capped with a thin Al2O3 layer10.1116/1.3079632 ↗
50. Moisture-absorption-induced permittivity deterioration and surface roughness enhancement of lanthanum oxide films on silicon10.1063/1.2174840 ↗
51. Enhancing the Stability of Passive Film on 304 SS by Chemical Modification in Alkaline Phosphate–Molybdate Solutions10.1007/s12209-020-00238-8 ↗
52. Influence of growth temperature on dielectric strength of Al2O3 thin films prepared via atomic layer deposition at low temperature10.1038/s41598-022-09054-7 ↗
53. Impurity and silicate formation dependence on O3 pulse time and the growth temperature in atomic-layer-deposited La2O3 thin films10.1063/1.4975083 ↗
54. Growth of ZnO/Al2O3 Alloy Films using Atomic Layer Deposition Techniques10.1021/cm020607+ ↗
55. Influence of surface preparation on atomic layer deposition of Pt films10.1088/1674-4926/33/8/083003 ↗
56. XPS characterisation of in situ treated lanthanum oxide and hydroxide using tailored charge referencing and peak fitting procedures10.1016/j.elspec.2011.04.002 ↗
57. Understanding lanthanum oxide surface structure by DFT simulation of oxygen 1s calibrated binding energy in XPS after in situ treatment10.1016/j.apsusc.2021.149214 ↗
58. XPS analysis and microstructural characterization of a Ce/Tb mixed oxide supported on a lanthana-modified transition alumina10.1002/(SICI)1096-9918(199910)27:10<941::AID-SIA657>3.0.CO;2-Y ↗
59. Understanding of binding energy calibration in XPS of lanthanum oxide by in situ treatment10.1039/C9CP04187G ↗
60. Päiväsaari · 2006
61. Processing map to control the erosion of Y2 O3 in fluorine based etching plasmas10.1111/jace.18334 ↗
62. London Metal Exchange, LME Alumina (Platts). https://www.lme.com/metals/non-ferrous/lme-alumina_, 2026 (accessed 11 May 2026).
63. Dense Al2O3 sealing inhibited high hydrostatic pressure corrosion of Cr/GLC coating, npj Mater
64. Effect of HF pressure on thermal Al2 O3 Atomic Layer Etch rates and Al2O3 Fluorination10.1021/acs.jpcc.9b00124 ↗
65. New chamber walls conditioning and cleaning strategies to improve the stability of plasma processes10.1088/0963-0252/14/3/025 ↗
66. Development of new anode composite materials for fluoride ion batteries10.1039/C4TA02840F ↗
67. Nanocrystalline Lanthanum Oxyfluoride Thin Films by XPS10.1116/11.20050401 ↗
68. CVD of Lanthanum Oxyfluoride-based Thin Films from a Lanthanum β-Diketonate Diglyme Precursor10.1002/cvde.200506412 ↗
69. Fluorination mechanisms of Al2O3 and Y2O3 surfaces irradiated by high-density CF4/O2 and SF6/O2 plasmas10.1116/1.3112624 ↗
70. K. Miwa, T. Sawai, M. Aoyama, F. Inoue, A. Oikawa, K. Imaoka, Particle reduction using Y2O3 material in an etching tool, in: 2007 International Symposium on Semiconductor Manufacturing, IEEE, Santa Clara, CA, USA, 2007, pp. 1–4. Doi: 10.1109/ISSM.2007.4446866.10.1109/ISSM.2007.4446866 ↗
71. Relative sputtering rates of oxides and fluorides of aluminum and yttrium10.1016/j.surfcoat.2016.11.007 ↗
72. P. Sigmund, Theory of Sputtering. I. Sputtering Yield of Amorphous and Polycrystalline Targets, Phys. Rev. 184 (1969) 383–416. Doi: 10.1103/PhysRev.184.383.10.1103/PhysRev.184.383 ↗
73. Vapor pressure, heat of sublimation, and evaporation coefficient of lanthanum fluoride10.1021/j100863a017 ↗
74. Torsion Vapor pressures and Sublimation Enthalpies of Aluminum Trifluoride and Aluminum Trichloride10.1021/je8007167 ↗
75. Room temperature inductively coupled plasma etching of InAs/InSb in BCl3/Cl2/Ar10.1016/j.mee.2012.07.018 ↗
76. Self assembled micro masking effect in the fabrication of SiC nanopillars by ICP-RIE dry etching10.1016/j.apsusc.2010.11.053 ↗
77. Surface roughness generated by plasma etching processes of silicon10.1116/1.2932091 ↗
78. Spectroscopic ellipsometry and x-ray photoelectron spectroscopy of La2O3 thin films deposited by reactive magnetron sputtering10.1116/1.3539069 ↗
79. An In Situ Temperature-Dependent Study of La2O3 Reactivation Process10.3389/fchem.2021.694559 ↗
80. Design of Higher-k and More Stable Rare Earth Oxides as Gate Dielectrics for Advanced CMOS Devices10.3390/ma5081413 ↗