journal article·2026-10

Recondensation-induced target modification and compositional gradients in LiMn2O4 films

Xiaochun Huang, Natacha Ohannessian, Thomas Lippert, Christof W. Schneider

Publisher page

Abstract

Achieving stoichiometric transfer from multi-elemental targets is a critical challenge in pulsed laser deposition (PLD) in particular if mass-ratios of target elements are large like in lithium-containing complex oxides. This study identifies the often overlooked recondensation effect as the origin of through-thickness compositional gradients in LiMn2O4 films deposited under elevated oxygen pressures. Using secondary ion mass spectrometry (SIMS) depth profiling, we show that films grown at low oxygen pressures (≤0.01 mbar) are chemically homogeneous, whereas higher pressures (≥0.05 mbar) lead to a continuous lithium depletion as deposition proceeds. A combination of plasma mass spectrometry and SIMS analysis of the target surface reveals that this compositional inhomogeneity at higher pressures stems from the accumulation of a lithium-deficient recondensed layer at the ablation crater and surrounding areas, which is subsequently ablated as the ablation spot moves. Element-resolved plume imaging reveals that at PLD-relevant high-pressure conditions, light elements (Li and O) rapidly escape into the background gas, while heavier Mn species remain confined near the target, promoting a preferential recondensation of Mn. These results highlight the recondensation-induced target modification as a critical, pressure-dependent parameter in PLD and provide key insights into the stoichiometric growth of complex multi-element oxide thin films.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Battery Materials · Photorefractive and Nonlinear Optics · Advanced Battery Materials and Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (55)

Show source-provided references
1. A practical guide to pulsed laser deposition10.1039/D2CS00938B ↗
2. Influence of plume properties on thin film composition in pulsed laser deposition10.1002/admi.201701062 ↗
3. Physical aspects of the pulsed laser deposition technique: the stoichiometric transfer of material from target to film10.1016/j.apsusc.2008.10.101 ↗
4. The importance of pressure and mass ratios when depositing multi-element oxide thin films by pulsed laser deposition10.1016/j.apsusc.2016.07.003 ↗
5. The influence of lithium excess in the target on the properties andcompositions of Li1+xMn2O4−δ thin films prepared by PLD10.1007/s00339-008-4701-1 ↗
6. Microstructure and ionic conductivity of LLTO thin films: Influence of different substrates and excess lithium in the target10.1016/j.ssi.2014.12.005 ↗
7. Growth processes of lithium titanate thin films deposited by using pulsed laser deposition10.1063/1.4752466 ↗
8. Relative effects of pulsed laser deposition parameters on the stoichiometry of thin films10.1016/j.tsf.2022.139603 ↗
9. Guidelines and trends for next-generation rechargeable lithium and lithium-ion batteries10.1039/C7CS00863E ↗
10. Surface Mn oxidation state controlled spinel LiMn2O4 as a cathode material for high‐energy Li‐Ion batteries10.1002/aenm.201500440 ↗
11. Earth-abundant spinel LiMn2O4 cathode for lithium-ion batteries: challenges, strategies, and perspectives10.1002/smtd.202402233 ↗
12. Effect of film thickness on the kinetics of lithium insertion in LiMn2O4 films made by multilayer pulsed laser deposition for thin‐film all‐solid‐state battery cathode materials**10.1002/celc.202200759 ↗
13. Manganese-based spinel cathodes: a promising frontier for solid-state lithium-ion batteries10.1002/adma.202514126 ↗
14. Pulsed laser deposition as a tool for the development of all solid‐state microbatteries10.1002/hlca.202000203 ↗
15. Plasma plume dynamics, rebound, and recoating of the ablation target in pulsed laser deposition10.1063/1.4979780 ↗
16. Pressure and temperature dependence of the laser-induced plasma plume dynamics10.1063/1.4971251 ↗
17. Mechanisms of the laser plume expansion during the ablation of LiMn2O410.1063/1.3095687 ↗
18. PLD plasma plume analysis: a summary of the PSI contribution10.1007/s00339-023-06408-4 ↗
19. Lithium loss in vacuum deposited thin films10.1021/acsenergylett.4c00153 ↗
20. Effects of atomic collisions on the stoichiometry of thin films prepared by pulsed laser deposition10.1103/PhysRevLett.111.036101 ↗
21. Influence of an O2 background gas on the composition and kinetic energies of species in laser induced La0.4Ca0.6MnO3 plasmas10.1016/j.apsusc.2012.12.090 ↗
22. Dynamics of laser ablation plume penetration through low pressure background gases10.1063/1.114665 ↗
23. Dynamics of plume propagation and splitting during pulsed-laser ablation10.1103/PhysRevLett.79.1571 ↗
24. Laser ablation plume thermalization dynamics in background gases: combined imaging, optical absorption and emission spectroscopy, and ion probe measurements10.1016/0169-4332(95)00421-1 ↗
25. Laser-produced plasma ion characteristics in laser ablation of lithium manganate10.1016/j.apsusc.2007.08.002 ↗
26. Gas-phase oxidation chemistry during pulsed laser deposition of YBa2Cu3O7−δ films10.1063/1.353939 ↗
27. Optimizing an ultra-high vacuum system for growth-to-thin films studies by mass spectrometry, in
28. Influence of atomic collisions in vapour phase on pulsed laser ablation10.1016/S0169-4332(00)00603-6 ↗
29. On the direct observation of the gas-dynamics of laser-pulse sputtering of polymers10.1007/BF00330232 ↗
30. Thermal model of pulsed laser ablation: back flux contribution10.1007/s00339-004-2613-2 ↗
31. Surface structuring and reverse deposition of nanoporous titanium oxides by laser ablation of titanium in air10.1007/s11090-022-10256-0 ↗
32. The structure and composition of lithium fluoride films grown by off-axis pulsed laser ablation10.1016/S0169-4332(03)00583-X ↗
33. Equilibrium model of titanium laser induced plasma in air with reverse deposition of titanium oxides10.1016/j.sab.2022.106449 ↗
34. Oxidation process in pulsed laser ablation of Si with various ambients10.1016/S0040-6090(02)00540-0 ↗
35. Thin film growth by inverse pulsed laser deposition10.1016/j.tsf.2005.02.008 ↗
36. Material transport during excimer-laser nitriding of iron10.1063/1.367116 ↗
37. Laser–plume dynamics during excimer laser nitriding of iron10.1063/1.1563814 ↗
38. On the dual role of the Knudsen layer and unsteady, adiabatic expansion in pulse sputtering phenomena10.1063/1.458540 ↗
39. Laser-pulse sputtering of atoms and molecules part II. Recondensation effects10.1016/0168-583X(94)96310-X ↗
40. Studies of the plume accompanying pulsed ultraviolet laser ablation of zinc oxide10.1063/1.1518782 ↗
41. Microstructural study of the Y-Ba-Cu-O system at high temperatures10.1143/JJAP.28.L399 ↗
42. Pulsed laser ablation of complex oxides: the role of congruent ablation and preferential scattering for the film stoichiometry10.1063/1.4754112 ↗
43. Mechanism of incongruent ablation of SrTiO310.1063/1.367106 ↗
44. A novel PLD configuration for deposition of films of improved quality: a case study of carbon nitride10.1007/s00339-004-2719-6 ↗
45. Epitaxial LiCoO2 films as a model system for fundamental electrochemical studies of positive electrodes10.1021/am508512q ↗
46. Halide superionic conductors for all-solid-state batteries: effects of synthesis and composition on lithium-ion conductivity10.1021/acsenergylett.4c00317 ↗
47. Impact of lithium concentration on the mechanical properties of Li6PS5Cl solid electrolyte for all-solid-state lithium batteries10.1021/acsaenm.5c00184 ↗
48. Van der Heide · 2014
49. Ion expansion dynamics of laser induced multi-elemental plasmas10.1088/1361-6463/acd3ff ↗
50. A dynamic double layer as the origin of the mass-dependent ion acceleration in laser-induced plasmas
51. J.A. Dean, Lange's handbook of chemistry, 1999.
52. Time-resolved reflectivity and temperature measurements during laser irradiation of crystalline silicon
53. Vibrational cooling (and heating) of large molecules in solids10.1016/0022-2313(90)90204-O ↗
54. Correlation of structural and magnetic properties of RFeO3 (R=Dy, Lu)
55. B. Biswas, Strain-Induced Magneto-Electric Properties of Epitaxial (010) o-DyFeO3 Thin Films, in: Laboratory of Anorganic Chemistry, ETH Zurich, ETH Zurich, Zurich, 2021.