Structure and composition of arc-PVD coatings deposited in Ar and N2 residual atmospheres via Zr/(ZrB2-SiC) combined cathode evaporation
Source abstract
Abstract
Deposition of coatings based on the Zr-B-Si-C system was carried out by vacuum arc evaporation using combined cathodes, which consist of a sintered ZrB₂–SiC ceramic insert embedded in a bulk zirconium cathode. The coatings have an amorphous structure with pronounced structural heterogeneity, manifesting as layers ranging from 1 to 15 nm in size. These layers have varying contents of the elements present in the cathode and are separated by boundaries. The observed multi-layered nature of the structure is related to the architectural design of the combined cathodes used and their evaporation within the cathode spots of the vacuum electric arc. The constant movement of cathode spots across the cathode surface, facilitated by a system of magnetic coils, results in a stochastic probability of evaporation for its different components from various areas. Consequently, the generated plasma flux, enriched with various components, interacts with the substrate to form the structural and phase heterogeneity of the coating. By determining the binding energies of photoelectrons C1s, N1s, Zr3d + B1s, Si2p, the composition of the formed coatings and the influence of the energy of the sputtered ions on it were established.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal and Thin Film Mechanics · Diamond and Carbon-based Materials Research · High-Temperature Coating Behaviors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (52)
Show source-provided references
1. Recent progress and future directions in nanoglass materials: a deep insight into synthesis, characterization, and application
2. Bulk metallic glass: the smaller the better10.1002/adma.201002148 ↗
3. Enhancement of room-temperature plasticity in a bulk metallic glass by finely dispersed porosity10.1063/1.1953884 ↗
4. Designing metallic glass matrix composites with high toughness and tensile ductility10.1038/nature06598 ↗
5. Hard amorphous nanocomposite coatings with oxidation resistance above 1000 °C10.1179/174367508X306460 ↗
6. Microstructure evolution in amorphous Hf-B-Si-C-N high temperature resistant coatings after annealing to 1500 °C in air10.1038/s41598-019-40428-6 ↗
7. Tailoring nanostructured Ni-Nb metallic glassy thin films by substrate temperature10.1016/j.actamat.2020.04.046 ↗
8. Novel class of nanostructured metallic glass films with superior and tunable mechanical properties10.1016/j.actamat.2021.116955 ↗
9. Mechanical properties study of a magnetron-sputtered Zr-based thin film metallic glass10.1016/j.surfcoat.2012.04.101 ↗
10. The microstructure and mechanical properties of nitrogen and boron contained ZrCuAlNi thin film metallic glass composites10.1016/j.surfcoat.2013.09.015 ↗
11. The structural evolution of SiBCNZr amorphous ceramics analyzed by machine learning potential10.1016/j.ceramint.2024.05.296 ↗
12. ZrB2/SiC as a protective coating for C/SiC composites: effect of high temperature oxidation on mechanical properties and anti‑ablation property10.1016/j.compositesb.2012.07.007 ↗
13. Preparation and ablation properties of ZrB2–SiC protective laminae for carbon/carbon composites10.1016/j.ceramint.2014.06.010 ↗
14. ZrB2–SiC coating to protect carbon/carbon composites against ablation10.1016/j.surfcoat.2013.03.027 ↗
15. Development of ZrB2-SiC plasma-sprayed ceramic coating for thermo-chemical protection in hypersonic vehicles10.1007/s11665-023-08043-9 ↗
16. The effect of the SiC content on the high duration erosion behavior of SiC/ZrB2–SiC/ZrB2 functionally gradient coating produced by shielding shrouded plasma spray method10.1016/j.ceramint.2021.09.249 ↗
17. A critical analysis of the tensile adhesion test for thermally sprayed coatings10.1007/s11666-022-01468-z ↗
18. Resistance of PVD coatings to erosive and wear processes: a review10.3390/coatings10100921 ↗
19. Hard nanocrystalline Zr–B–C–N films with high electrical conductivity prepared by pulsed magnetron sputtering10.1016/j.surfcoat.2012.08.084 ↗
20. The fabrication and property evaluation of Zr–Ti–B–Si thin film metallic glass materials10.1016/j.surfcoat.2014.03.026 ↗
21. Structure and properties of Zr–Ti–B–C–N coatings obtained by pulsed magnetron sputtering10.1134/S2070205125700959 ↗
22. Structure and phase formation in arc PVD Zr–B–Si–C–Ti–(N) coatings10.1134/S0020168523020036 ↗
23. Uniting superhardness and damage-tolerance in a nanosandwich-structured Ti–B–N coating10.1016/j.scriptamat.2013.11.004 ↗
24. Bulk amorphous alloys
25. Crystalline or amorphous? A critical evaluation of phenomenological phase selection rules10.1016/j.matdes.2023.111994 ↗
26. W.-B. Han, P. Hu, X.-H. Zhang, J.-C. Han, S.-H. Meng, High‑temperature oxidation at 1900 °C of ZrB2–xSiC ultrahigh‑temperature ceramic composites, J. Am. Ceram. Soc. 91 (2008) 3328-3334. DOI: 10.1111/j.1551-2916.2008.02660.x.10.1111/j.1551-2916.2008.02660.x ↗
27. Mechanical properties of sintered ZrB2–SiC ceramics10.1016/j.jeurceramsoc.2010.11.013 ↗
28. Description and survey of methodologies for the determination of amorphous content via X‑ray powder diffraction10.1524/zkri.2011.1437 ↗
29. An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments10.1557/JMR.1992.1564 ↗
30. Silicon carbonitride thin films deposited by reactive high power impulse magnetron sputtering10.1016/j.surfcoat.2017.12.037 ↗
31. Hardness anomaly, plastic deformation work and fretting wear properties of polycrystalline TiN/CrN multilayers10.1016/S0043-1648(99)00272-0 ↗
32. H.S. Nalwa (Ed.), Handbook of Thin Film Materials. Vol.1: Deposition and Processing of Thin Films, Marcell Dekker Inc., N.Y., USA, 2002.
33. On the significance of the H/E ratio in wear control: a nanocomposite coating approach to optimized tribological behavior10.1016/S0043-1648(00)00488-9 ↗
34. Vacuum arc ion sources10.1063/1.1144756 ↗
35. Ion velocities in vacuum arc plasmas10.1063/1.1321789 ↗
36. A. Anders, Cathodic Arcs. From Fractal Spots to Energetic Condensation, Springer Science+Business Media, LLC, 2008. DOI: 10.1007/978-0-387-79108-1.10.1007/978-0-387-79108-1 ↗
37. Vacuum arc plasma generation and thin film deposition from a TiB2 cathode10.1063/1.4935152 ↗
38. NIST‑JANAF Thermochemical Tables, NIST Standard Reference Database. Available at: https://janaf.nist.gov/ (accessed 9 January 2025).
39. Williams · 2009
40. The retrograde motion of arc cathode spots in vacuum10.1088/0022-3727/33/16/315 ↗
41. Vacuum arc cathode spot theory: history and evolution of the mechanisms10.1109/TPS.2019.2904324 ↗
42. Radiation effects on gate induced drain leakage current in metal oxide semiconductor transistors10.1063/1.352065 ↗
43. XPS studies of the thermal behaviour of passivated zircaloy-4 surfaces10.1002/sia.740111003 ↗
44. Characterization of nitride coatings by XPS10.1016/S0257-8972(01)01619-X ↗
45. Very hard ZrC thin films grown by pulsed laser deposition10.1016/j.jeurceramsoc.2013.01.001 ↗
46. XPS studies of nitrogen ion implanted zirconium and titanium
47. The synthesis and characterization of CVD ZrB2 coating from ZrCl4–BCl3–H2–Ar system10.1016/j.ceramint.2017.10.145 ↗
48. Effects of chemical treatments on SiC surface composition and subsequent MoS2 film growth10.1021/la00093a017 ↗
49. Deposition of CrSiN/AlTiSiN nano‑multilayer coatings by multi‑arc ion plating using gas source silicon
50. Microstructure, oxidation resistance, mechanical and tribological properties of Mo–Al–N films by reactive magnetron sputtering10.1016/j.vacuum.2013.11.013 ↗
51. Effect of Mo content on the structure and mechanical properties of TiAlMoN films deposited on WC–Co cemented carbide substrate by magnetron sputtering10.1016/j.ijrmhm.2015.04.016 ↗
52. A comprehensive review of cathodic arc evaporation physical vapour deposition (CAE-PVD) coatings for enhanced tribological performance10.3390/coatings14030246 ↗