journal article·2026-10Open access

Laser micro-printing dynamics and scalability of solution-precursor silver films

Janko Tuta, Jaka Mur, Rok Petkovšek

Abstract

• Laser-induced silver reduction micro-printing processing scalability. • Silver micro-printing dynamics are studied for various laser operation regimes. • Photochemical and thermal laser printing regimes of silver are quantified. • Single spot and line deposition dynamics are presented from scalability standpoint. • Enables fast arbitrary pattern deposition of silver microstructures. Laser micro-printing by reduction of metal salts is an emerging direct laser writing technique, capable of producing precise conductive metallic structures with feature sizes smaller than a micrometer. Previous research focused on effects of chemical composition and additives, miniaturization of features and applications. This work explores variations in laser operating regimes towards micro-printing scalability. Single spot and line scanning deposition dynamics were analyzed by high-speed visible and infrared thermal imaging, comparing the effects of pulse energy, pulse repetition rate, incident pulse count and scanning speed on the dynamics and thermal effects of the silver deposit. The large variation of laser parameters was achieved by using a custom frequency doubled pulsed fiber-based laser, emitting 500 fs pulses in green 515 nm wavelength at up to 30 MHz repetition rate in pulse-on-demand operation regime. Pulse energy for silver deposition was in the range from 0.5 nJ to 6 nJ. Side-effects present during micro-printing, such as bubble formation and deposit ablation, were studied to omit imperfections, such as void formations in the deposit. Scanning speed provided an additional control parameter for line deposition, changing the dynamics and topography dramatically from low scanning speeds and high pulse energies to high speeds and a multi-pass scanning strategy. An optimal average linear density range of 10⁻ 3 –10⁻4 J/mm was determined. Understanding the effects of laser parameters and multi pass, high scanning speed strategy, turned out to be an enabler for homogeneous silver lines printed orders of magnitude faster than previously reported.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Laser Material Processing Techniques · Nonlinear Optical Materials Studies · Nanomaterials and Printing Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (63)

Show source-provided references
1. Laser printed microelectronics10.1038/s41467-023-36722-7 ↗
2. Excimer laser sintereing of silver nanoparticles electrodes for fully solution processed organic thin film transistors10.1016/j.optlastec.2019.105758 ↗
3. Scalable tactile sensor arrays on flexible substrates with high spatiotemporal resolution enabling slip and grip for closed-loop robotics10.1126/sciadv.abd7795 ↗
4. Microfluidic electrochemical glucose biosensor with in situ enzyme immobilization10.3390/bios13030364 ↗
5. A T-shape aluminum nitride thin-film piezoelectric MEMS resonant accelerometer10.1109/JMEMS.2019.2924956 ↗
6. Microheater-integrated microlens array for robust rapid fog removal10.1021/acsami.3c07262 ↗
7. Flexible nanowiring of metal on nonplanar substrates by femtosecond‐laser‐induced electroless plating10.1002/smll.201000511 ↗
8. Recently-explored top electrode materials for transparent organic solar cells10.1016/j.synthmet.2020.116582 ↗
9. A review on oxide/metal/oxide thin films on flexible substrates as electrodes for organic and perovskite solar cells
10. Mini-LED, Micro-LED and OLED displays: present status and future perspectives10.1038/s41377-020-0341-9 ↗
11. Ultra-thin silver oxide /silver transparent anodes for high-efficiency organic light-emitting devices10.1016/j.apsusc.2022.154421 ↗
12. Wirelessly controlled, bioresorbable drug delivery device with active valves that exploit electrochemically triggered crevice corrosion10.1126/sciadv.abb1093 ↗
13. Wireless bioresorbable electronic system enables sustained nonpharmacological neuroregenerative therapy10.1038/s41591-018-0196-2 ↗
14. Low voltage picoliter droplet manipulation utilizing electrowetting-on-dielectric platforms10.1016/j.snb.2012.07.022 ↗
15. Design and analysis of a multi-modal refractive index plasmonic biosensor based on split ring resonator for detection of the various cancer cells10.1007/s11082-024-07381-9 ↗
16. Selective electroless silver plating of three dimensional SU-8 microstructures on silicon for metamaterials applications10.1364/OME.1.001548 ↗
17. Split ring resonator-based multimode plasmonic optical biosensors for comprehensive antigen detection10.1007/s11220-024-00514-0 ↗
18. Contact photolithography at sub-micrometer scale using a soft photomask10.3390/mi10080547 ↗
19. High-resolution proximity lithography for nano-optical components10.1016/j.mee.2014.10.010 ↗
20. Projection optical lithography10.1016/S1369-7021(05)00698-X ↗
21. Next generation of extreme-resolution electron beam lithography10.1116/1.5119392 ↗
22. Two-photon polymerization lithography for optics and photonics: fundamentals, materials, technologies, and applications
23. Finer features for functional microdevices10.1038/35089130 ↗
24. M. Mur, A. Kavcic, U. Jagodic, R. Podlipec, M. Humar, Two-photon 3D printing of functional microstructures inside living cells, (2025). https://doi.org/10.48550/arXiv.2506.13232.10.1002/adma.202519286 ↗
25. Inkjet printing and 3D Printing strategies for biosensing, analytical, and diagnostic applications10.1002/adma.202105015 ↗
26. Laser-induced forward transfer: fundamentals and applications10.1002/admt.201800099 ↗
27. Evaluation and optimisation of the SSAIL method for laser-assisted selective electroless copper deposition on dielectrics10.1016/j.rinp.2020.102943 ↗
28. New process for selective additive metallization of alumina ceramic substrates10.1109/TCPMT.2018.2881410 ↗
29. Direct laser writing: from materials synthesis and conversion to electronic device processing10.1002/adma.202402014 ↗
30. Improvement in the reduction of silver ions in aqueous solution using two-photon sensitive dye10.1063/1.2345601 ↗
31. Multiphoton lithography of nanocrystalline platinum and palladium for site-specific catalysis in 3D microenvironments10.1021/ja211602t ↗
32. A review of classical and nonclassical nucleation theories10.1021/acs.cgd.6b00794 ↗
33. Silver nanoparticles: synthesis, characterization, properties, applications, and therapeutic approaches10.3390/ijms17091534 ↗
34. Citrate-reduced silver nanoparticles: synthesis temperature dependent properties10.1016/j.apsusc.2025.163759 ↗
35. From photoinduced electron transfer to 3D metal microstructures via direct laser writing10.1515/nanoph-2017-0134 ↗
36. The second laser revolution in chemistry: emerging laser technologies for precise fabrication of multifunctional nanomaterials and nanostructures10.1002/adfm.202405457 ↗
37. Fabrication of silver nanoparticles by highly intense laser irradiation of aqueous solution10.1007/s00339-011-6499-5 ↗
38. Direct laser writing from aqueous precursors for nano to microscale topographical control, integration, and synthesis of nanocrystalline mixed metal oxides10.1021/acsanm.9b00360 ↗
39. Photothermal laser printing of sub-micrometer crystalline ZnO structures10.1002/advs.202410771 ↗
40. Digital 3D local growth of iron oxide micro- and nanorods by laser-induced photothermal chemical liquid growth10.1021/jp501642j ↗
41. 3D metallic nanostructure fabrication by surfactant-assisted multiphoton-induced reduction10.1002/smll.200801179 ↗
42. Adhesion mechanisms of nanoparticle silver to substrate materials: identification
43. Fabrication of silver nanostructures using femtosecond laser-induced photoreduction10.1088/1361-6528/aa977b ↗
44. High-speed direct laser writing of silver nanostructures via two-photon reduction10.1002/adem.201900583 ↗
45. Femtosecond direct laser writing of gold nanostructures by ionic liquid assisted multiphoton photoreduction10.1364/OME.3.001660 ↗
46. Femtosecond laser multiple pulse-induced thermochemical copper precipitation from glyoxylic acid copper complex ink with surfactant10.1088/1361-6463/ada2fa ↗
47. Femtosecond CPA hybrid laser system with pulse-on-demand operation10.1364/OE.386769 ↗
48. Laser induced cavitation bubble and shockwave measurements with fiber optical hydrophone very close to origin10.1016/j.expthermflusci.2025.111655 ↗
49. High-speed photography of shock waves with an adaptive illumination10.1364/OL.388444 ↗
50. Atomistic view of laser fragmentation of gold nanoparticles in a liquid environment10.1021/acs.jpcc.1c03146 ↗
51. Bubble-pen lithography10.1021/acs.nanolett.5b04524 ↗
52. Bubble printing of layered silicates: surface chemistry effects and Picomolar Förster resonance energy transfer sensing10.1021/acsami.3c09760 ↗
53. Super-heating and micro-bubble generation around plasmonic nanoparticles under cw illumination10.1021/jp411519k ↗
54. Fabrication and placement of a ring structure of nanoparticles by a laser-induced micronanobubble on a gold surface10.1021/la201616s ↗
55. Femtosecond laser ablation of thin silver films in air and water under tight focusing10.1364/OME.406054 ↗
56. The conductive silver nanowires fabricated by two-beam laser direct writing on the flexible sheet10.1038/srep41757 ↗
57. Silver nanoparticle synthesis via photochemical reduction with sodium citrate10.3390/ijms24010255 ↗
58. What factors control the size and shape of silver nanoparticles in the citrate ion reduction method?10.1021/jp037018r ↗
59. UV irradiation induced formation of Au nanoparticles at room temperature: the case of pH values10.1016/j.colsurfa.2006.12.051 ↗
60. Visible-light-assisted silver ion reduction through silver diammine and citrate aggregation, and silver nanoparticle formation10.2320/matertrans.M2017405 ↗
61. Adsorption and surface-enhanced Raman of dyes on silver and gold sols10.1021/j100214a025 ↗
62. Thermo-plasmonics: using metallic nanostructures as nano-sources of heat10.1002/lpor.201200003 ↗
63. Laser-driven bubble printing of plasmonic nanoparticle assemblies onto nonplasmonic substrates10.1021/acs.jpcc.2c02414 ↗