Theoretical and experimental study on middle-spatial frequency errors control in high-speed reciprocating scanning laser polishing of fused silica
Source abstract
Abstract
The CO2 laser exhibited long-term power instability, and its beam possessed a Gaussian spatial energy distribution. These features resulted in non-uniform temporal and spatial distributions of the temperature field within the polishing area, which consequently generated scanning ripples on the surface of the polished fused silica, known as middle-spatial frequency errors. In this paper, theoretical analysis and experimental results were conducted to investigate the mechanism of the high-speed reciprocating scanning laser polishing process regulating the middle-spatial frequency errors of fused silica. Firstly, a numerical model was established that consisted of the heat transfer and fluid flow field of the polishing process, revealing the cause of the middle-spatial frequency errors generated by the typical low-speed scanning polishing process. Subsequently, the high-speed reciprocating scanning laser polishing process was investigated. By increasing the scanning width, it was able to effectively suppress the temperature gradient in the molten pool while maintaining a sufficiently long molten pool lifetime. Finally, two-dimensional numerical models, comprising the high-speed reciprocating scanning direction of laser beam and the slowly moving direction of sample being polished, were established to elucidate the physical mechanism of the high-speed reciprocating scanning laser polishing process that simultaneously suppressed both high-spatial frequency errors and middle-spatial frequency errors. Simulation analysis and experimental results indicated that when the high-speed reciprocating scanning speed exceeded 9 m/s, the temperature distribution along this direction was able to be equivalent to that achieved with a line laser beam. Under this condition, the temperature gradient across the central 80% span of the scanning length remained less than 50 K/mm. Within this temperature gradient range, the high-spatial frequency errors were able to be reduced from 0.4μm to 2nm, the middle-spatial frequency errors were able to be reduced from 3μm to 20nm.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Surface Polishing Techniques · Laser Material Processing Techniques · Optical Systems and Laser Technology
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (36)
Show source-provided references
1. Research progress in laser processing technology of glass materials
2. Additive manufacturing of quartz glass using coaxial wire feeding technology10.1016/j.optlastec.2024.111671 ↗
3. Research on laser etching and polishing process of quartz glass
4. Theoretical and experimental investigations of angular effects in pulsed CO2 laser ablation with fused silica10.1364/OE.559968 ↗
5. Formation mechanism and suppression method of surface deterioration in CO2 laser polishing for fused silica10.1016/j.optlastec.2025.113007 ↗
6. Investigation on control of middle and high-spatial frequency errors of fused silica optics melt polished by CO2 lasers
7. Thermodynamic and Kinetic simulation of CO2 Laser Irradiation on Fused Silica
8. Study on the mechanism and material removal process of CO2 laser polishing of fused silica
9. Mitigation of surface damage growth by hydrofluoric acid etching combined with carbon dioxide laser treatment10.1117/1.OE.51.8.084301 ↗
10. Two localized CO2 laser treatment methods for mitigation of UV damage growth in fused silica10.1088/1674-1056/21/6/064219 ↗
11. Ground fused silica processed by combined chemical etching and CO2 laser polishing with super-smooth surface and high damage resistance10.1364/OL.409857 ↗
12. Super-smooth surface demonstration and the physical mechanism of CO2 laser polishing of fused silica10.1364/OL.43.005777 ↗
13. High-precision ablation of fused silica by pulsed CO2 laser
14. Role of fictive temperature distribution involved in CO2 laser polishing of fused silica and its optimization for achieving even heat-affected zones10.1016/j.apsusc.2024.160605 ↗
15. Experimental and theoretical investigation of localized CO2 laser interaction with fused silica during the process of surface damage mitigation
16. Morphology evolution mechanisms and localized structural modification of repaired sites on fused silica optics processed by CO2 laser rapid ablation mitigation10.1016/j.optlastec.2021.107648 ↗
17. Combined studies of surface evolution and crack healing for the suppression of negative factors during CO2 laser repairing of fused silica10.3788/COL202119.041402 ↗
18. Formation mechanism of a smooth, defect-free surface of fused silica optics using rapid CO2 laser polishing
19. Toward little heat-affected area of fused silica materials using short pulse and high power CO2 laser10.1016/j.rinp.2019.01.033 ↗
20. Rapid CO2 laser processing technique for fabrication of micro-optics and micro-structures on fused silica materials10.1177/0954405420937534 ↗
21. Top-hat and Gaussian laser beam smoothing of ground fused silica surface10.1016/j.optlastec.2020.106141 ↗
22. Laser polishing and laser form correction of fused silica optics: laserpolieren und Laserformkorrektur von Quarzglasoptiken10.1002/mawe.201500319 ↗
23. Influence of intensity distribution and pulse duration on laser micro polishing10.1016/j.phpro.2011.03.057 ↗
24. Laser polishing and laser shape correction of optical glass10.2351/1.4974905 ↗
25. Analysis of molten pool dynamics and surface smoothing time scale in laser polishing alloy materials10.1016/j.optlastec.2023.109183 ↗
26. Dynamics of molten pool evolution and high-speed real-time optical measurement in laser polishing
27. ANSYS simulation of laser-irradiated fused silica control
28. Study on the mechanism of CO2 laser polishing of fused silica components and methods for suppressing residual stress
29. Research progress and development trends of laser polishing technology
30. New progress of CO2 laser processing techniques for fused silica optics10.3901/JME.2020.11.202 ↗
31. Process parameter optimization for CO2 laser polishing of fused silica using the Taguchi method10.3390/ma17030709 ↗
32. Influence of parameters on the surface roughness of the CO2 laser polished fused silica glass10.1016/j.ijleo.2021.168044 ↗
33. Micro‐shaping, polishing, and damage repair of fused silica surfaces using focused infrared laser beams10.1002/adem.201400349 ↗
34. Simulation and experimental study on CO2 laser polishing quartz glass
35. Surface topography and subsurface structure evolution in laser micro polishing of monocrystalline silicon10.1016/j.optlastec.2024.111068 ↗
36. Study on the evolution of full-bandwidth errors on fused silica components based on CO2 laser polishing process