Matrix-dependent UV laser reconstruction of 3D-Printed CNT-polymer composite interfaces governing electron-transfer accessibility
Source abstract
Abstract
Additively manufactured conductive polymer composites emerge in electroanalysis. These materials form chemically and structurally heterogeneous interfaces governing their electronic accessibility. Here, we demonstrate that pulsed UV laser reconstruction of CNT-filled 3D-printed composites produces matrix-dependent interfacial pathways. Using polylactic acid (PLA) and polyurethane (TPU) matrices as model systems, laser fluence was systematically varied and correlated with surface morphology, interfacial chemistry, carbon structural order, and electron-transfer kinetics. Although processing at various fluences increased the surface CNT contribution to comparable levels (~62% by XPS) for both matrices, the resulting electrochemical response diverged strongly. Phototermally-modified PLA becomes chemically heterogeneous and dominated by oxidized polymer fragments, while photo-oxidative matrix reconstruction in TPU forms an accessible interphase, enabling reproducible electron transfer and increased electrochemically active surface area.These findings reveal that electron-transfer accessibility is governed by matrix-specific degradation pathways and interfacial chemistry rather than by conductive filler exposure alone. UV laser processing thus provides a valid route to engineer interphases of different composites, offering a general strategy for tuning structure–property relationships in functional 3D-printed electrodes. As a functional demonstration, the optimized TPU interface enabled high-gain paracetamol and ciprofloxacin identification in aqueous media, with linear responses and sub-micromolar detection limits.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Laser Material Processing Techniques · Nonlinear Optical Materials Studies · Nanomaterials and Printing Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (65)
Show source-provided references
1. Influence of Electrode Roughness on Stripping Voltammetry: Mathematical Modeling and Numerical simulation10.1021/jp904187t ↗
2. Highly Sensitive and Selective Electrochemical Sensor via Cu-BTC/Au@Cu-BTC Modified Screen-Printed Electrode for the Detection of Chemical Agents10.1021/acsami.5c14635 ↗
3. Engineering Pt/Pd Interfacial Electronic Structures for Highly Efficient Hydrogen Evolution and Alcohol Oxidation10.1021/acsami.7b05290 ↗
4. Effects of Filament Extrusion, 3D Printing and Hot-Pressing on electrical and Tensile Properties of Poly(Lactic) Acid Composites Filled with Carbon Nanotubes and Graphene10.3390/nano10010035 ↗
5. Electrochemical (Bio)Sensors Enabled by Fused Deposition Modeling-based 3D Printing: a Guide to Selecting designs, Printing Parameters, and Post-Treatment Protocols10.1021/acs.analchem.1c05523 ↗
6. 3D Printed Graphene Electrodes’ Electrochemical Activation10.1021/acsami.8b14701 ↗
7. Additively manufactured electrochemical platforms from reclaimed ground tire rubber for environmental monitoring10.1039/D5GC02259B ↗
8. Transparent and High Refractive Index Thermoplastic Polymer Glasses using Evaporative Ligand Exchange of Hybrid Particle Fillers10.1021/acsami.6b12666 ↗
9. Bioderived Laser-Induced Graphene for Sensors and Supercapacitors10.1021/acsami.3c07687 ↗
10. Unraveling the Versatility of Carbon Black – Polylactic Acid (CB/PLA) 3D‐Printed Electrodes via Sustainable Electrochemical Activation10.1002/smtd.202402214 ↗
11. Posttreatment of 3D‐printed surfaces for electrochemical applications: a critical review on proposed protocols10.1002/elsa.202100136 ↗
12. Can the mechanical activation (polishing) of screen-printed electrodes enhance their electroanalytical response?10.1039/C6AN00167J ↗
13. The role of electrolysis and enzymatic hydrolysis treatment in the enhancement of the electrochemical properties of 3D-printed carbon black/poly(lactic acid) structures10.1016/j.apsusc.2021.151587 ↗
14. Mechanical behaviour of the post processed 3D printed PLA parts using polar and non-polar solvents10.1007/s00289-023-04900-8 ↗
15. Preserving Fine Structure details and Dramatically Enhancing Electron transfer rates in Graphene 3D-printed Electrodes via thermal Annealing: Toward Nitroaromatic Explosives Sensing10.1021/acsami.9b06683 ↗
16. Microwave-Induced Processing of Free-standing 3D Printouts: an Effortless Route to High-Redox Kinetics in Electroanalysis10.3390/ma17122833 ↗
17. Portable Atmospheric Air Plasma Jet Pen for the Surface Treatment of Three-Dimensionally (3D)-Printed Electrodes10.1021/acs.analchem.4c02785 ↗
18. Additive-manufactured (3D-printed) electrochemical sensors: a critical review10.1016/j.aca.2020.03.028 ↗
19. Helium-assisted, solvent-free electro-activation of 3D printed conductive carbon-polylactide electrodes by pulsed laser ablation10.1016/j.apsusc.2021.149788 ↗
20. Reagentless and sub-minute laser-scribing treatment to produce enhanced disposable electrochemical sensors via additive manufacture10.1016/j.cej.2021.130594 ↗
21. Laser ablation of polymers: a review10.1002/pi.5834 ↗
22. Laser-Induced Graphitization of Polydopamine on Titania Nanotubes10.1021/acsami.3c11580 ↗
23. Investigation of the differences between photochemical and photothermal laser ablation on the shear strength of CFRP/CFRP adhesive joints10.1016/j.ijadhadh.2020.102548 ↗
24. Interaction of Photons with Polymers: from Surface Modification to Ablation10.1002/ppap.200500036 ↗
25. The Influence of the Processing Parameters on the Laser-Ablation of Stainless Steel and Brass during the Engraving by Nanosecond Fiber Laser10.3390/nano12020232 ↗
26. Graphite sheet as a novel material for the collection and electrochemical sensing of explosive residues10.1016/j.talanta.2019.05.048 ↗
27. A novel 3D-printed graphite/polylactic acid sensor for the electrochemical determination of 2,4,6-trinitrotoluene residues in environmental waters10.1016/j.chemosphere.2023.139796 ↗
28. A statistical overview of standard (IUPAC and ACS) and new procedures for determining the limits of detection and quantification: Application to voltammetric and stripping techniques (Technical Report)10.1351/pac199769020297 ↗
29. A wettability-based approach for the monitoring of drug transport through biological membranes10.1016/j.jcis.2019.07.111 ↗
30. In pursuit of key features for constructing electrochemical biosensors – electrochemical and acid-base characteristic of self-assembled monolayers on gold10.1080/10610278.2020.1739685 ↗
31. Role of surface roughness in the wettability, surface energy and flotation kinetics of calcite10.1016/j.powtec.2020.05.081 ↗
32. Laser induced 3D printed graphene enhanced thermoplastic polyurethane structure for improved anisotropy and Photo-/Electro-thermal deicing performance10.1016/j.cej.2025.162399 ↗
33. From Dielectric to Electro-Responsive Thermoplastics: an Approach based on Electro-thermal Reorientation and Charged Gas Activation10.1021/acsapm.4c02610 ↗
34. Assessing the Time Dependence of AOPs on the Surface Properties of Polylactic Acid10.1007/s10924-022-02608-w ↗
35. Characterizing Graphitic Carbon with X‐ray Photoelectron Spectroscopy: a Step‐by‐Step Approach10.1002/cctc.201500344 ↗
36. Impact of the Fused Deposition (FDM) Printing Process on Polylactic Acid (PLA) Chemistry and Structure10.3390/app7060579 ↗
37. Combined XPS and TPD study of oxygen-functionalized carbon nanofibers grown on sintered metal fibers10.1016/j.carbon.2010.01.029 ↗
38. Synthesis and Properties of Novel Polyurethanes Containing Long-Segment Fluorinated Chain Extenders10.3390/polym10111292 ↗
39. Surface modification of a thermoplastic polyurethane by low‐pressure plasma treatment to improve hydrophilicity10.1002/app.34348 ↗
40. Roughness and Fiber Fraction Dominated Wetting of Electrospun Fiber-based Porous Meshes10.3390/polym11010034 ↗
41. Insights into the role of defects on the Raman spectroscopy of carbon nanotube and biomass-derived carbon10.1016/j.carbon.2024.118998 ↗
42. Synthesis of silicon carbide nanocrystals and multilayer graphitic carbon by femtosecond laser irradiation of polydimethylsiloxane10.1039/D0NA00133C ↗
43. Laser-induced reduction of graphene oxide powders by high pulsed ultraviolet laser irradiations10.1016/j.apsusc.2018.03.090 ↗
44. The Stability of UV-Defluorination-Driven Crosslinked Carbon Nanotubes: a Raman Study10.3390/nano14171464 ↗
45. Effects of high-repetition-rate femtosecond laser micromachining on the physical and chemical properties of polylactide (PLA)10.1364/OE.23.026932 ↗
46. Optical and chemical effects governing femtosecond laser-induced structure formation on polymer surfaces10.1016/j.mtcomm.2018.01.008 ↗
47. Surface Dynamics of Polymer Glasses: Sub- Tg Surface Reorganization in End-Functional Polymers10.1021/ma301513s ↗
48. O3 /UV Synergistic Aging of Polyester polyurethane Film Modified by Composite UV Absorber
49. Photodegradation of polyester-urethane coatings, (2015).
50. Porous Laser-Scribed Graphene Electrodes Modified with Zwitterionic Moieties: a strategy for Antibiofouling and Low-Impedance Interfaces10.1021/acsami.3c15849 ↗
51. Dependence of the Electrochemical Behavior of Redox-Functionalized Calix[4]arene Monolayers on Intermolecular Interactions in a Structurally Controlled Interfacial Architecture10.1021/acsami.5c18659 ↗
52. Optimization and electrochemical activation of magnetron-sputtered DLC films for enhanced electrode performance10.1016/j.electacta.2025.147383 ↗
53. Locally sculptured modification of the electrochemical response of conductive poly(lactic acid) 3D prints by femtosecond laser processing10.1016/j.electacta.2022.140288 ↗
54. Wetting transition from the Cassie–Baxter State to the Wenzel State on Textured Polymer Surfaces10.1021/la4049067 ↗
55. UV-Surface Treatment of Fungal Resistant Polyether polyurethane Film-Induced growth of Entomopathogenic Fungi10.3390/ijms18071536 ↗
56. Adhesion Improvement of Thermoplastics-based Composites by Atmospheric Plasma and UV Treatments10.1007/s10443-020-09854-y ↗
57. Screening of the Supercritical Impregnation of Olea europaea Leaves Extract into Filaments of Thermoplastic polyurethane (TPU) and Polylactic Acid (PLA) Intended for Biomedical applications10.3390/antiox11061170 ↗
58. Development and Application of 3D‐Printed Electrochemical Sensors for Ciprofloxacin Detection10.1002/elan.12008 ↗
59. Electroanalytical overview: the measurement of ciprofloxacin10.1039/D3SD00129F ↗
60. Highly sensitive electrochemical detection of paracetamol based on MnO2/MWCNTs-NH2 composite10.1016/j.inoche.2022.110105 ↗
61. Electrochemical methods for the determination of acetaminophen in biological matrices: a critical review in the clinical field10.1016/j.aca.2024.343243 ↗
62. Electrochemical properties of the acetaminophen on the screen printed carbon electrode towards the high performance practical sensor applications10.1016/j.jcis.2016.08.028 ↗
63. Handheld-pen plasma treatment of graphite sheet electrodes for highly sensitive detection of emerging pollutants in waters10.1016/j.jece.2025.117002 ↗
64. Robotic Plasma System for Rapid Activation of Mass-Produced Electrochemical Sensors10.1021/acs.analchem.5c04556 ↗
65. From conductive filament design to 3D-printed devices: a critical review and development guide for advanced electrochemical applications10.1039/D5TA09486K ↗