Enhancing moisture resistance, storage stability, and thermal decomposition of ultrafine ammonium perchlorate via a superhydrophobic silica coating
Source abstract
Abstract
Superhydrophobic materials hold significant potential in enhancing the moisture resistance of ultrafine ammonium perchlorate (UF-AP). Current UF-AP moisture resistance research primarily focuses on coating with hydrophobic layers, yet challenges persist including incomplete coating coverage, complex preparation processes, and thermal decomposition issues caused by inert components. To improve UF-AP's moisture resistance, this study employs an innovative approach: First, superhydrophobic SiO₂-MTMS material was prepared by treating nano-silica (SiO₂) with methyltrimethoxysilane (MTMS) hydrolysis and silanization. Subsequently, SiO₂-MTMS particles were firmly and efficiently coated onto the UF-AP surface via dissolution-evaporation, yielding the UF-AP/SiO₂-MTMS composite hydrophobic material. This material not only enhances UF-AP's moisture resistance and storage performance but also improves its thermal analysis properties. Experimental results indicate that at a SiO₂-MTMS coating content of 4%, the composite particles exhibit a moisture absorption rate of only 0.09%, representing a 65.4% reduction compared to the original UF-AP. After 30 days of storage, the particles maintain a near-spherical shape and excellent dispersion, while the total heat release increases by 16.90% relative to UF-AP. This study provides a practical technical solution for the large-scale production of UF-AP.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Energetic Materials and Combustion · Surface Modification and Superhydrophobicity · Chemical Analysis and Environmental Impact
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (94)
Show source-provided references
1. HTPB propellant binder supplemented with nitro potato starch: formulation, characterization, and thermal decomposition behavior
2. Ti3C2 MXene: a reactive combustion catalyst for efficient burning rate control of ammonium perchlorate based solid propellant10.1016/j.carbon.2021.10.069 ↗
3. Study on dual-phase FeCoNiMoCu high-entropy alloys with enhanced lattice distortion in Co-thermal decomposition of ammonium perchlorate10.1016/j.matchemphys.2025.131848 ↗
4. L. Liu, S. Yue, Z. Wen, W. Zhang, P. Liu, G. He, W. AO, Formulation effect on combustion and agglomeration characteristics in nitramine solid propellants, Acta Astronaut 219 (2024) 60-70, Doi: 10.1016/J.ACTAASTRO.2024.03.011.10.1016/j.actaastro.2024.03.011 ↗
5. Thermal, kinetic, and artificial neural network investigations of ammonium perchlorate/CeMnxFe1-xO3 high energetic formulations10.1016/j.matchemphys.2025.131695 ↗
6. Z. Wang, A. Pang, J. HE, Q. Lei. Application and development of energetic compounds in solid propellants, Journal of Solid Rocket Technology 48(2025): 1-8.
7. A review on the use of nanometals as catalysts for the thermal decomposition of ammonium perchlorate10.1016/j.jscs.2011.05.009 ↗
8. Investigation of catalytic activity of ZnAl2O4 and ZnMn2O4 nanoparticles in the thermal decomposition of ammonium perchlorate10.1007/s10973-016-5906-8 ↗
9. Template-assisted synthesis of 3D ordered macroporous structured CuO as catalyst for ammonium perchlorate10.1142/S1793604717500308 ↗
10. Particle size effect on ammonium perchlorate decomposition kinetics, Journal of Aerospace
11. Study on improving the thermal decomposition, safety and anti-moisture absorption properties of ultrafine ammonium perchlorate based on hydrophobic bionics
12. Preparation and characterization of hydrophobic surface of ammonium perchlorate
13. Advances in the application of nanomaterials in solid propellants
14. Anti-aggregation technology of the superfine powder of AP
15. J. Wu, X. Geng, X. Jia,Y. Zhang, X. OU, S. Yang, F. Jia, Q. Wang, and X. Feng, Novel technique of capilary penetration on characterizing agglomerative state of ultra-fine AP, Journal of Solid Rocket Technology 33 (2010) 703-707.
16. Research progress in the preparation and modification technology of iltrafine ammonium perchlorate
17. Design of anti-hygroscopic properties of oxidizer materials
18. Caking of crystals: characterization, mechanisms and prevention10.1016/j.powtec.2017.04.052 ↗
19. Y. Wang, Z. Chen, C. Huang, Q. Qin, H. Zhang, X. Chen P. Zhang, Superhydrophobic membranes with enhanced pore surface hydrophobicity for stable membrane distillation of hypersaline wastewater, Science China(Materials) 68(2025) 4155-4163.10.1007/s40843-025-3574-9 ↗
20. Efficient construction of core/double-shelled structured AP@nano-graphite@F2603 energetic microcapsules with low sensitivity and hygroscopicity10.1039/D4NR04234D ↗
21. Preventing agglomeration and enhancing the energetic performance of fine ammonium perchlorate through surface modification with hydrophobic reduced graphene oxide
22. Y. Li, T. Wen, X. Huang, W. Song, R. Wang, Q. Wu, and C. Guo, Bio-inspired hydrophobic copper stearate coating to educe the moisture absorption of fine-grained ammonium erchlorate and improve safety and thermal decomposition erformance, Journal of Physics and Chemistry of Solids,179(2023)111416, Doi: 10.1016/J.JPCS.2023.111416.10.1016/j.jpcs.2023.111416 ↗
23. Integrated control technology of thermal decomposition,moisture absorption and safety performance of UF-AP
24. Preparation of AP@ZIF-7 composite materials by chemical precipitation method: a good strategy for simultaneously improving its thermal performance, energy property and moisture absorption10.1016/j.powtec.2023.119230 ↗
25. Performance of powder propellant based on AP pretreatment technology
26. Effect of moisture content on adhesive properties of fine ash in entrained-flow coal gasification
27. Interfacial engineering endowing ammonium perchlorate with high mechanical properties and energy-release efficiency10.1016/j.ceramint.2024.05.329 ↗
28. Study on modification of nano-silica and its dispersibility in EVA
29. Factors influencing on the preparation of ultrafine energetic core-shell composite materials
30. Preparation of superhydrophobic coatings by saturated fatty acid modification using a one-step spraying method10.1016/j.apsusc.2025.162612 ↗
31. Near-infrared responsive superhydrophobic-hydrophilic transition coatings: a study on corrosion resistance and biological performance10.1016/j.apsusc.2025.163496 ↗
32. Biomimetic superhydrophobic surfaces by nanoarchitectonics with natural sunflower pollen
33. Superhydrophobicity of direct plasma synthesized and deposited thin films: effect of chemical-induced and substrate roughness10.1016/j.apsusc.2024.159700 ↗
34. Environment-responsive coatings with recoverable in-air superamphiphobicity and underwater superoleophobicity
35. L. Zhang, Y. Mehanna, C. Crick and R. Poole Surface Tension and Viscosity Dependence of Slip Length over Irregularly Structured Superhydrophobic Surfaces, Langmuir : the ACS journal of surfaces and colloids 38 (2022) Doi: 10.1021/ACS.LANGMUIR.2C01323.10.1021/acs.langmuir.2c01323 ↗
36. Coatings super-repellent to ultralow surface tension liquids10.1038/s41563-018-0178-2 ↗
37. M. Imran, A. Islam, P. Zhang, F. Ismail, G. Zhang and E. Din, Green fabrication, characterization and water-oil separation properties of superhydrophilic/oleophobic grapefruit peel-derived aerogel, Applied Surface Science 566(2021)10.Doi: 1016/J.APSUSC.2021.150721.10.1016/j.apsusc.2021.150721 ↗
38. Preparation of stainless steel superhydrophobic surface and analysis of hydrophobic mechanism10.1021/acs.langmuir.4c02801 ↗
39. Tuning wetting properties through surface geometry in the cassie–baxter state10.3390/biomimetics10010020 ↗
40. Ultrarapid fabrication of robust and versatile superhydrophobic polysiloxane coatings with superior repellency10.1016/j.jcis.2025.137569 ↗
41. T. Li, Y. Peng, H. You, X. Guan and J. Lv, Chong Yang, Recent Developments in the Fabrication and Application of Superhydrophobic Suraces, Chemical record 24 (2024) e202400065, Doi: 10.1002/TCR.202400065.10.1002/tcr.202400065 ↗
42. X. Wen, C. Hong, H. Li, F. Xu, Y. Li and J. Sun, Supramolecular polymer-based, ultra-robust, and nonfluorinated, sub-zero temperature self-healing superhydrophobic coatings for energy harvesting, Nano Energy 125(2024)109561, 10.Doi: 1016/J.NANOEN.2024.109561.10.1016/j.nanoen.2024.109561 ↗
43. Fabrication of superhydrophobic membrane via one-step spraying strategy utilizing organosilicon chemistry and its performance in membrane distillation10.1007/s10118-025-3488-2 ↗
44. Renewable superhydrophobic antifouling composite silicone based on micro-nano structure10.1016/j.compscitech.2025.111111 ↗
45. Superamphiphobic organosilane-grafted attapulgite as an effective corrosion-resistant and anti-icing coating for aluminum alloy10.1016/j.colsurfa.2024.134405 ↗
46. Solvent-free synthesis of self-regenerative superhydrophobic film from silicone waste with drag-reduction and selective oil absorption behaviour10.1016/j.cej.2024.150479 ↗
47. Low-frequency Raman spectroscopy as a new tool for understanding the behaviour of ionisable compounds in dispersed mesophases10.1016/j.jcis.2024.12.032 ↗
48. Hierarchical composite structure to simultaneously realize superior superhydrophobicity and anti-reflection10.1016/j.apsusc.2022.155652 ↗
49. Functional and versatile superhydrophobic coatings via stoichiometric silanization10.1038/s41467-021-21219-y ↗
50. Superhydrophobic tensile designability of silicone rubber composites
51. Efficient fabrication of lightweight polyethylene foam with robust and durable superhydrophobicity for self-cleaning and anti-icing applications
52. Preparation of a robust SiO2/PDMS superhydrophobic coating and stability performance study
53. Preparation of hydrophobic silica particles for superhydrophobic modified waterborne polyurethane resin
54. Study on preparation and oil/water separation performance of silica-mediated superhydrophobic/superoleophilic hybrid sponge
55. W. Zhang,C. Feng,L. Zhang,and S. Jin,Research on Glass Fiber Cloth Reinforced Hollow SiO2 Spheres Filled Polyolefin Composite Material,Modern Plastics Processing and Applications,37(2025)29-31,Doi: 10.19690/j.issn1004-3055.20240035.
56. Y. Gu, Y. Zhu, B. Wang, Z. Dong, Gu X., C. Yang, M. Cui, X. Zhang, Preparation and properties of polylactic acid/electret melt-blown nonwovens,44(2023)41-49,Doi: 10.13475/j.fzxb.20220302701.
57. A durable PVDF/PFOTES-SiO2 superhydrophobic coating on AZ31B Mg alloy with enhanced abrasion resistance performance and anti-corrosion properties10.3390/app112311172 ↗
58. Design and preparation of hydrophobic silica particles and study on modified epoxy resin
59. Superhydrophobic surfaces: fundamentals, manufacture, and applications
60. Study on effect of MTMS modification on weatherability of SiO2 anti-reflective coating
61. Surface modification of SiO2-based methyltrimethoxysilane (MTMS) using cetyltrimethyl ammonium bromide (CTAB) on the wettability effects through hierarchical structure10.1007/s10971-023-06202-x ↗
62. Estimation of the surface free energy of polymers10.1002/app.1969.070130815 ↗
63. An essay on the cohesion of fluids
64. Fe3O4/SiO2/APTMS nanoparticles with core-shell structure as potential materials for cooper removal
65. Synthesis of APTMS-functionalized SiO2/TiO2 transparent film using peroxo titanic acid refluxed solution for formaldehyde removal10.1007/s11270-009-0268-5 ↗
66. STM and HREELS investigation of gas phase silanization on hydroxylated Si(100)10.1016/j.susc.2010.03.003 ↗
67. Thermal decomposition characteristics and burning rate of ammonium perchlorate containing various catalysts
68. Preparation and characterization of core-shell structured AP/SiO2 nanocomposites
69. Effect of SiO2 coating on the thermal decomposition behavior of ammonium perchlorate
70. Fabrication and characterization of AP/SiO2 nanocomposites with enhanced thermal decomposition properties
71. Superflexible multifunctional polyvinylpolydimethylsiloxane-based aerogels as efficient absorbents, thermal superinsulators, and strain sensors10.1002/anie.201804559 ↗
72. Tailoring structural and physical properties of polymethylsilsesquioxane aerogels by adjusting NH3·H2O concentration
73. Preparation and performance study of fluorinated polymer-nano-SiO2 composite coatings
74. Surface properties and interfacial interactions of AP/HTPB composite solid propellants: a review
75. Wettability and surface energy analysis of modified SiO2 nanoparticles for energetic composite applications
76. Surface modification of ammonium perchlorate with methyltrimethoxysilane for reducing hygroscopicity and improving thermal decomposition
77. Wetting on hydrophobic rough surfaces: to be heterogeneous or not to be?10.1021/la0344682 ↗
78. Critical evaluation of the Cassie-Baxter equation for determining the surface porosity of hydrophobic membranes using contact angle analysis10.1016/j.ces.2025.122796 ↗
79. Correlation between reversed-phase retention and solute molecular surface type and area10.1016/S0021-9673(01)94489-9 ↗
80. Mechanistic insights into the superhydrophobic behavior of stearic acid-functionalized microscale re-entrant architectures10.1016/j.colsurfa.2025.138163 ↗
81. Preparation of organosilica membranes on hydrophobic intermediate layers and evaluation of gas permeation in the presence of water vapor10.1016/j.memsci.2015.08.050 ↗
82. Hardening of particle/oil/water suspensions due to capillary bridges: experimental yield stress and theoretical interpretation10.1016/j.cis.2017.11.004 ↗
83. Anti-adhesive behaviors between solid hydrate and liquid aqueous phase induced by hydrophobic silica nanoparticles10.1021/acs.langmuir.6b02729 ↗
84. Regulation of calcination temperature on structural engineering of MgCo2Oz catalyst for enhanced thermal decomposition of ammonium perchlorate
85. Establishing a coating of ferrocene-based hyperbranched polymer on ammonium perchlorate: Enhancing the anti-migration and catalytic performance10.1016/j.materresbull.2024.112708 ↗
86. Applications of hybrid organic–inorganic nanocomposites10.1039/b509097k ↗
87. Thermal decomposition of ammonium perchlorate in the presence of nanosized ferric oxide10.14429/dsj.58.1699 ↗
88. Core-shell structured AP/Fe3O4 composite with enhanced catalytic thermal decomposition property: Fabrication and mechanism study10.1016/j.ces.2021.116899 ↗
89. HTPB propellant aging mechanisms and safety characteristics: microscopic structural changes, thermal stability, and self-accelerating decomposition temperature10.1016/j.csite.2025.106295 ↗
90. Effect of surface coating CeO2 on the SO2 resistance of Cu-ZSM-5 with highly selective catalytic reduction activity10.1007/s11144-024-02667-1 ↗
91. Catalytic effect of SiO2/Co3O4 core-shell catalyst on thermal decomposition of AP
92. Fabrication of Si@AP/NC metastable intermixed nanocomposites (MICs) by electrospray method and their thermal reactivity10.1007/s42114-019-00098-4 ↗
93. On the promotion of high temperature AP decomposition with silica mesoparticles, on the promotion of high temperature AP decomposition with silica mesoparticles10.1016/j.combustflame.2018.11.021 ↗
94. Mechanical sensitivity reduction of energetic materials by using carbon nanomaterials10.1088/1742-6596/2478/3/032010 ↗