journal article·2026-09

Improving the wear resistance of lightweight refractory Al0.5Ti2NbZrM(M = V/Cr/W) HEA coatings on Ti6Al4V through alloying-controlled microstructure

Ruirui Dai, Hainan Wang, Ao Wei, Guijiang Diao, Lili Meng, Xianhua Tian, Marco Alfano, Junfeng Yuan

Publisher page

Abstract

To improve the wear resistance of Ti6Al4V, lightweight refractory high-entropy alloy coatings were deposited on Ti6Al4V using laser-directed energy deposition. This work focuses on the Al0.5Ti2NbZrM(M = V/Cr/W) coatings, aiming to illuminate the role of V, Cr, and W alloying induced microstructural evolution in governing the wear mechanisms at different temperatures. The results show that V alloying resulted in a single-phase BCC, whereas Cr alloying led to a minor ZrCr2 phase and W addition induced multiple BCC precipitates. Strengthening from dislocations, precipitation, and grain refinement in the Cr and W addition coatings improved hardness and deformation resistance. As the microstructure evolves, the wear mechanism transitions from combined abrasive-oxidative to abrasive wear with fatigue spalling at 25 °C, while it evolves from mixed oxidation and abrasive to primarily oxidative wear at 600 °C. Notably, the wear rate of the W-alloyed coating achieved a wear rate as low as 3.68 × 10-5 mm3/Nm at 600 °C. The enhanced wear resistance at elevated temperature is mainly ascribed to multiphase BCC microstructure induced by W alloying that enhances load-bearing capacity and to the development of a dense glaze layer (ZrO2). Moreover, subsurface reinforcement by dispersed W-rich phases stabilizes the glaze layer and suppresses delamination and adhesive spallation.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High Entropy Alloys Studies · Additive Manufacturing Materials and Processes · High-Temperature Coating Behaviors

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (62)

Show source-provided references
1. Invited review article: Metal-additive manufacturing—Modeling strategies for application-optimized designs [J]
2. Investigation of elevated temperature microstructural stability and tribological behavior of MoxNbTiZr refractory high-entropy alloy coatings optimized by Mo-doping [J]10.1016/j.triboint.2024.109544 ↗
3. Perspectives on titanium science and technology [J]10.1016/j.actamat.2012.10.043 ↗
4. Phase evolution characteristics and corrosion behavior of FeCoCrAlCu-X0. 5 coatings on cp Cu by laser high-entropy alloying [J]10.1016/j.optlastec.2017.03.023 ↗
5. Refractory alloying additions on the thermal stability and mechanical properties of high-entropy alloys [J]10.1016/j.msea.2020.140020 ↗
6. Mechanical properties of Nb25Mo25Ta25W25 and V20Nb20Mo20Ta20W20 refractory high entropy alloys [J]10.1016/j.intermet.2011.01.004 ↗
7. Effect of alloy empirical design parameters and process methods on refractory high-entropy alloys (RHEA) microstructure and mechanical properties: a review [J]10.1007/s43452-025-01341-0 ↗
8. Tensile creep behavior of HfNbTaTiZr refractory high entropy alloy at elevated temperatures [J]10.1016/j.actamat.2022.118188 ↗
9. N. Stepanov, N.Y. Yurchenko, D. Skibin, M. Tikhonovsky, G. Salishchev, Structure and mechanical properties of the AlCrxNbTiV(x= 0, 0.5, 1, 1.5) high entropy alloys [J], J. Alloy. Compd., 652 (2015) 266-280, Doi: 10.1016/j.jallcom.2015.08.224.10.1016/j.jallcom.2015.08.224 ↗
10. Ductile Ti1.5ZrNbAl0.3 refractory high entropy alloy with high specific strength [J]10.1016/j.matlet.2021.129428 ↗
11. A lightweight Al0.8Nb0.5Ti2V2Zr0.5 refractory high entropy alloy with high specific yield strength [J]10.1016/j.matlet.2022.133144 ↗
12. Structure and mechanical properties of near-eutectic refractory Al-Cr-Nb-Ti-Zr high entropy alloys [J], IOP Conf. Ser
13. N.Y. Yurchenko, N. Stepanov, D. Shaysultanov, M. Tikhonovsky, G. Salishchev, Effect of Al content on structure and mechanical properties of the AlxCrNbTiVZr(x= 0; 0.25; 0.5; 1) high-entropy alloys [J], Mater. Charact., 121 (2016) 125-134, Doi: 10.1016/j.matchar.2016.09.039.10.1016/j.matchar.2016.09.039 ↗
14. Phase and tribological behavior of Al0.5Ti2NbVZrx lightweight refractory HEA coatings [J]
15. Predictive Modeling and Optimization of Layer-Cladded Ti-Al-Nb-Zr High-Entropy Alloys using Machine Learning [J]10.3390/coatings14101319 ↗
16. Microstructure and high-temperature wear behavior of TiZrNbAlx light-weight refractory high-entropy alloy coatings prepared by laser cladding on Ti6Al4V titanium alloy [J]
17. Laser-clad AlNbTiVZr lightweight refractory high-entropy alloy coating on Ti6Al4V: Microstructural characterization and wear resistance [J]10.1016/j.jallcom.2025.180425 ↗
18. Light-weight refractory high-entropy alloys: a comprehensive review [J]10.1016/j.jmst.2022.11.054 ↗
19. Microstructures, properties and preparations of lightweight refractory high-entropy alloys: a review [J]
20. Effect of Nb, Ti, and V on wear resistance and electrochemical corrosion resistance of AlCoCrNiMx (M= Nb, Ti, V) high-entropy alloys [J]
21. Anomalous microstructure and excellent mechanical behaviors of (CoCrFeNi) 6-x-yCrxAly high-entropy alloy induced by Cr and Al addition [J]10.1016/j.msea.2019.02.071 ↗
22. Effect of V addition on the microstructure and wear resistance of CoCrFeNiNb high-entropy alloy laser cladding layers [J]10.1016/j.intermet.2025.108654 ↗
23. Effects of Cr incorporation on the microstructure, tribological and mechanical properties of laser cladding (TiNbTaZr)100-xCrx(x= 0, 5, 10, 20) high entropy alloy coatings [J]10.1016/j.surfcoat.2025.132082 ↗
24. Grain refinement and abnormal peritectic solidification in WxNbTiZr high-entropy alloys [J]10.1016/j.matdes.2022.111381 ↗
25. Preparation and effect of vanadium addition on the mechanical properties of CoCrFeNiVx high-entropy alloy [J]10.1016/j.jmrt.2023.11.180 ↗
26. High temperature tribology of CuMoTaWV high entropy alloy [J]10.1016/j.wear.2018.12.085 ↗
27. Corrosion and wear behaviors of AlCoCr1+xFe1-xNi2.1 high-entropy alloys [J]10.1016/j.corcom.2024.07.009 ↗
28. Synergistic enhancement of strength and wear resistance in nickel-based superalloy fabricated by oscillating laser directed energy deposition via laser shock peening [J]10.1016/j.jmrt.2026.02.104 ↗
29. J. Tang Z.-S. Li X.-B. Liu G.-D. Chen F. Liu S. Wang F.-G. Meng D.-S. Wang K.-M. Wang Tribology and oxidation properties of Graphite/CuNiTiCrNb HEA coatings produced by laser cladding [J] 2026 Carbon 10.1016/j.carbon.2026.121261 121261.10.1016/j.carbon.2026.121261 ↗
30. Solid‐solution phase formation rules for multi‐component alloys [J]10.1002/adem.200700240 ↗
31. Effects of Al addition on structural evolution and tensile properties of the FeCoNiCrMn high-entropy alloy system [J]10.1016/j.actamat.2013.09.037 ↗
32. Microstructure and properties of Al0. 5NbTi3VxZr2 refractory high entropy alloys combined with high strength and ductility [J]10.1016/j.jmrt.2023.03.103 ↗
33. Contact modeling—forces [J]10.1016/S0301-679X(00)00063-3 ↗
34. Microstructure and tribological properties of plasma sprayed FeCoNiCrSiAlx high entropy alloy coatings [J]
35. Steady state columnar and equiaxed growth of dendrites and eutectic [J]10.1016/0025-5416(84)90201-5 ↗
36. Wear-resistant high manganese steel/WC composite coatings with twinning-induced hardening ability prepared by laser cladding [J]
37. Amorphization at twin-twin intersected region in FeCoCrNi high-entropy alloy subjected to high-pressure torsion [J]10.1016/j.matchar.2017.02.027 ↗
38. Twinning mediated plasticity in high entropy CoCr1.3FeNi0.7MnNbx(x= 0.3, 0.367, 0.4) ultrafine lamellar eutectic by tuning stacking fault energy [J]10.1016/j.scriptamat.2022.115271 ↗
39. Influence of ceramic particles and process parameters on residual stress of flame-sprayed Fe-based coatings [J]10.1016/j.surfcoat.2018.08.069 ↗
40. Process parameter optimization and EBSD analysis of Ni60A-25% WC laser cladding [J]10.1016/j.ijrmhm.2021.105675 ↗
41. Solidification shrinkage and shrinkage-induced melt convection and their relation with solute segregation in binary alloys [J]10.1016/j.commatsci.2022.111815 ↗
42. Dislocation-induced stop-and-go kinetics of interfacial transformations [J]10.1038/s41586-022-04880-1 ↗
43. Aluminum and titanium alloyed non-equiatomic Co–Fe–Ni medium-entropy alloy with ultra high strength and hardness [J]10.1016/j.msea.2021.141297 ↗
44. Experimental and theoretical study of Ti20Zr20Hf20Nb20X20(X= V or Cr) refractory high-entropy alloys [J]10.1016/j.ijrmhm.2014.07.009 ↗
45. Effect of cold-work on the Hall–Petch breakdown in copper based micro-components [J]10.1016/j.mechmat.2014.10.003 ↗
46. A comparative study on microstructure and properties of traditional laser cladding and high-speed laser cladding of Ni45 alloy coatings [J]10.1016/j.surfcoat.2020.126582 ↗
47. A comparison of heat treatment effect on structural and tribological properties of tungsten rich Ni-W and Ni-WP alloy coatings [J]10.1016/j.triboint.2024.109876 ↗
48. Microstructure, mechanical property and high temperature wear mechanism of AlCoCrFeNi/WC composite coatings deposited by HVOF [J]10.1016/j.ceramint.2025.01.249 ↗
49. Effect of temperature and mating pair on tribological properties of DLC and GLC coatings under high pressure lubricated by MoDTC and ZDDP [J]10.1007/s40544-020-0420-1 ↗
50. Ductile and brittle crack-tip response in equimolar refractory high-entropy alloys [J]10.1016/j.actamat.2020.03.004 ↗
51. Enhanced wear resistance in (CoCrNi)94Al3Ti3 medium-entropy alloy at high temperatures via nano-Al2O3 reinforcing phase [J]10.1016/j.triboint.2024.109569 ↗
52. Recent research and development status of laser cladding: a review [J]10.1016/j.optlastec.2021.106915 ↗
53. Evolution of microstructure homogeneity and mechanical properties in nano-/ultrafine eutectic CoCrFeNiNbx(0.45≤ x≤ 0.65) high entropy alloy ingots and cast rods [J]10.1016/j.jallcom.2022.163610 ↗
54. Laves type intermetallic compounds as hydrogen storage materials: a review [J]10.1016/j.jallcom.2022.165219 ↗
55. The effectiveness of oxides in reducing sliding wear of alloys [J]10.1007/BF00664227 ↗
56. Effect of flash temperature on tribological properties of bulk metallic glasses [J]10.1007/s11249-009-9444-4 ↗
57. Concurrently achieving strength-ductility combination and robust anti-wear performance in an in-situ high-entropy bulk metallic glass composite [J]10.1016/j.compositesb.2024.111222 ↗
58. Achieving excellent mechanical and robust lubrication behavior in the CoCrNi medium-entropy alloy via in-situ graphite [J]10.1016/j.carbon.2024.119503 ↗
59. Altering the metastable wear performance of metallic glasses via mixing entropy regulation [J]10.1002/adfm.202507634 ↗
60. On the enhanced wear resistance of laser-clad CoCrCuFeNiTix high-entropy alloy coatings at elevated temperature [J]10.1016/j.triboint.2022.107767 ↗
61. Thermochemical data of pure substances [C]
62. Lubrication in fretting—a review [J]10.1016/S0043-1648(99)00038-1 ↗