journal article·2026-08

3D-Printed Aminosilane-Functionalized CB-PLA filters for heavy metal ion adsorption under flow conditions

Kornelia Kozłowska-Wysocka, Mateusz Cieślik, Krzysztof Formela, Jacek Ryl, Paweł Niedziałkowski

Publisher page

Abstract

This study demonstrates the preparation of low-cost, effective, and stable 3D-printed filters for water treatment using polylactide doped with carbon black (CB-PLA) and modified with 1% or 10% (3-aminopropyl)trimethoxysilane (APTMS) for the removal of Cd2+ and Pb2+ ions. Surface characterization of the filters was performed using scanning electron microscopy, mechanical tests, contact angle measurements, Raman spectroscopy, and X-ray photoelectron spectroscopy, confirming successful surface modification. The modification mechanism, influenced by APTMS concentration, along with adsorption mechanisms involving metal–ligand complex formation, was proposed. Heavy metal ion removal was evaluated under dynamic flow conditions using differential pulse anodic stripping voltammetry. The obtained results showed that CB-PLA filters modified with 1% APTMS achieved the highest removal efficiencies for Cd2+ (86–90%) and Pb2+ (81–99%), maintaining stable performance over 4 h. Filters modified with 10% APTMS achieved removal efficiencies of approximately 60–70% for Cd2+ and 65% for Pb2+. Pure PLA filters exhibited negligible ion binding, while unmodified CB-PLA showed lower binding for both ions than modified filters. Furthermore, desorption studies indicated that the filters retain their adsorption capacity after multiple reuse cycles. This study reports the first 3D-printed APTMS functionalized CB-PLA filters for water purification, which are regenerable, and cost-efficient for practical applications.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Adsorption and biosorption for pollutant removal · Geochemistry and Elemental Analysis · Chemical Synthesis and Characterization

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (89)

Show source-provided references
1. Water scarcity: Fact or fiction?10.1016/j.agwat.2005.07.001 ↗
2. Reassessing the projections of the World Water Development Report10.1038/s41545-019-0039-9 ↗
3. Unveiling cutting-edge advances in high surface area porous materials for the efficient removal of toxic metal ions from water10.1016/j.pmatsci.2024.101314 ↗
4. Heavy metals pollution from smelting activities: athreat to soil and groundwater10.1016/j.ecoenv.2024.116189 ↗
5. P.B. Tchounwou, C.G. Yedjou, A.K. Patlolla, D.J. Sutton, Heavy Metal Toxicity and the Environment, in: A. Luch (Ed.), Molecular, Clinical and Environmental Toxicology: Volume 3: Environmental Toxicology, Springer, Basel, 2012: pp. 133–164. Doi: 10.1007/978-3-7643-8340-4_6.10.1007/978-3-7643-8340-4_6 ↗
6. Health and environmental effects of heavy metals10.1016/j.jksus.2021.101653 ↗
7. Removal of heavy metal ions from wastewater: a comprehensive and critical review
8. Review of critical material studies10.1016/j.resconrec.2016.06.003 ↗
9. Development of semiconductor based heavy metal ion sensors for water analysis: a review10.1016/j.sna.2021.112879 ↗
10. Hazards of heavy metal contamination10.1093/bmb/ldg032 ↗
11. Detection and removal of heavy metal ions: a review10.1007/s10311-019-00891-z ↗
12. A review on detection of heavy metal ions in water – an electrochemical approach10.1016/j.snb.2015.02.122 ↗
13. Environmental Remediation and Application of Nanoscale Zero-Valent Iron and its Composites for the Removal of Heavy Metal Ions: a Review10.1021/acs.est.6b01897 ↗
14. A comprehensive review on conventional and biological-driven heavy metals removal from industrial wastewater10.1016/j.envadv.2022.100168 ↗
15. Efficient techniques for the removal of toxic heavy metals from aquatic environment: a review10.1016/j.jece.2017.05.029 ↗
16. Heavy metal pollution in the aquatic environment: efficient and low-cost removal approaches to eliminate their toxicity: a review10.1039/D3RA00723E ↗
17. A comprehensive review on effective removal of toxic heavy metals from water using genetically modified microorganisms10.1016/j.dwt.2024.100553 ↗
18. Nanomaterials for the removal and detection of heavy metals: a review
19. A comprehensive review of nanomaterials for efficient heavy metal ions removal in water treatment10.1016/j.jwpe.2024.105566 ↗
20. A Comprehensive Review on Application of Different Natural and Chemically Modified Nanomaterials Adsorbents for Heavy Metals Removal10.1007/s10904-024-03469-7 ↗
21. Sustainable polymeric adsorbents for adsorption-based water remediation and pathogen deactivation: a review10.1039/D4RA05269B ↗
22. Green sorbents from agricultural wastes: a review of sustainable adsorption materials10.1016/j.apsadv.2023.100562 ↗
23. A Review of Effective Nanoadsorbents made of Carbonaceous, Metal Oxides, and Polymer Nanocomposite Materials for Adsorption of Pharmaceutical Contaminants in Wastewater, Int J
24. A Review of Adsorbents for Heavy Metal Decontamination: growing Approach to Wastewater Treatment10.3390/ma14164702 ↗
25. A review on conventional and novel materials towards heavy metal adsorption in wastewater treatment application10.1016/j.jclepro.2021.126589 ↗
26. The implications of 3D-printed membranes for water and wastewater treatment and resource recovery10.1002/cjce.24488 ↗
27. 3D Printed and conventional Membranes—A Review10.3390/polym14051023 ↗
28. Polymers and Solvents used in Membrane Fabrication: a Review focusing on Sustainable Membrane Development10.3390/membranes11050309 ↗
29. Green solvents for membrane manufacture: recent trends and perspectives
30. 3D printed biomedical devices and their applications: a review on state-of-the-art technologies, existing challenges, and future perspectives10.1016/j.jmbbm.2023.105930 ↗
31. A New era of water treatment technologies: 3D printing for membranes10.1016/j.jiec.2020.07.043 ↗
32. 3D-printed Materials for Wastewater Treatment10.1021/jacsau.3c00409 ↗
33. Perspective on 3D printing of separation membranes and comparison to related unconventional fabrication techniques10.1016/j.memsci.2016.10.006 ↗
34. Review of manufacturing three-dimensional-printed membranes for water treatment10.1007/s11356-020-09452-2 ↗
35. Three-dimensionally printed scaffold coated with graphene oxide for enhanced heavy metal adsorption: batch and fixed-bed column studies10.1016/j.jwpe.2023.104658 ↗
36. Development of lightweight architecture of geopolymer via extrusion-based 3D printing for CO2 capture10.1016/j.jeurceramsoc.2025.117191 ↗
37. 3D printed polylactic acid (PLA) filters reinforced with polysaccharide nanofibers for metal ions capture and microplastics separation from water10.1016/j.cej.2022.141153 ↗
38. Enhancement of wastewater treatment performance using 3D printed structures: a major focus on material composition, performance, challenges, and sustainable assessment10.1016/j.jenvman.2022.114461 ↗
39. 3D printing for membrane desalination: challenges and future prospects10.1016/j.desal.2021.115366 ↗
40. 3D printing calcium alginate adsorbents for highly efficient recovery of U(VI) in acidic conditions10.1016/j.jhazmat.2022.129774 ↗
41. Review: 3-Aminopropyltriethoxysilane (APTES) Deposition Methods on Oxide Surfaces in solution and Vapor Phases for Biosensing applications10.3390/bios13010036 ↗
42. Covalent Surface Modification of Oxide Surfaces10.1002/anie.201306709 ↗
43. Poly (L-lactic acid) coatings on 316 SS substrates for biomedical devices: the impact of surface silanization
44. Dual Modification of Porous Ca-P/PLA Composites with APTES and Alendronate Improves their Mechanical Strength and Cytobiocompatibility towards Human Osteoblasts10.3390/ijms232214315 ↗
45. Protein Immobilization on 3D-printed Biomedical Resins for Biochip applications10.1002/sia.7390 ↗
46. Evaluating different methods to measure porosity in fused filament fabricated metals10.1139/tcsme-2025-0092 ↗
47. Measure of porosity in flax fibres reinforced polylactic acid biocomposites10.1016/j.compositesa.2020.106183 ↗
48. Use of 3-aminopropyltriethoxysilane deposited from aqueous solution for surface modification of III-V materials10.1016/j.apsusc.2014.09.055 ↗
49. Molecular Structure of 3-Aminopropyltriethoxysilane Layers formed on Silanol-Terminated Silicon Surfaces10.1021/jp212056s ↗
50. Simultaneous voltammetric determination of Cd2+, Pb2+, and Cu2+ ions captured by Fe3O4@SiO2 core-shell nanostructures of various outer amino chain length10.1016/j.molliq.2020.113677 ↗
51. How to prevent the loss of Surface Functionality Derived from Aminosilanes10.1021/la802234x ↗
52. Comprehensive Characterization of APTES Surface modifications of Hydrous Boehmite Nanoparticles10.1021/acs.langmuir.0c02682 ↗
53. Role of Solvent on the Silanization of Glass with Octadecyltrichlorosilane10.1021/la00022a038 ↗
54. Structure and growth of Chromophore-Functionalized (3-Aminopropyl)triethoxysilane Self-Assembled on Silicon10.1021/la990557w ↗
55. Improved flexibility of thermally stable poly-lactic acid (PLA)10.1016/j.carbpol.2011.11.078 ↗
56. Silane Layers on Silicon Surfaces: Mechanism of Interaction, Stability, and Influence on Protein Adsorption10.1021/la2036778 ↗
57. Optimization and characterization of biomolecule immobilization on silicon substrates using (3-aminopropyl)triethoxysilane (APTES) and glutaraldehyde linker10.1016/j.apsusc.2014.03.130 ↗
58. A Perspective on Polylactic Acid-based Polymers Use for Nanoparticles Synthesis and applications10.3389/fbioe.2019.00259 ↗
59. Properties of lactic acid based polymers and their correlation with composition10.1016/S0079-6700(02)00012-6 ↗
60. 3D printing of carbon black/polylactic acid/polyurethane composites for efficient microwave absorption10.1007/s10854-023-11036-y ↗
61. Microwave-Induced Processing of Free-standing 3D Printouts: an Effortless Route to High-Redox Kinetics in Electroanalysis10.3390/ma17122833 ↗
62. Conductivity and mechanical properties of carbon black-reinforced poly(lactic acid) (PLA/CB) composites, Iran
63. Solvent-activated 3D-printed electrodes and their electroanalytical potential10.1038/s41598-023-49599-9 ↗
64. Frequency Shift of a SH-SAW Biosensor with Glutaraldehyde and 3-Aminopropyltriethoxysilane Functionalized Films for Detection of Epidermal Growth factor10.3390/bios10080092 ↗
65. Reactive Amine Functionalized Microelectrode Arrays provide Short-Term Benefit but Long-Term Detriment to In Vivo Recording Performance10.1021/acsabm.3c01014 ↗
66. Simple approach to study biomolecule adsorption in polymeric microfluidic channels10.1016/j.aca.2012.11.030 ↗
67. Helium-assisted, solvent-free electro-activation of 3D printed conductive carbon-polylactide electrodes by pulsed laser ablation10.1016/j.apsusc.2021.149788 ↗
68. Facile silane functionalization of graphene oxide10.1039/C8NR04781B ↗
69. The role of electrolysis and enzymatic hydrolysis treatment in the enhancement of the electrochemical properties of 3D-printed carbon black/poly(lactic acid) structures10.1016/j.apsusc.2021.151587 ↗
70. Modification of polylactic acid (PLA) surfaces by argon DBD plasma jet treatment and x–ray irradiation10.1016/j.apsusc.2025.162589 ↗
71. Structure of Plasma (re)Polymerized Polylactic Acid Films Fabricated by Plasma-Assisted Vapour thermal Deposition10.3390/ma14020459 ↗
72. Formation of stable Si–O–C submonolayers on hydrogen-terminated silicon(111) under low-temperature conditions10.3762/bjnano.6.3 ↗
73. Adsorption behavior and corrosion inhibitive characteristics of newly synthesized cyano-benzylidene xanthenes on copper/sodium hydroxide interface: Electrochemical, X-ray photoelectron spectroscopy and theoretical studies10.1016/j.jcis.2020.06.110 ↗
74. Effects of catalyst surfaces on adsorption revealed by atomic force microscope force spectroscopy: photocatalytic degradation of diuron over zinc oxide10.1039/D0CP02454F ↗
75. Engineering boron and nitrogen codoped carbon nanoarchitectures to tailor molecularly imprinted polymers for PFOS determination10.1016/j.jhazmat.2023.131873 ↗
76. Melamine-modified Boron-doped Diamond towards Enhanced Detection of Adenine, Guanine and Caffeine10.1002/elan.201500528 ↗
77. Improved Mechanical, thermal, and Hydrophobic Properties of PLA Modified with Alkoxysilanes by Reactive Extrusion Process10.3390/polym13152475 ↗
78. Synthesis of Poly(lactic acid)-block-poly(N,N-dimethylaminoethyl methacrylate) Copolymers with Controllable Block Structures via Reversible Addition Fragmentation Polymerization from Aminolyzed Poly(lactic acid)10.1155/2018/7361659 ↗
79. Improved electrochemical detection of metals in biological samples using 3D-printed electrode: Chemical/electrochemical treatment exposes carbon-black conductive sites10.1016/j.electacta.2020.135688 ↗
80. Citrate coated magnetite: a complete magneto dielectric, electrochemical and DFT study for detection and removal of heavy metal ions
81. Sawdust of lam tree (Cordia africana) as alow-cost, sustainable and easily available adsorbent for the removal of toxic metals like Pb(II) and Ni(II) from aqueous solution10.1007/s00107-009-0398-x ↗
82. Functionalized Fe3O4 Nanoparticles as Glassy Carbon Electrode Modifiers for Heavy Metal Ions Detection—A Mini Review10.3390/ma14247725 ↗
83. Effect of pH and temperature on the ion-exchange isotherm of Cd(II) and Pb(II) on clinoptilolite10.1002/jctb.1483 ↗
84. Pb2+ and Cd2+ removal from aqueous solutions onto calcium-phosphate hydroxyl surface: kinetics, isotherms and thermodynamic investigations10.1080/16583655.2025.2504745 ↗
85. 3D-printed monolithic biofilters based on a polylactic acid (PLA) – hydroxyapatite (HAp) composite for heavy metal removal from an aqueous medium10.1039/D1RA05202K ↗
86. Surface functionalization of 3D-printed cellulose-polyamide composite filter for heavy metal removal10.1016/j.ces.2025.123254 ↗
87. Structural studies of complexation of Cu(II) with aminosilane-modified silica surface in heterogeneous system in a wide range of pH10.1016/j.apsusc.2018.11.066 ↗
88. A Review on the Adsorption Isotherms and Design Calculations for the Optimization of Adsorbent Mass and Contact Time10.1021/acsomega.2c08155 ↗
89. Adsorption of Pb2+ and Cd2+ from Aqueous Solutions by Porous Carbon Foam Derived from Biomass Phenolic Resin10.3390/ijms26157302 ↗